Acetone Gas Sensing Properties of a Multiple-Networked Fe 2

Fe2O3-decorated CuO nanorods were prepared by Cu thermal oxidation followed by Fe2O3 decoration via a solvothermal route. The acetone gas sensing properties of multiple-networked pristine and Fe2O3-decorated CuO nanorod sensors were examined. The optimal operating temperature of the sensors was found to be 240°C. The pristine and Fe2O3-decorated CuO nanorod sensors showed responses of 586 and 1,090%, respectively, to 1,000 ppm of acetone at 240°C. The Fe2O3-decorated CuO nanorod sensor also showed faster response and recovery than the latter sensor. The acetone gas sensing mechanism of the Fe2O3-decorated CuO nanorod sensor is discussed in detail. The origin of the enhanced sensing performance of the multiple-networked Fe2O3-decorated CuO nanorod sensor to acetone gas was explained by modulation of the potential barrier at the Fe2O3-CuO interface, highly catalytic activity of Fe2O3 for acetone oxidation, and the creation of active adsorption sites by Fe2O3 nanoparticles

The impact of MOSFET-based sensors

The basic structure as well as the physical existence of the MOS field-effect transistor is without doubt of great importance for the development of a whole series of sensors for the measurement of physical and chemical environmental parameters.\ud \ud The equation for the MOSFET drain current already shows a number of parameters that can be directly influences by an external quantity, but small technological variations of the original MOSFET configuration also give rise to a large number of sensing properties. All devices have in common that a surface charge is measured in a silicon chip, depending on an electric field in the adjacent insulator.\ud \ud FET-based sensors such as the GASFET, OGFET, ADFET, SAFET, CFT, PRESSFET, ISFET, CHEMFET, REFET, ENFET, IMFET, BIOFET, etc. developed up to the present or those to be developed in the near future will be discussed in relation to the considerations mentioned above

Gas sensing based on optical fibre coupled diode laser spectroscopy : a new approach to sensor systems for safety monitoring

We describe an entirely passive fibre optic network which senses, amongst other species, CH¬4¬ and CO¬¬2 , with sensitivity and selectivity compatible with safety sensing in the mine environment. The basic principle is that a single laser diode source targeted to a particular species addresses up to 200 sensing points which may be spread over an area of dimensions ten or more km. The detection and processing electronics is typically located with the laser source. Several laser sources can be introduced in parallel to enable monitoring multiple species. The network itself, entirely linked through optical fibre, is inherently intrinsically safe. It is self checking for faults at the sensing location and continuously self calibrating. In the methane sensing mode its sensitivity is sub 100ppm and it responds accurately up to 100% methane. It is therefore capable of detecting extremely hazardous gas pockets which are completely missed by other sensor technologies. The network has demonstrated stability with zero maintenance or recalibration over periods in excess of two years. We believe that this system offers unique benefits in the context of mine safety and ventilation system monitoring

Graphene functionalised by laser ablated V2O5 as highly sensitive NH3 sensor

Graphene has been recognized as a promising gas sensing material. The response of graphene-based sensors can be radically improved by introducing defects in graphene using, e. g., metal or metal oxide nanoparticles. We have functionalised CVD grown, single layer graphene by applying pulsed laser deposition (PLD) of V2O5 which resulted in a thin V2O5 layer on graphene with average thickness of ~0.6 nm. According to Raman analysis, PLD process also induced defects in graphene. Compared to unmodified graphene, the obtained chemiresistive sensor showed considerable improvement of sensing ammonia at room temperature. In addition, also the response time, sensitivity and reversibility were essentially enhanced due to graphene functionalisation by laser deposited V2O5. This can be explained by increased surface density of gas adsorption sites introduced by high energy atoms in laser ablation plasma and formation of nanophase boundaries between deposited V2O5 and graphene.Comment: 22 pages, 6 figure

Coal mine low power laser methane detection and alarm instrument

At present, the portable carrier catalytic methane detection and alarm instrument for coal mine generally has many problems, such as high power consumption, short standby time, low detection accuracy, few parameters and single function, which can not meet the rapid development needs of mine safety. In this paper, a low power portable laser methane detection and alarm instrument based on tunable laser absorption spectroscopy (TDLAS) is designed. The instrument can detect methane concentration, ambient temperature and ambient pressure at the same time. It has the functions of sound and light alarm, historical data storage and query, and integrates Wi-Fi to realize data wireless transmission. The instrument can work continuously for 36 hours, and the response time is less than 15 seconds. It has the function of self-diagnosis. The overall performance of the instrument has been greatly improved compared with the traditional mine methane portable instrument. A mobile methane alarm Internet of things(IOT) system for coal mine based on portable instrument has been developed, which realizes real-time upload of data and cloud analysis, makes the traditional mine gas monitoring and control system powerfully supplemented, greatly improves the detection level of coal mine gas, and has broad application prospects

A survey and analysis of commercially available hydrogen sensors

The performance requirements for hydrogen detection in aerospace applications often exceed those of more traditional applications. In order to ascertain the applicability of existing hydrogen sensors to aerospace applications, a survey was conducted of commercially available point-contact hydrogen sensors, and their operation was analyzed. The operation of the majority of commercial hydrogen sensors falls into four main categories: catalytic combustion, electrochemical, semiconducting oxide sensors, and thermal conductivity detectors. The physical mechanism involved in hydrogen detection for each main category is discussed in detail. From an understanding of the detection mechanism, each category of sensor is evaluated for use in a variety of space and propulsion environments. In order to meet the needs of aerospace applications, the development of point-contact hydrogen sensors that are based on concepts beyond those used in commercial sensors is necessary

Application and research of wireless laser methane sensor in drainage pipeline monitoring

Laser methane sensor has been widely promoted and successfully applied in coal mines as a new and effective technology building on the approach of laser-based absorption detection. Compared with the traditional catalytic methane sensor, the laser methane sensor discussed offers the important advantages of a long calibration period, high detection precision, the absence of zero drift and low power consumption, all of which are significant advantages for use in coal mining applications. By compensating for the temperature and pressure of the gases present, the accuracy of the methane sensor is evident across a wide range of temperatures and pressures, making it suitable for gas detection, including methane, in pipelines as well. The wireless laser approach which is incorporated into the methane sensor allows wireless transmission and data uploading to a cloud server through NB-IoT. This tackles the problem in gas pipeline monitoring of the length of many pipelines and thus the wide distribution of the sensors, avoiding complicated wiring and thus high associated cost. Further, remote data management can then be achieved, all of which greatly improves the flexibility and security of the management of the pipeline and the data generated

Study of long term atmospheric trace contaminant monitoring and control Final report

Environmental control and life support subsystem for monitoring and controlling trace contaminants in spacecraft cabin atmospher