Cycle time optimization by timing driven placement with simultaneous netlist transformations

We present new concepts to integrate logic synthesis and physical design. Our methodology uses general Boolean transformations as known from technology-independent synthesis, and a recursive bi-partitioning placement algorithm. In each partitioning step, the precision of the layout data increases. This allows effective guidance of the logic synthesis operations for cycle time optimization. An additional advantage of our approach is that no complicated layout corrections are needed when the netlist is changed

High Level Synthesis for Packet Processing Pipelines

Packet processing is an essential function of state-of-the-art network routers and switches. Implementing packet processors in pipelined architectures is a well-known, established technique, albeit different approaches have been proposed. The design of packet processing pipelines is a delicate trade-off between the desire for abstract specifications, short development time, and design maintainability on one hand and very aggressive performance requirements on the other. This thesis proposes a coherent design flow for packet processing pipelines. Like the design process itself, I start by introducing a novel domain-specific language that provides a high-level specification of the pipeline. Next, I address synthesizing this model and calculating its worst-case throughput. Finally, I address some specific circuit optimization issues. I claim, based on experimental results, that my proposed technique can dramatically improve the design process of these pipelines, while the resulting performance matches the expectations of hand-crafted design. The considered pipelines exhibit a pseudo-linear topology, which can be too restrictive in the general case. However, especially due to its high performance, such an architecture may be suitable for applications outside packet processing, in which case some of my proposed techniques could be easily adapted. Since I ran my experiments on FPGAs, this work has an inherent bias towards that technology; however, most results are technology-independent

Energy-Efficient Digital Circuit Design using Threshold Logic Gates

abstract: Improving energy efficiency has always been the prime objective of the custom and automated digital circuit design techniques. As a result, a multitude of methods to reduce power without sacrificing performance have been proposed. However, as the field of design automation has matured over the last few decades, there have been no new automated design techniques, that can provide considerable improvements in circuit power, leakage and area. Although emerging nano-devices are expected to replace the existing MOSFET devices, they are far from being as mature as semiconductor devices and their full potential and promises are many years away from being practical. The research described in this dissertation consists of four main parts. First is a new circuit architecture of a differential threshold logic flipflop called PNAND. The PNAND gate is an edge-triggered multi-input sequential cell whose next state function is a threshold function of its inputs. Second a new approach, called hybridization, that replaces flipflops and parts of their logic cones with PNAND cells is described. The resulting \hybrid circuit, which consists of conventional logic cells and PNANDs, is shown to have significantly less power consumption, smaller area, less standby power and less power variation. Third, a new architecture of a field programmable array, called field programmable threshold logic array (FPTLA), in which the standard lookup table (LUT) is replaced by a PNAND is described. The FPTLA is shown to have as much as 50% lower energy-delay product compared to conventional FPGA using well known FPGA modeling tool called VPR. Fourth, a novel clock skewing technique that makes use of the completion detection feature of the differential mode flipflops is described. This clock skewing method improves the area and power of the ASIC circuits by increasing slack on timing paths. An additional advantage of this method is the elimination of hold time violation on given short paths. Several circuit design methodologies such as retiming and asynchronous circuit design can use the proposed threshold logic gate effectively. Therefore, the use of threshold logic flipflops in conventional design methodologies opens new avenues of research towards more energy-efficient circuits.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Synthesis and Verification of Digital Circuits using Functional Simulation and Boolean Satisfiability.

The semiconductor industry has long relied on the steady trend of transistor scaling, that is, the shrinking of the dimensions of silicon transistor devices, as a way to improve the cost and performance of electronic devices. However, several design challenges have emerged as transistors have become smaller. For instance, wires are not scaling as fast as transistors, and delay associated with wires is becoming more significant. Moreover, in the design flow for integrated circuits, accurate modeling of wire-related delay is available only toward the end of the design process, when the physical placement of logic units is known. Consequently, one can only know whether timing performance objectives are satisfied, i.e., if timing closure is achieved, after several design optimizations. Unless timing closure is achieved, time-consuming design-flow iterations are required. Given the challenges arising from increasingly complex designs, failing to quickly achieve timing closure threatens the ability of designers to produce high-performance chips that can match continually growing consumer demands. In this dissertation, we introduce powerful constraint-guided synthesis optimizations that take into account upcoming timing closure challenges and eliminate expensive design iterations. In particular, we use logic simulation to approximate the behavior of increasingly complex designs leveraging a recently proposed concept, called bit signatures, which allows us to represent a large fraction of a complex circuit's behavior in a compact data structure. By manipulating these signatures, we can efficiently discover a greater set of valid logic transformations than was previously possible and, as a result, enhance timing optimization. Based on the abstractions enabled through signatures, we propose a comprehensive suite of novel techniques: (1) a fast computation of circuit don't-cares that increases restructuring opportunities, (2) a verification methodology to prove the correctness of speculative optimizations that efficiently utilizes the computational power of modern multi-core systems, and (3) a physical synthesis strategy using signatures that re-implements sections of a critical path while minimizing perturbations to the existing placement. Our results indicate that logic simulation is effective in approximating the behavior of complex designs and enables a broader family of optimizations than previous synthesis approaches.Ph.D.Computer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/61793/1/splaza_1.pd

