Human-centered Electric Prosthetic (HELP) Hand

Through a partnership with Indian non-profit Bhagwan Mahaveer Viklang Sahayata Samiti, we designed a functional, robust, and and low cost electrically powered prosthetic hand that communicates with unilateral, transradial, urban Indian amputees through a biointerface. The device uses compliant tendon actuation, a small linear servo, and a wearable garment outfitted with flex sensors to produce a device that, once placed inside a prosthetic glove, is anthropomorphic in both look and feel. The prosthesis was developed such that future groups can design for manufacturing and distribution in India

On the development of a cybernetic prosthetic hand

The human hand is the end organ of the upper limb, which in humans serves the important function of prehension, as well as being an important organ for sensation and communication. It is a marvellous example of how a complex mechanism can be implemented, capable of realizing very complex and useful tasks using a very effective combination of mechanisms, sensing, actuation and control functions. In this thesis, the road towards the realization of a cybernetic hand has been presented. After a detailed analysis of the model, the human hand, a deep review of the state of the art of artificial hands has been carried out. In particular, the performance of prosthetic hands used in clinical practice has been compared with the research prototypes, both for prosthetic and for robotic applications. By following a biomechatronic approach, i.e. by comparing the characteristics of these hands with the natural model, the human hand, the limitations of current artificial devices will be put in evidence, thus outlining the design goals for a new cybernetic device. Three hand prototypes with a high number of degrees of freedom have been realized and tested: the first one uses microactuators embedded inside the structure of the fingers, and the second and third prototypes exploit the concept of microactuation in order to increase the dexterity of the hand while maintaining the simplicity for the control. In particular, a framework for the definition and realization of the closed-loop electromyographic control of these devices has been presented and implemented. The results were quite promising, putting in evidence that, in the future, there could be two different approaches for the realization of artificial devices. On one side there could be the EMG-controlled hands, with compliant fingers but only one active degree of freedom. On the other side, more performing artificial hands could be directly interfaced with the peripheral nervous system, thus establishing a bi-directional communication with the human brain

The role of morphology of the thumb in anthropomorphic grasping : a review

The unique musculoskeletal structure of the human hand brings in wider dexterous capabilities to grasp and manipulate a repertoire of objects than the non-human primates. It has been widely accepted that the orientation and the position of the thumb plays an important role in this characteristic behavior. There have been numerous attempts to develop anthropomorphic robotic hands with varying levels of success. Nevertheless, manipulation ability in those hands is to be ameliorated even though they can grasp objects successfully. An appropriate model of the thumb is important to manipulate the objects against the fingers and to maintain the stability. Modeling these complex interactions about the mechanical axes of the joints and how to incorporate these joints in robotic thumbs is a challenging task. This article presents a review of the biomechanics of the human thumb and the robotic thumb designs to identify opportunities for future anthropomorphic robotic hands

Mechanical design of a biologically inspired prosthetic hand, the touch hand 3.

Masters Degrees. University of KwaZulu-Natal. Durban.The Touch hand 3 was developed to improve on the mechanical and mechatronic design of the Touch hand 2. A basic prototype hand was rapidly developed using 3D CAD software and 3D printing and tested on an amputee. The improvements in the final design included an improved finger actuation system utilizing mechanical linkages, an improved Electromyography (EMG) operated control system, four micro-linear servo-motors, modular fingers, hinges and chassis. The final design was designed such that the hand can be easily interchanged between a fully mechatronic system and full mechanically operated system using the same generic parts including the chassis, finger and wrist components. The hands were both tested with the Yale Open Hand test, a test used to assess robotic grippers. The Southampton Hand Assessment Procedure (SHAP), a test usually used to assess the effectiveness of upper limb prostheses, was also carried out on both versions of the hand. The hands were also tested with a hand dynamometer to assess their grip strength. The hand were compared to current hands on the market and their strength and weaknesses analysed

Cost-Effective Prosthetic Hand for Amputees: Challenges and Practical Implementation

