Energy and Delay Efficient Computation Offloading Solutions for Edge Computing

This thesis collects a selective set of outcomes of a PhD course in Electronics, Telecommunications, and Information Technologies Engineering and it is focused on designing techniques to optimize computational resources in different wireless communication environments. Mobile Edge Computing (MEC) is a novel and distributed computational paradigm that has emerged to address the high users demand in 5G. In MEC, edge devices can share their resources to collaborate in terms of storage and computation. One of the computational sharing techniques is computation offloading, which brings a lot of advantages to the network edge, from lower communication, to lower energy consumption for computation. However, the communication among the devices should be managed such that the resources are exploited efficiently. To this aim, in this dissertation, computation offloading in different wireless environments with different number of users, network traffic, resource availability and devices' location are analyzed in order to optimize the resource allocation at the network edge. To better organize the dissertation, the studies are classified in four main sections. In the first section, an introduction on computational sharing technologies is given. Later, the problem of computation offloading is defined, and the challenges are introduced. In the second section, two partial offloading techniques are proposed. While in the first one, centralized and distributed architectures are proposed, in the second work, an Evolutionary Algorithm for task offloading is proposed. In the third section, the offloading problem is seen from a different perspective where the end users can harvest energy from either renewable sources of energy or through Wireless Power Transfer. In the fourth section, the MEC in vehicular environments is studied. In one work a heuristic is introduced in order to perform the computation offloading in Internet of Vehicles and in the other a learning-based approach based on bandit theory is proposed

Task Allocation among Connected Devices: Requirements, Approaches and Challenges

Task allocation (TA) is essential when deploying application tasks to systems of connected devices with dissimilar and time-varying characteristics. The challenge of an efficient TA is to assign the tasks to the best devices, according to the context and task requirements. The main purpose of this paper is to study the different connotations of the concept of TA efficiency, and the key factors that most impact on it, so that relevant design guidelines can be defined. The paper first analyzes the domains of connected devices where TA has an important role, which brings to this classification: Internet of Things (IoT), Sensor and Actuator Networks (SAN), Multi-Robot Systems (MRS), Mobile Crowdsensing (MCS), and Unmanned Aerial Vehicles (UAV). The paper then demonstrates that the impact of the key factors on the domains actually affects the design choices of the state-of-the-art TA solutions. It results that resource management has most significantly driven the design of TA algorithms in all domains, especially IoT and SAN. The fulfillment of coverage requirements is important for the definition of TA solutions in MCS and UAV. Quality of Information requirements are mostly included in MCS TA strategies, similar to the design of appropriate incentives. The paper also discusses the issues that need to be addressed by future research activities, i.e.: allowing interoperability of platforms in the implementation of TA functionalities; introducing appropriate trust evaluation algorithms; extending the list of tasks performed by objects; designing TA strategies where network service providers have a role in TA functionalities’ provisioning

Energy and performance-optimized scheduling of tasks in distributed cloud and edge computing systems