Speeding Up Technology-Independent Timing Optimization by Network Partitioning

Abstract Technology-independenttiming optimizationis an importantproblem in logic synthesis. Although many promising techniques have been proposed in the past, unfortunately they are quite slow and thus impractical for large networks. In this paper, we propose DE-PART, a delay-basedpartitioner-cum-optimizer, which purports to solve this problem. Given a combinational logic network that is to be optimized for timing, DEPART divides it into sub-networks using timing information and a constraint on the maximum number of gates allowed in a single sub-network. These sub-networks are then dispatched, one by one, to a standard timing optimizer. The optimized sub-networks are re-glued, generating an optimized network. The challenge is how to partition the original network into sub-networks so that the nal solution quality after partitioning and optimization is comparable to that from the timing optimizer. We propose a partitioning technique that is timing-driven and is simple yet e ective. We compare DEPART with speed up 21 , a state-of-the-art timing optimization tool, and with various partitioning techniques such as min-cut based and region growing, on a suite of large industrial and ISCAS circuits. On more than half of the benchmarks, DEPART yields run-time improvements of 20 to 450 times over a normal invocation of speed up the overall average improvement being 8 times, without compromising the solution quality m uch. Min-cut and region growing partitioning schemes, not being timing-driven, perform poorly in terms of the nal circuit delay

Covering conditions and algorithms for the synthesis of speed-independent circuits

Journal ArticleAbstract-This paper presents theory and algorithms for the synthesis of standard C-implementations of speed-independent circuits. These implementations are block-level circuits which may consist of atomic gates to perform complex functions in order to ensure hazard freedom. First, we present Boolean covering conditions that guarantee that the standard C-implementations operate correctly. Then, we present two algorithms that produce optimal solutions to the covering problem. The first algorithm is always applicable, but does not complete on large circuits. The second algorithm, motivated by our observation that our covering problem can often be solved with a single cube, finds the optimal single-cube solution when such a solution exists. When applicable, the second algorithm is dramatically more efficient than the first, more general algorithm. We present results for benchmark specifications which indicate that our single-cube algorithm is applicable on most benchmark circuits and reduces run times by over an order of magnitude. The block-level circuits generated by our algorithms are a good starting point for tools that perform technology mapping to obtain gate-level speed independent circuits

Interpreted graph models

A model class called an Interpreted Graph Model (IGM) is defined. This class includes a large number of graph-based models that are used in asynchronous circuit design and other applications of concurrecy. The defining characteristic of this model class is an underlying static graph-like structure where behavioural semantics are attached using additional entities, such as tokens or node/arc states. The similarities in notation and expressive power allow a number of operations on these formalisms, such as visualisation, interactive simulation, serialisation, schematic entry and model conversion to be generalised. A software framework called Workcraft was developed to take advantage of these properties of IGMs. Workcraft provides an environment for rapid prototyping of graph-like models and related tools. It provides a large set of standardised functions that considerably facilitate the task of providing tool support for any IGM. The concept of Interpreted Graph Models is the result of research on methods of application of lower level models, such as Petri nets, as a back-end for simulation and verification of higher level models that are more easily manipulated. The goal is to achieve a high degree of automation of this process. In particular, a method for verification of speed-independence of asynchronous circuits is presented. Using this method, the circuit is specified as a gate netlist and its environment is specified as a Signal Transition Graph. The circuit is then automatically translated into a behaviourally equivalent Petri net model. This model is then composed with the specification of the environment. A number of important properties can be established on this compound model, such as the absence of deadlocks and hazards. If a trace is found that violates the required property, it is automatically interpreted in terms of switching of the gates in the original gate-level circuit specification and may be presented visually to the circuit designer. A similar technique is also used for the verification of a model called Static Data Flow Structure (SDFS). This high level model describes the behaviour of an asynchronous data path. SDFS is particularly interesting because it models complex behaviours such as preemption, early evaluation and speculation. Preemption is a technique which allows to destroy data objects in a computation pipeline if the result of computation is no longer needed, reducing the power consumption. Early evaluation allows a circuit to compute the output using a subset of its inputs and preempting the inputs which are not needed. In speculation, all conflicting branches of computation run concurrently without waiting for the selecting condition; once the selecting condition is computed the unneeded branches are preempted. The automated Petri net based verification technique is especially useful in this case because of the complex nature of these features. As a result of this work, a number of cases are presented where the concept of IGMs and the Workcraft tool were instrumental. These include the design of two different types of arbiter circuits, the design and debugging of the SDFS model, synthesis of asynchronous circuits from the Conditional Partial Order Graph model and the modification of the workflow of Balsa asynchronous circuit synthesis system.EThOS - Electronic Theses Online ServiceEPSRCGBUnited Kingdo

Approximate logic circuits: Theory and applications

CMOS technology scaling, the process of shrinking transistor dimensions based on Moore's law, has been the thrust behind increasingly powerful integrated circuits for over half a century. As dimensions are scaled to few tens of nanometers, process and environmental variations can significantly alter transistor characteristics, thus degrading reliability and reducing performance gains in CMOS designs with technology scaling. Although design solutions proposed in recent years to improve reliability of CMOS designs are power-efficient, the performance penalty associated with these solutions further reduces performance gains with technology scaling, and hence these solutions are not well-suited for high-performance designs. This thesis proposes approximate logic circuits as a new logic synthesis paradigm for reliable, high-performance computing systems. Given a specification, an approximate logic circuit is functionally equivalent to the given specification for a "significant" portion of the input space, but has a smaller delay and power as compared to a circuit implementation of the original specification. This contributions of this thesis include (i) a general theory of approximation and efficient algorithms for automated synthesis of approximations for unrestricted random logic circuits, (ii) logic design solutions based on approximate circuits to improve reliability of designs with negligible performance penalty, and (iii) efficient decomposition algorithms based on approxiiii mate circuits to improve performance of designs during logic synthesis. This thesis concludes with other potential applications of approximate circuits and identifies. open problems in logic decomposition and approximate circuit synthesis