Proceedings of the International Workshop on EuroPLOT Persuasive Technology for Learning, Education and Teaching (IWEPLET 2013)

"This book contains the proceedings of the International Workshop on EuroPLOT Persuasive Technology for Learning, Education and Teaching (IWEPLET) 2013 which was held on 16.-17.September 2013 in Paphos (Cyprus) in conjunction with the EC-TEL conference. The workshop and hence the proceedings are divided in two parts: on Day 1 the EuroPLOT project and its results are introduced, with papers about the specific case studies and their evaluation. On Day 2, peer-reviewed papers are presented which address specific topics and issues going beyond the EuroPLOT scope. This workshop is one of the deliverables (D 2.6) of the EuroPLOT project, which has been funded from November 2010 – October 2013 by the Education, Audiovisual and Culture Executive Agency (EACEA) of the European Commission through the Lifelong Learning Programme (LLL) by grant #511633. The purpose of this project was to develop and evaluate Persuasive Learning Objects and Technologies (PLOTS), based on ideas of BJ Fogg. The purpose of this workshop is to summarize the findings obtained during this project and disseminate them to an interested audience. Furthermore, it shall foster discussions about the future of persuasive technology and design in the context of learning, education and teaching. The international community working in this area of research is relatively small. Nevertheless, we have received a number of high-quality submissions which went through a peer-review process before being selected for presentation and publication. We hope that the information found in this book is useful to the reader and that more interest in this novel approach of persuasive design for teaching/education/learning is stimulated. We are very grateful to the organisers of EC-TEL 2013 for allowing to host IWEPLET 2013 within their organisational facilities which helped us a lot in preparing this event. I am also very grateful to everyone in the EuroPLOT team for collaborating so effectively in these three years towards creating excellent outputs, and for being such a nice group with a very positive spirit also beyond work. And finally I would like to thank the EACEA for providing the financial resources for the EuroPLOT project and for being very helpful when needed. This funding made it possible to organise the IWEPLET workshop without charging a fee from the participants.

Explaining multi-threaded task scheduling using tangible user interfaces in higher educational contexts

Endorsing the advantages of computer-based interaction within the educational domain, this study analysis the potential for tangible interactive technology to mitigate the challenges faced by higher educational institutes in explaining abstracted technical concepts. Implemented within a novel within the educational domain, this paper evaluates the efficacy of adopting a tangible user interface (TUI) to aid in the conceptual understanding of multi-threaded task scheduling and programming by undergraduate IT students. Making use of physical object representations, a description is provided for the distinctive development of a collaborative system that allows students to interact with and visualize the scheduling of multiple software threads onto a computer processes. The paper quantitatively studies the usefulness of the proposed TUI system with respect to traditional lectures by deploying the system within a university computing degree. Evaluation analysis of the obtained results highlight a significant improvement in the students' abilities to grasp the abstract and complex notions of multi-threading, thus validating the potential of the proposed study

The aptness of tangible user interfaces for explaining abstract computer network principles

The technological deployment of Tangible User Interfaces (TUI) with their intrinsic ability to interlink the physical and digital domains, have steadily gained interest within the educational sector. As a concrete example of Reality Based Interaction, such digital manipulatives have been successfully implemented in the past years to introduce scientific and engineering concepts at earlier stages throughout the educational cycle. With difference to literature, this research investigates the suitability and effectiveness of implementing a TUI system to enhance the learning experience in a higher education environment. The proposal targets the understanding of advanced computer networking principles by the deployment of an interactive table-top system. Beyond the mere simulation and modelling of networking topologies, the design presents students the ability to directly interact with and visualise the protocol execution, hence augmenting their ability to understand the abstract nature of such algorithms. Following deployment of the proposed innovate prototype within the delivery of a university undergraduate programme, the quantitative effectiveness of this novel methodology will be assessed from both a teaching and learning perspective on its ability to convey the abstract notions of computer network principles

The aptness of tangible user interfaces for explaining abstract computer network principles