According to statistics, approximately 160,000 people in Malaysia, out of the current population of 32 million, need prosthetic or orthotic equipment. For individuals who have experienced upper extremity amputations, significant challenges are posed by the loss of functionality and the desire for a cosmetically appealing solution. To address this issue, a cost-effective prosthetic hand was proposed and developed. An overview of existing prosthetic hands is also offered, with an emphasis on cost-effectiveness, challenges, strengths, and weaknesses. The developed prosthetic hand incorporates a practical and underactuated finger mechanism. It is equipped with controllers based on EMG sensors to ensure that optimal responses are achieved during the grasping and releasing of objects. A suitable motor was carefully chosen to facilitate effective grasping and ungrasping activities. The proposed design was realized using SolidWorks and a 3D Printer. The capabilities of the prosthetic hand were demonstrated through a series of tests involving various objects, including pliers, a screwdriver, and a phone. The results indicate that objects of different sizes and shapes can be effectively grasped and ungrasped by the prosthetic hand. The unique bending angles in each finger result from the way tendons are connected via flexible cords and fishing lines to the servo motor. This design allows for a dynamic response based on the user's muscle flex and strength. The affordability of this cost-effective prosthetic hand demonstrates its potential as a practical and viable solution for amputees aiming to restore their grasping functionalities

Cost-Effective Prosthetic Hand for Amputees: Challenges and Practical Implementation

According to statistics, approximately 160,000 people in Malaysia, out of the current population of 32 million, need prosthetic or orthotic equipment. For individuals who have experienced upper extremity amputations, significant challenges are posed by the loss of functionality and the desire for a cosmetically appealing solution. To address this issue, a cost-effective prosthetic hand was proposed and developed. An overview of existing prosthetic hands is also offered, with an emphasis on cost-effectiveness, challenges, strengths, and weaknesses. The developed prosthetic hand incorporates a practical and underactuated finger mechanism. It is equipped with controllers based on EMG sensors to ensure that optimal responses are achieved during the grasping and releasing of objects. A suitable motor was carefully chosen to facilitate effective grasping and ungrasping activities. The proposed design was realized using SolidWorks and a 3D Printer. The capabilities of the prosthetic hand were demonstrated through a series of tests involving various objects, including pliers, a screwdriver, and a phone. The results indicate that objects of different sizes and shapes can be effectively grasped and ungrasped by the prosthetic hand. The unique bending angles in each finger result from the way tendons are connected via flexible cords and fishing lines to the servo motor. This design allows for a dynamic response based on the user's muscle flex and strength. The affordability of this cost-effective prosthetic hand demonstrates its potential as a practical and viable solution for amputees aiming to restore their grasping functionalities

The SmartHand transradial prosthesis

<p>Abstract</p> <p>Background</p> <p>Prosthetic components and control interfaces for upper limb amputees have barely changed in the past 40 years. Many transradial prostheses have been developed in the past, nonetheless most of them would be inappropriate if/when a large bandwidth human-machine interface for control and perception would be available, due to either their limited (or inexistent) sensorization or limited dexterity. <it>SmartHand </it>tackles this issue as is meant to be clinically experimented in amputees employing different neuro-interfaces, in order to investigate their effectiveness. This paper presents the design and on bench evaluation of the SmartHand.</p> <p>Methods</p> <p>SmartHand design was bio-inspired in terms of its physical appearance, kinematics, sensorization, and its multilevel control system. Underactuated fingers and differential mechanisms were designed and exploited in order to fit all mechatronic components in the size and weight of a natural human hand. Its sensory system was designed with the aim of delivering significant afferent information to the user through adequate interfaces.</p> <p>Results</p> <p>SmartHand is a five fingered self-contained robotic hand, with 16 degrees of freedom, actuated by 4 motors. It integrates a bio-inspired sensory system composed of 40 proprioceptive and exteroceptive sensors and a customized embedded controller both employed for implementing automatic grasp control and for potentially delivering sensory feedback to the amputee. It is able to perform everyday grasps, count and independently point the index. The weight (530 g) and speed (closing time: 1.5 seconds) are comparable to actual commercial prostheses. It is able to lift a 10 kg suitcase; slippage tests showed that within particular friction and geometric conditions the hand is able to stably grasp up to 3.6 kg cylindrical objects.</p> <p>Conclusions</p> <p>Due to its unique embedded features and human-size, the SmartHand holds the promise to be experimentally fitted on transradial amputees and employed as a bi-directional instrument for investigating -during realistic experiments- different interfaces, control and feedback strategies in neuro-engineering studies.</p

