14,105 research outputs found
The Beginnings and Prospective Ending of “End-to-End”: An Evolutionary Perspective On the Internet’s Architecture
The technology of “the Internet” is not static. Although its “end-to- end” architecture has made this “connection-less” communications system readily “extensible,” and highly encouraging to innovation both in hardware and software applications, there are strong pressures for engineering changes. Some of these are wanted to support novel transport services (e.g. voice telephony, real-time video); others would address drawbacks that appeared with opening of the Internet to public and commercial traffic - e.g., the difficulties of blocking delivery of offensive content, suppressing malicious actions (e.g. “denial of service” attacks), pricing bandwidth usage to reduce congestion. The expected gains from making “improvements” in the core of the network should be weighed against the loss of the social and economic benefits that derive from the “end-to-end” architectural design. Even where technological “fixes” can be placed at the networks’ edges, the option remains to search for alternative, institutional mechanisms of governing conduct in cyberspace.
Application of advanced on-board processing concepts to future satellite communications systems: Bibliography
Abstracts are presented of a literature survey of reports concerning the application of signal processing concepts. Approximately 300 references are included
Fronthaul-Constrained Cloud Radio Access Networks: Insights and Challenges
As a promising paradigm for fifth generation (5G) wireless communication
systems, cloud radio access networks (C-RANs) have been shown to reduce both
capital and operating expenditures, as well as to provide high spectral
efficiency (SE) and energy efficiency (EE). The fronthaul in such networks,
defined as the transmission link between a baseband unit (BBU) and a remote
radio head (RRH), requires high capacity, but is often constrained. This
article comprehensively surveys recent advances in fronthaul-constrained
C-RANs, including system architectures and key techniques. In particular, key
techniques for alleviating the impact of constrained fronthaul on SE/EE and
quality of service for users, including compression and quantization,
large-scale coordinated processing and clustering, and resource allocation
optimization, are discussed. Open issues in terms of software-defined
networking, network function virtualization, and partial centralization are
also identified.Comment: 5 Figures, accepted by IEEE Wireless Communications. arXiv admin
note: text overlap with arXiv:1407.3855 by other author
Survey on Data-Centric based Routing Protocols for Wireless Sensor Networks
The great concern for energy that grew with the technological advances in the
field of networks and especially in sensor network has triggered various
approaches and protocols that relate to sensor networks. In this context, the
routing protocols were of great interest. The aim of the present paper is to
discuss routing protocols for sensor networks. This paper will focus mainly on
the discussion of the data-centric approach (COUGAR, rumor, SPIN, flooding and
Gossiping), while shedding light on the other approaches occasionally. The
functions of the nodes will be discussed as well. The methodology selected for
this paper is based on a close description and discussion of the protocol. As a
conclusion, open research questions and limitations are proposed to the reader
at the end of this paper
Latency Bounds of Packet-Based Fronthaul for Cloud-RAN with Functionality Split
The emerging Cloud-RAN architecture within the fifth generation (5G) of
wireless networks plays a vital role in enabling higher flexibility and
granularity. On the other hand, Cloud-RAN architecture introduces an additional
link between the central, cloudified unit and the distributed radio unit,
namely fronthaul (FH). Therefore, the foreseen reliability and latency for 5G
services should also be provisioned over the FH link. In this paper, focusing
on Ethernet as FH, we present a reliable packet-based FH communication and
demonstrate the upper and lower bounds of latency that can be offered. These
bounds yield insights into the trade-off between reliability and latency, and
enable the architecture design through choice of splitting point, focusing on
high layer split between PDCP and RLC and low layer split between MAC and PHY,
under different FH bandwidth and traffic properties. Presented model is then
analyzed both numerically and through simulation, with two classes of 5G
services that are ultra reliable low latency (URLL) and enhanced mobile
broadband (eMBB).Comment: 6 pages, 7 figures, 3 tables, conference paper (ICC19
Unified radio and network control across heterogeneous hardware platforms