The technological deployment of Tangible User Interfaces (TUI) with their intrinsic ability to interlink the physical and digital domains, have steadily gained interest within the educational sector. As a concrete example of Reality Based Interaction, such digital manipulatives have been successfully implemented in the past years to introduce scientific and engineering concepts at earlier stages throughout the educational cycle. With difference to literature, this research investigates the suitability and effectiveness of implementing a TUI system to enhance the learning experience in a higher education environment. The proposal targets the understanding of advanced computer networking principles by the deployment of an interactive table-top system. Beyond the mere simulation and modelling of networking topologies, the design presents students the ability to directly interact with and visualise the protocol execution, hence augmenting their ability to understand the abstract nature of such algorithms. Following deployment of the proposed innovate prototype within the delivery of a university undergraduate programme, the quantitative effectiveness of this novel methodology will be assessed from both a teaching and learning perspective on its ability to convey the abstract notions of computer network principles

Tangible user interfaces : past, present and future directions

In the last two decades, Tangible User Interfaces (TUIs) have emerged as a new interface type that interlinks the digital and physical worlds. Drawing upon users' knowledge and skills of interaction with the real non-digital world, TUIs show a potential to enhance the way in which people interact with and leverage digital information. However, TUI research is still in its infancy and extensive research is required in or- der to fully understand the implications of tangible user interfaces, to develop technologies that further bridge the digital and the physical, and to guide TUI design with empirical knowledge. This paper examines the existing body of work on Tangible User In- terfaces. We start by sketching the history of tangible user interfaces, examining the intellectual origins of this field. We then present TUIs in a broader context, survey application domains, and review frame- works and taxonomies. We also discuss conceptual foundations of TUIs including perspectives from cognitive sciences, phycology, and philoso- phy. Methods and technologies for designing, building, and evaluating TUIs are also addressed. Finally, we discuss the strengths and limita- tions of TUIs and chart directions for future research

D3.1 Instructional Designs for Real-time Feedback

The main objective of METALOGUE is to produce a multimodal dialogue system that is able to implement an interactive behaviour that seems natural to users and is flexible enough to exploit the full potential of multimodal interaction. The METALOGUE system will be arranged in the context of educational use-case scenarios, i.e. for training active citizens (Youth Parliament) and call centre employees. This deliverable describes the intended real-time feedback and reflection in-action support to support the training. Real-time feedback informs learners how they perform key skills and enables them to monitor their progress and thus reflect in-action. This deliverable examines the theoretical considerations of reflection in-action, what type of data is available and should be used, the timing and type of real-time feedback and, finally, concludes with an instructional design blueprint giving a global outline of a set of tasks with stepwise increasing complexity and the feedback proposed.The underlying research project is partly funded by the METALOGUE project. METALOGUE is a Seventh Framework Programme collaborative project funded by the European Commission, grant agreement number: 611073 (http://www.metalogue.eu)

Metaphors, mental models, and multiplicity: Understanding student perception of digital literacy

This study examines student perception of digital literacy from their engagement with the Fabric of Digital Life, a digital archive of emerging technologies. Through grounded theory analysis we identified the ways students make sense of an unfamiliar technology. Our results show students assign metaphors to understand a new digital platform, apply mental models transferred from previous conceptual domains onto new technologies, and express multiply-layered approaches that facilitated their digital literacy development––an indication for instructors to orient toward an expansive description of digital literacy that caters to student learning needs as well as their professional futures

CUBICA: An Example of Mixed Reality

Nowadays, one of the hot issues in the agenda is, undoubtedly, the concept of Sustainable Computing. There are several technologies in the intersection of Sustainable Computing and Ambient Intelligence. Among them we may mention “Human-Centric Interfaces for Ambient Intelligence” and “Collaborative Smart Objects” technologies. In this paper we present our efforts in developing these technologies for “Mixed Reality”, a paradigm where Virtual Reality and Ambient Intelligence meet. Cubica is a mixed reality educational application that integrates virtual worlds with tangible interfaces. The application is focused on teaching computer science, in particular “sorting algorithms”. The tangible interface is used to simplify the abstract concept of array, while the virtual world is used for delivering explanations. This educational application has been tested with students at different educational levels in secondary education, having obtained promising results in terms of increased motivation for learning and better understanding of abstract concepts.We want to thank the faculty of the I.E.S. “Joan Coromines”, at Benicarló (Valencia, Spain), for their support while evaluating the system. In particular, the contribution of Lorenzo Otero was essential during that process. The work described in this paper was partially funded by the Spanish National Plan of I+D+i (TIN2010-17344), and by the Spanish Ministry of Industry (TSI-020100-2010-743)