A Construction Kit for Efficient Low Power Neural Network Accelerator Designs

Implementing embedded neural network processing at the edge requires efficient hardware acceleration that couples high computational performance with low power consumption. Driven by the rapid evolution of network architectures and their algorithmic features, accelerator designs are constantly updated and improved. To evaluate and compare hardware design choices, designers can refer to a myriad of accelerator implementations in the literature. Surveys provide an overview of these works but are often limited to system-level and benchmark-specific performance metrics, making it difficult to quantitatively compare the individual effect of each utilized optimization technique. This complicates the evaluation of optimizations for new accelerator designs, slowing-down the research progress. This work provides a survey of neural network accelerator optimization approaches that have been used in recent works and reports their individual effects on edge processing performance. It presents the list of optimizations and their quantitative effects as a construction kit, allowing to assess the design choices for each building block separately. Reported optimizations range from up to 10'000x memory savings to 33x energy reductions, providing chip designers an overview of design choices for implementing efficient low power neural network accelerators

DORY: Automatic End-to-End Deployment of Real-World DNNs on Low-Cost IoT MCUs

The deployment of Deep Neural Networks (DNNs) on end-nodes at the extreme edge of the Internet-of-Things is a critical enabler to support pervasive Deep Learning-enhanced applications. Low-Cost MCU-based end-nodes have limited on-chip memory and often replace caches with scratchpads, to reduce area overheads and increase energy efficiency -- requiring explicit DMA-based memory transfers between different levels of the memory hierarchy. Mapping modern DNNs on these systems requires aggressive topology-dependent tiling and double-buffering. In this work, we propose DORY (Deployment Oriented to memoRY) - an automatic tool to deploy DNNs on low cost MCUs with typically less than 1MB of on-chip SRAM memory. DORY abstracts tiling as a Constraint Programming (CP) problem: it maximizes L1 memory utilization under the topological constraints imposed by each DNN layer. Then, it generates ANSI C code to orchestrate off- and on-chip transfers and computation phases. Furthermore, to maximize speed, DORY augments the CP formulation with heuristics promoting performance-effective tile sizes. As a case study for DORY, we target GreenWaves Technologies GAP8, one of the most advanced parallel ultra-low power MCU-class devices on the market. On this device, DORY achieves up to 2.5x better MAC/cycle than the GreenWaves proprietary software solution and 18.1x better than the state-of-the-art result on an STM32-F746 MCU on single layers. Using our tool, GAP-8 can perform end-to-end inference of a 1.0-MobileNet-128 network consuming just 63 pJ/MAC on average @ 4.3 fps - 15.4x better than an STM32-F746. We release all our developments - the DORY framework, the optimized backend kernels, and the related heuristics - as open-source software.Comment: 14 pages, 12 figures, 4 tables, 2 listings. Accepted for publication in IEEE Transactions on Computers (https://ieeexplore.ieee.org/document/9381618

A 64mW DNN-based Visual Navigation Engine for Autonomous Nano-Drones

Fully-autonomous miniaturized robots (e.g., drones), with artificial intelligence (AI) based visual navigation capabilities are extremely challenging drivers of Internet-of-Things edge intelligence capabilities. Visual navigation based on AI approaches, such as deep neural networks (DNNs) are becoming pervasive for standard-size drones, but are considered out of reach for nanodrones with size of a few cm${}^\mathrm{2}$. In this work, we present the first (to the best of our knowledge) demonstration of a navigation engine for autonomous nano-drones capable of closed-loop end-to-end DNN-based visual navigation. To achieve this goal we developed a complete methodology for parallel execution of complex DNNs directly on-bard of resource-constrained milliwatt-scale nodes. Our system is based on GAP8, a novel parallel ultra-low-power computing platform, and a 27 g commercial, open-source CrazyFlie 2.0 nano-quadrotor. As part of our general methodology we discuss the software mapping techniques that enable the state-of-the-art deep convolutional neural network presented in [1] to be fully executed on-board within a strict 6 fps real-time constraint with no compromise in terms of flight results, while all processing is done with only 64 mW on average. Our navigation engine is flexible and can be used to span a wide performance range: at its peak performance corner it achieves 18 fps while still consuming on average just 3.5% of the power envelope of the deployed nano-aircraft.Comment: 15 pages, 13 figures, 5 tables, 2 listings, accepted for publication in the IEEE Internet of Things Journal (IEEE IOTJ

XpulpNN: Enabling Energy Efficient and Flexible Inference of Quantized Neural Networks on RISC-V Based IoT End Nodes

Heavily quantized fixed-point arithmetic is becoming a common approach to deploy Convolutional Neural Networks (CNNs) on limited-memory low-power IoT end-nodes. However, this trend is narrowed by the lack of support for low-bitwidth in the arithmetic units of state-of-the-art embedded Microcontrollers (MCUs). This work proposes a multi-precision arithmetic unit fully integrated into a RISC-V processor at the micro-architectural and ISA level to boost the efficiency of heavily Quantized Neural Network (QNN) inference on microcontroller-class cores. By extending the ISA with nibble (4-bit) and crumb (2-bit) SIMD instructions, we show near-linear speedup with respect to higher precision integer computation on the key kernels for QNN computation. Also, we propose a custom execution paradigm for SIMD sum-of-dot-product operations, which consists of fusing a dot product with a load operation, with an up to 1.64 × peak MAC/cycle improvement compared to a standard execution scenario. To further push the efficiency, we integrate the RISC-V extended core in a parallel cluster of 8 processors, with near-linear improvement with respect to a single core architecture. To evaluate the proposed extensions, we fully implement the cluster of processors in GF22FDX technology. QNN convolution kernels on a parallel cluster implementing the proposed extension run 6 × and 8 × faster when considering 4- and 2-bit data operands, respectively, compared to a baseline processing cluster only supporting 8-bit SIMD instructions. With a peak of 2.22 TOPs/s/W, the proposed solution achieves efficiency levels comparable with dedicated DNN inference accelerators and up to three orders of magnitude better than state-of-the-art ARM Cortex-M based microcontroller systems such as the low-end STM32L4 MCU and the high-end STM32H7 MCU

