Synthesis of all-digital delay lines

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other worksThe synthesis of delay lines (DLs) is a core task during the generation of matched delays, ring oscillator clocks or delay monitors. The main figure of merit of a DL is the fidelity to track variability. Unfortunately, complex systems have a great diversity of timing paths that exhibit different sensitivities to static and dynamic variations. Designing DLs that capture this diversity is an ardous task. This paper proposes an algorithmic approach for the synthesis of DLs that can be integrated in a conventional design flow. The algorithm uses heuristics to perform a combinatorial search in a vast space of solutions that combine different types of gates and wire lengths. The synthesized DLs are (1) all digital, i.e., built of conventional standard cells, (2) accurate in tracking variability and (3) configurable at runtime. Experimental results with a commercial standard cell library confirm the quality of the DLs that only exhibit delay mismatches of about 1% on average over all PVT corners.Peer ReviewedPostprint (author's final draft

Channel routing optimization using a genetic algorithm

A modified approach for the application of Genetic Algorithm (GA) to the Channel Routing Problem has been proposed. The code based on the algorithm proposed in [1] has been implemented for the GA procedures of Initial Population Generation, Crossover, Mutation and Selection. A few improvements over the existing work have been made and the results so far obtained have been encouraging. Further experimentation is being done on the algorithm and other ideas generated during the development of the code are being implemented for faster convergence of the algorithm and for generation of more efficient results. Also application of variations of the GA technique like Vector GA and even other computationally intelligent techniques like Particle Swarm Optimization to the channel routing problem is being thought of

Investigation into the wafer-scale integration of fine-grain parallel processing computer systems

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.This thesis investigates the potential of wafer-scale integration (WSI) for the implementation of low-cost fine-grain parallel processing computer systems. As WSI is a relatively new subject, there was little work on which to base investigations. Indeed, most WSI architectures existed only as untried and sometimes vague proposals. Accordingly, the research strategy approached this problem by identifying a representative WSI structure and architecture on which to base investigations. An analysis of architectural proposals identified associative memory to be general purpose parallel processing component used in a wide range of WSI architectures. Furthermore, this analysis provided a set of WSI-level design requirements to evaluate the sustainability of different architectures as research vehicles. The WSI-ASP (WASP) device, which has a large associative memory as its main component is shown to meet these requirements and hence was chosen as the research vehicle. Consequently, this thesis addresses WSI potential through an in-depth investigation into the feasibility of implementing a large associative memory for the WASP device that meets the demanding technological constraints of WSI. Overall, the thesis concludes that WSI offers significant potential for the implementation of low-cost fine-grain parallel processing computer systems. However, due to the dual constraints of thermal management and the area required for the power distribution network, power density is a major design constraint in WSI. Indeed, it is shown that WSI power densities need to be an order of magnitude lower than VLSI power densities. The thesis demonstrates that for associative memories at least, VLSI designs are unsuited to implementation in WSI. Rather, it is shown that WSI circuits must be closely matched to the operational environment to assure suitable power densities. These circuits are significantly larger than their VLSI equivalents. Nonetheless, the thesis demonstrates that by concentrating on the most power intensive circuits, it is possible to achieve acceptable power densities with only a modest increase in area overheads.SER