Designing Prosthetic Hands With Embodied Intelligence: The KIT Prosthetic Hands

Hand prostheses should provide functional replacements of lost hands. Yet current prosthetic hands often are not intuitive to control and easy to use by amputees. Commercially available prostheses are usually controlled based on EMG signals triggered by the user to perform grasping tasks. Such EMG-based control requires long training and depends heavily on the robustness of the EMG signals. Our goal is to develop prosthetic hands with semi-autonomous grasping abilities that lead to more intuitive control by the user. In this paper, we present the development of prosthetic hands that enable such abilities as first results toward this goal. The developed prostheses provide intelligent mechatronics including adaptive actuation, multi-modal sensing and on-board computing resources to enable autonomous and intuitive control. The hands are scalable in size and based on an underactuated mechanism which allows the adaptation of grasps to the shape of arbitrary objects. They integrate a multi-modal sensor system including a camera and in the newest version a distance sensor and IMU. A resource-aware embedded system for in-hand processing of sensory data and control is included in the palm of each hand. We describe the design of the new version of the hands, the female hand prosthesis with a weight of 377 g, a grasping force of 40.5 N and closing time of 0.73 s. We evaluate the mechatronics of the hand, its grasping abilities based on the YCB Gripper Assessment Protocol as well as a task-oriented protocol for assessing the hand performance in activities of daily living. Further, we exemplarily show the suitability of the multi-modal sensor system for sensory-based, semi-autonomous grasping in daily life activities. The evaluation demonstrates the merit of the hand concept, its sensor and in-hand computing systems

Nonlinear control strategy for a cost effective myoelectric prosthetic hand

The loss of a limb tremendously impacts the life of the affected individual. In the past decades, researchers have been developing artificial limbs that may return some of the missing functions and cosmetics. However, the development of dexterous mechanisms capable of mimicking the function of the human hand is a complex venture. Even though myoelectric prostheses have advanced, several issues remain to be solved before an artificial limb may be comparable to its human counterpart. Moreover, the high cost of advanced limbs prevents their widespread use among the low-income population. This dissertation presents a strategy for the low-level of control of a cost effective robotic hand for prosthetic applications. The main purpose of this work is to reduce the high cost associated with limb replacement. The presented strategy uses an electromyographic signal classifier, which detects user intent by classifying 4 different wrist movements. This information is supplied as 4 different pre-shapes of the robotic hand to the low-level of control for safely and effectively performing the grasping tasks. Two proof-of-concept prototypes were implemented, consisting on five-finger underactuated hands driven by inexpensive DC motors and equipped with low-cost sensors. To overcome the limitations and nonlinearities of inexpensive components, a multi-stage control methodology was designed for modulating the grasping force based on slippage detection and nonlinear force control. A multi-stage control methodology for modulating the grasping force based on slippage detection and nonlinear force control was designed. The two main stages of the control strategy are the force control stage and the detection stage. The control strategy uses the force control stage to maintain a constant level of force over the object. The results of the experiments performed over this stage showed a rising time of less than 1 second, force overshoot of less than 1 N and steady state error of less than 0.15 N. The detection stage is used to monitor any sliding of the object from the hand. The experiments performed over this stage demonstrated a delay in the slip detection process of less than 200 milliseconds. The initial force, and the amount of force incremented after sliding is detected, were adjusted to reduce object displacement. Experiments were then performed to test the control strategy on situations often encountered in the ADL. The results showed that the control strategy was able to detect the dynamic changes in mass of the object and to successfully adjust the grasping force to prevent the object from dropping. The evaluation of the proposed control strategy suggests that this methodology can overcome the limitation of inexpensive sensors and actuators. Therefore, this control strategy may reduce the cost of current myoelectric prosthesis. We believe that the work presented here is a major step towards the development of a cost effective myoelectric prosthetic hand