Latency and accuracy optimized mobile face detection

Abstract. Face detection is a preprocessing step in many computer vision applications. Important factors are accuracy, inference duration, and energy efficiency of the detection framework. Computationally light detectors that execute in real-time are a requirement for many application areas, such as face tracking and recognition. Typical operating platforms in everyday use are smartphones and embedded devices, which have limited computation capacity. The capability of face detectors is comparable to the ability of a human in easy detection tasks. When the conditions change, the challenges become different. Current challenges in face detection include atypically posed and tiny faces. Partially occluded faces and dim or bright environments pose challenges for detection systems. State-of-the-art performance in face detection research employs deep learning methods called neural networks, which loosely imitate the mammalian brain system. The most relevant technologies are convolutional neural networks, which are designed for local feature description. In this thesis, the main computational optimization approach is neural network quantization. The network models were delegated to digital signal processors and graphics processing units. Quantization was shown to reduce the latency of computation substantially. The most energy-efficient inference was achieved through digital signal processor delegation. Multithreading was used for inference acceleration. It reduced the amount of energy consumption per algorithm run.Latenssi- ja tarkkuusoptimoitu kasvontunnistus mobiililaitteilla. Tiivistelmä. Kasvojen ilmaisu on esikäsittelyvaihe monelle konenäön sovellukselle. Tärkeitä kasvoilmaisimen ominaisuuksia ovat tarkkuus, energiatehokkuus ja suoritusnopeus. Monet sovellukset vaativat laskennallisesti kevyitä ilmaisimia, jotka toimivat reaaliajassa. Esimerkkejä sovelluksista ovat kasvojen seuranta- ja tunnistusjärjestelmät. Yleisiä käyttöalustoja ovat älypuhelimet ja sulautetut järjestelmät, joiden laskentakapasiteetti on rajallinen. Kasvonilmaisimien tarkkuus vastaa ihmisen kykyä helpoissa ilmaisuissa. Nykyiset ongelmat kasvojen ilmaisussa liittyvät epätyypillisiin asentoihin ja erityisen pieniin kasvokokoihin. Myös kasvojen osittainen peittyminen, ja pimeät ja kirkkaat ympäristöt, vaikeuttavat ilmaisua. Neuroverkkoja käytetään tekoälyjärjestelmissä, joiden lähtökohtana on ollut mallintaa nisäkkäiden aivojen toimintaa. Konvoluutiopohjaiset neuroverkot ovat erikoistuneet paikallisten piirteiden analysointiin. Tässä opinnäytetyössä käytetty laskennallisen optimoinnin menetelmä on neuroverkkojen kvantisointi. Neuroverkkojen ajo delegoitiin digitaalisille signaalinkäsittely- ja grafiikkasuorittimille. Kvantisoinnin osoitettiin vähentävän laskenta-aikaa huomattavasti ja suurin energiatehokkuus saavutettiin digitaalisen signaaliprosessorin avulla. Suoritusnopeutta lisättiin monisäikeistyksellä, jonka havaittiin vähentävän energiankulutusta

Efficient Hardware Architectures for Accelerating Deep Neural Networks: Survey

In the modern-day era of technology, a paradigm shift has been witnessed in the areas involving applications of Artificial Intelligence (AI), Machine Learning (ML), and Deep Learning (DL). Specifically, Deep Neural Networks (DNNs) have emerged as a popular field of interest in most AI applications such as computer vision, image and video processing, robotics, etc. In the context of developed digital technologies and the availability of authentic data and data handling infrastructure, DNNs have been a credible choice for solving more complex real-life problems. The performance and accuracy of a DNN is a way better than human intelligence in certain situations. However, it is noteworthy that the DNN is computationally too cumbersome in terms of the resources and time to handle these computations. Furthermore, general-purpose architectures like CPUs have issues in handling such computationally intensive algorithms. Therefore, a lot of interest and efforts have been invested by the research fraternity in specialized hardware architectures such as Graphics Processing Unit (GPU), Field Programmable Gate Array (FPGA), Application Specific Integrated Circuit (ASIC), and Coarse Grained Reconfigurable Array (CGRA) in the context of effective implementation of computationally intensive algorithms. This paper brings forward the various research works carried out on the development and deployment of DNNs using the aforementioned specialized hardware architectures and embedded AI accelerators. The review discusses the detailed description of the specialized hardware-based accelerators used in the training and/or inference of DNN. A comparative study based on factors like power, area, and throughput, is also made on the various accelerators discussed. Finally, future research and development directions are discussed, such as future trends in DNN implementation on specialized hardware accelerators. This review article is intended to serve as a guide for hardware architectures for accelerating and improving the effectiveness of deep learning research.publishedVersio