Doctor of Philosophy

dissertationRecent breakthroughs in silicon photonics technology are enabling the integration of optical devices into silicon-based semiconductor processes. Photonics technology enables high-speed, high-bandwidth, and high-fidelity communications on the chip-scale-an important development in an increasingly communications-oriented semiconductor world. Significant developments in silicon photonic manufacturing and integration are also enabling investigations into applications beyond that of traditional telecom: sensing, filtering, signal processing, quantum technology-and even optical computing. In effect, we are now seeing a convergence of communications and computation, where the traditional roles of optics and microelectronics are becoming blurred. As the applications for opto-electronic integrated circuits (OEICs) are developed, and manufacturing capabilities expand, design support is necessary to fully exploit the potential of this optics technology. Such design support for moving beyond custom-design to automated synthesis and optimization is not well developed. Scalability requires abstractions, which in turn enables and requires the use of optimization algorithms and design methodology flows. Design automation represents an opportunity to take OEIC design to a larger scale, facilitating design-space exploration, and laying the foundation for current and future optical applications-thus fully realizing the potential of this technology. This dissertation proposes design automation for integrated optic system design. Using a buildingblock model for optical devices, we provide an EDA-inspired design flow and methodologies for optical design automation. Underlying these flows and methodologies are new supporting techniques in behavioral and physical synthesis, as well as device-resynthesis techniques for thermal-aware system integration. We also provide modeling for optical devices and determine optimization and constraint parameters that guide the automation techniques. Our techniques and methodologies are then applied to the design and optimization of optical circuits and devices. Experimental results are analyzed to evaluate their efficacy. We conclude with discussions on the contributions and limitations of the approaches in the context of optical design automation, and describe the tremendous opportunities for future research in design automation for integrated optics

The Telecommunications and Data Acquisition Report

Reports on developments in programs managed by JPL's Office of Telecommunications and Data Acquisition are presented. Emphasis is placed on activities of the Deep Space Network and its associated ground facilities

The Telecommunications and Data Acquisition Report

Developments in programs managed by the Jet Propulsion Laboratory's Office of Telecommunications and Data acquisition are discussed. Space communications, radio antennas, the Deep Space Network, antenna design, Project SETI, seismology, coding, very large scale integration, downlinking, and demodulation are among the topics covered

FieldPlacer - A flexible, fast and unconstrained force-directed placement method for heterogeneous reconfigurable logic architectures

The field of placement methods for components of integrated circuits, especially in the domain of reconfigurable chip architectures, is mainly dominated by a handful of concepts. While some of these are easy to apply but difficult to adapt to new situations, others are more flexible but rather complex to realize. This work presents the FieldPlacer framework, a flexible, fast and unconstrained force-directed placement method for heterogeneous reconfigurable logic architectures, in particular for the ever important heterogeneous FPGAs. In contrast to many other force-directed placers, this approach is called ‘unconstrained’ as it does not require a priori fixed logic elements in order to calculate a force equilibrium as the solution to a system of equations. Instead, it is based on a free spring embedder simulation of a graph representation which includes all logic block types of a design simultaneously. The FieldPlacer framework offers a huge amount of flexibility in applying different distance norms (e. g., the Manhattan distance) for the force-directed layout and aims at creating adapted layouts for various objective functions, e. g., highest performance or improved routability. Depending on the individual situation, a runtime-quality trade-off can be considered to either produce a decent placement in a very short time or to generate an exceptionally good placement, which takes longer. An extensive comparison with the latest simulated annealing placement method from the well-known Versatile Place and Route (VPR) framework shows that the FieldPlacer approach can create placements of comparable quality much faster than VPR or, alternatively, generate better placements in the same time. The flexibility in defining arbitrary objective functions and the intuitive adaptability of the method, which, among others, includes different concepts from the field of graph drawing, should facilitate further developments with this framework, e. g., for new upcoming optimization targets like the energy consumption of an implemented design

Secure Physical Design

An integrated circuit is subject to a number of attacks including information leakage, side-channel attacks, fault-injection, malicious change, reverse engineering, and piracy. Majority of these attacks take advantage of physical placement and routing of cells and interconnects. Several measures have already been proposed to deal with security issues of the high level functional design and logic synthesis. However, to ensure end-to-end trustworthy IC design flow, it is necessary to have security sign-off during physical design flow. This paper presents a secure physical design roadmap to enable end-to-end trustworthy IC design flow. The paper also discusses utilization of AI/ML to establish security at the layout level. Major research challenges in obtaining a secure physical design are also discussed