Infrastructure resources in distributed cloud data centers (CDCs) are shared by heterogeneous applications in a high-performance and cost-effective way. Edge computing has emerged as a new paradigm to provide access to computing capacities in end devices. Yet it suffers from such problems as load imbalance, long scheduling time, and limited power of its edge nodes. Therefore, intelligent task scheduling in CDCs and edge nodes is critically important to construct energy-efficient cloud and edge computing systems. Current approaches cannot smartly minimize the total cost of CDCs, maximize their profit and improve quality of service (QoS) of tasks because of aperiodic arrival and heterogeneity of tasks. This dissertation proposes a class of energy and performance-optimized scheduling algorithms built on top of several intelligent optimization algorithms. This dissertation includes two parts, including background work, i.e., Chapters 3–6, and new contributions, i.e., Chapters 7–11. 1) Background work of this dissertation. Chapter 3 proposes a spatial task scheduling and resource optimization method to minimize the total cost of CDCs where bandwidth prices of Internet service providers, power grid prices, and renewable energy all vary with locations. Chapter 4 presents a geography-aware task scheduling approach by considering spatial variations in CDCs to maximize the profit of their providers by intelligently scheduling tasks. Chapter 5 presents a spatio-temporal task scheduling algorithm to minimize energy cost by scheduling heterogeneous tasks among CDCs while meeting their delay constraints. Chapter 6 gives a temporal scheduling algorithm considering temporal variations of revenue, electricity prices, green energy and prices of public clouds. 2) Contributions of this dissertation. Chapter 7 proposes a multi-objective optimization method for CDCs to maximize their profit, and minimize the average loss possibility of tasks by determining task allocation among Internet service providers, and task service rates of each CDC. A simulated annealing-based bi-objective differential evolution algorithm is proposed to obtain an approximate Pareto optimal set. A knee solution is selected to schedule tasks in a high-profit and high-quality-of-service way. Chapter 8 formulates a bi-objective constrained optimization problem, and designs a novel optimization method to cope with energy cost reduction and QoS improvement. It jointly minimizes both energy cost of CDCs, and average response time of all tasks by intelligently allocating tasks among CDCs and changing task service rate of each CDC. Chapter 9 formulates a constrained bi-objective optimization problem for joint optimization of revenue and energy cost of CDCs. It is solved with an improved multi-objective evolutionary algorithm based on decomposition. It determines a high-quality trade-off between revenue maximization and energy cost minimization by considering CDCs’ spatial differences in energy cost while meeting tasks’ delay constraints. Chapter 10 proposes a simulated annealing-based bees algorithm to find a close-to-optimal solution. Then, a fine-grained spatial task scheduling algorithm is designed to minimize energy cost of CDCs by allocating tasks among multiple green clouds, and specifies running speeds of their servers. Chapter 11 proposes a profit-maximized collaborative computation offloading and resource allocation algorithm to maximize the profit of systems and guarantee that response time limits of tasks are met in cloud-edge computing systems. A single-objective constrained optimization problem is solved by a proposed simulated annealing-based migrating birds optimization. This dissertation evaluates these algorithms, models and software with real-life data and proves that they improve scheduling precision and cost-effectiveness of distributed cloud and edge computing systems

Computing on the Edge of the Network

Um Systeme der fünften Generation zellularer Kommunikationsnetze (5G) zu ermöglichen, sind Energie effiziente Architekturen erforderlich, die eine zuverlässige Serviceplattform für die Bereitstellung von 5G-Diensten und darüber hinaus bieten können. Device Enhanced Edge Computing ist eine Ableitung des Multi-Access Edge Computing (MEC), das Rechen- und Speicherressourcen direkt auf den Endgeräten bereitstellt. Die Bedeutung dieses Konzepts wird durch die steigenden Anforderungen von rechenintensiven Anwendungen mit extrem niedriger Latenzzeit belegt, die den MEC-Server allein und den drahtlosen Kanal überfordern. Diese Dissertation stellt ein Berechnungs-Auslagerungsframework mit Berücksichtigung von Energie, Mobilität und Anreizen in einem gerätegestützten MEC-System mit mehreren Benutzern und mehreren Aufgaben vor, das die gegenseitige Abhängigkeit der Aufgaben sowie die Latenzanforderungen der Anwendungen berücksichtigt.To enable fifth generation cellular communication network (5G) systems, energy efficient architectures are required that can provide a reliable service platform for the delivery of 5G services and beyond. Device Enhanced Edge Computing is a derivative of Multi-Access Edge Computing (MEC), which provides computing and storage resources directly on the end devices. The importance of this concept is evidenced by the increasing demands of ultra-low latency computationally intensive applications that overwhelm the MEC server alone and the wireless channel. This dissertation presents a computational offloading framework considering energy, mobility and incentives in a multi-user, multi-task device-based MEC system that takes into account task interdependence and application latency requirements

Joint Deployment and Task Scheduling Optimization for Large-Scale Mobile Users in Multi-UAV Enabled Mobile Edge Computing