Experimentation is an important step in the investigation of techniques for handling spectrum scarcity or the development of new waveforms in future wireless networks. However, it is impractical and not cost effective to construct custom platforms for each future network scenario to be investigated. This problem is addressed by defining Unified Programming Interfaces that allow common access to several platforms for experimentation-based prototyping, research, and development purposes. The design of these interfaces is driven by a diverse set of scenarios that capture the functionality relevant to future network implementations while trying to keep them as generic as possible. Herein, the definition of this set of scenarios is presented as well as the architecture for supporting experimentation-based wireless research over multiple hardware platforms. The proposed architecture for experimentation incorporates both local and global unified interfaces to control any aspect of a wireless system while being completely agnostic to the actual technology incorporated. Control is feasible from the low-level features of individual radios to the entire network stack, including hierarchical control combinations. A testbed to enable the use of the above architecture is utilized that uses a backbone network in order to be able to extract measurements and observe the overall behaviour of the system under test without imposing further communication overhead to the actual experiment. Based on the aforementioned architecture, a system is proposed that is able to support the advancement of intelligent techniques for future networks through experimentation while decoupling promising algorithms and techniques from the capabilities of a specific hardware platform
Electronically-switched Directional Antennas for Low-power Wireless Networks: A Prototype-driven Evaluation
We study the benefits of electronically-switched directional antennas in low-power wireless networks. This antenna technology may improve energy efficiency by increasing the communication range and by alleviating contention in directions other than the destination, but in principle requires a dedicated network stack. Unlike most existing works, we start by characterizing a real-world antenna prototype, and apply this to an existing low-power wireless stack, which we adapt with minimal changes. Our results show that: i) the combination of a low-cost directional antenna and a conventional network stack already brings significant performance improvements, e.g., nearly halving the radio-on time per delivered packet; ii) the margin of improvement available to alternative clean-slate protocol designs is similarly large and concentrated in the control rather than the data plane; iii) by artificially modifying our antenna's link-layer model, we can point at further potential benefits opened by different antenna designs
EVEREST IST - 2002 - 00185 : D23 : final report
Deliverable públic del projecte europeu EVERESTThis deliverable constitutes the final report of the project IST-2002-001858 EVEREST. After its successful completion, the project presents this document that firstly summarizes the context, goal and the approach objective of the project. Then it presents a concise summary of the major goals and results, as well as highlights the most valuable lessons derived form the project work. A list of deliverables and publications is included in the annex.Postprint (published version
Near Optimal Channel Assignment for Interference Mitigation in Wireless Mesh Networks
In multi-radio multi-channel (MRMC) WMNs, interference alleviation is
affected through several network design techniques e.g., channel assignment
(CA), link scheduling, routing etc., intelligent CA schemes being the most
effective tool for interference mitigation. CA in WMNs is an NP-Hard problem,
and makes optimality a desired yet elusive goal in real-time deployments which
are characterized by fast transmission and switching times and minimal
end-to-end latency. The trade-off between optimal performance and minimal
response times is often achieved through CA schemes that employ heuristics to
propose efficient solutions. WMN configuration and physical layout are also
crucial factors which decide network performance, and it has been demonstrated
in numerous research works that rectangular/square grid WMNs outperform random
or unplanned WMN deployments in terms of network capacity, latency, and network
resilience. In this work, we propose a smart heuristic approach to devise a
near-optimal CA algorithm for grid WMNs (NOCAG). We demonstrate the efficacy of
NOCAG by evaluating its performance against the minimal-interference CA
generated through a rudimentary brute-force technique (BFCA), for the same WMN
configuration. We assess its ability to mitigate interference both,
theoretically (through interference estimation metrics) and experimentally (by
running rigorous simulations in NS-3). We demonstrate that the performance of
NOCAG is almost as good as the BFCA, at a minimal computational overhead of
O(n) compared to the exponential of BFCA
- …