This article establishes a new multiunmanned aerial vehicle (multi-UAV)-enabled mobile edge computing (MEC) system, where a number of unmanned aerial vehicles (UAVs) are deployed as flying edge clouds for large-scale mobile users. In this system, we need to optimize the deployment of UAVs, by considering their number and locations. At the same time, to provide good services for all mobile users, it is necessary to optimize task scheduling. Specifically, for each mobile user, we need to determine whether its task is executed locally or on a UAV (i.e., offloading decision), and how many resources should be allocated (i.e., resource allocation). This article presents a two-layer optimization method for jointly optimizing the deployment of UAVs and task scheduling, with the aim of minimizing system energy consumption. By analyzing this system, we obtain the following property: the number of UAVs should be as small as possible under the condition that all tasks can be completed. Based on this property, in the upper layer, we propose a differential evolution algorithm with an elimination operator to optimize the deployment of UAVs, in which each individual represents a UAV's location and the entire population represents an entire deployment of UAVs. During the evolution, we first determine the maximum number of UAVs. Subsequently, the elimination operator gradually reduces the number of UAVs until at least one task cannot be executed under delay constraints. This process achieves an adaptive adjustment of the number of UAVs. In the lower layer, based on the given deployment of UAVs, we transform the task scheduling into a 0-1 integer programming problem. Due to the large-scale characteristic of this 0-1 integer programming problem, we propose an efficient greedy algorithm to obtain the near-optimal solution with much less time. The effectiveness of the proposed two-layer optimization method and the established multi-UAV-enabled MEC system is demonstrated on ten instances with up to 1000 mobile users

Unleashing the Power of Edge-Cloud Generative AI in Mobile Networks: A Survey of AIGC Services

Artificial Intelligence-Generated Content (AIGC) is an automated method for generating, manipulating, and modifying valuable and diverse data using AI algorithms creatively. This survey paper focuses on the deployment of AIGC applications, e.g., ChatGPT and Dall-E, at mobile edge networks, namely mobile AIGC networks, that provide personalized and customized AIGC services in real time while maintaining user privacy. We begin by introducing the background and fundamentals of generative models and the lifecycle of AIGC services at mobile AIGC networks, which includes data collection, training, finetuning, inference, and product management. We then discuss the collaborative cloud-edge-mobile infrastructure and technologies required to support AIGC services and enable users to access AIGC at mobile edge networks. Furthermore, we explore AIGCdriven creative applications and use cases for mobile AIGC networks. Additionally, we discuss the implementation, security, and privacy challenges of deploying mobile AIGC networks. Finally, we highlight some future research directions and open issues for the full realization of mobile AIGC networks

Reconfigurable Intelligent Surface Assisted MEC Offloading in NOMA-Enabled IoT Networks

Integrating mobile edge computing (MEC) into the Internet of Things (IoT) enables resource-limited mobile terminals to offload part or all of the computation-intensive applications to nearby edge servers. On the other hand, by introducing reconfigurable intelligent surface (RIS), it can enhance the offloading capability of MEC, such that enabling low latency and high throughput. To enhance the task offloading, we investigate the MEC non-orthogonal multiple access (MEC-NOMA) network framework for mobile edge computation offloading with the assistance of a RIS. Different from conventional communication systems, we aim at allowing multiple IoT devices to share the same channel in tasks offloading process. Specifically, the joint consideration of channel assignments, beamwidth allocation, offloading rate and power control is formulated as a multi-objective optimization problem (MOP), which includes minimizing the offloading delay of computing-oriented IoT devices (CP-IDs) and maximizing the transmission rate of communication-oriented IoT devices (CM-IDs). Since the resulting problem is non-convex, we employ ϵ-constraint approach to transform the MOP into the single-objective optimization problems (SOP), and then the RIS-assisted channel assignment algorithm is developed to tackle the fractional objective function. Simulation results corroborate the benefits of our strategy, which can outperforms the other benchmark schemes

Horizontally distributed inference of deep neural networks for AI-enabled IoT

Motivated by the pervasiveness of artificial intelligence (AI) and the Internet of Things (IoT) in the current “smart everything” scenario, this article provides a comprehensive overview of the most recent research at the intersection of both domains, focusing on the design and development of specific mechanisms for enabling a collaborative inference across edge devices towards the in situ execution of highly complex state-of-the-art deep neural networks (DNNs), despite the resource-constrained nature of such infrastructures. In particular, the review discusses the most salient approaches conceived along those lines, elaborating on the specificities of the partitioning schemes and the parallelism paradigms explored, providing an organized and schematic discussion of the underlying workflows and associated communication patterns, as well as the architectural aspects of the DNNs that have driven the design of such techniques, while also highlighting both the primary challenges encountered at the design and operational levels and the specific adjustments or enhancements explored in response to them.Agencia Estatal de Investigación | Ref. DPI2017-87494-RMinisterio de Ciencia e Innovación | Ref. PDC2021-121644-I00Xunta de Galicia | Ref. ED431C 2022/03-GR