363 research outputs found
A Survey of Positioning Systems Using Visible LED Lights
© 2018 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.As Global Positioning System (GPS) cannot provide satisfying performance in indoor environments, indoor positioning technology, which utilizes indoor wireless signals instead of GPS signals, has grown rapidly in recent years. Meanwhile, visible light communication (VLC) using light devices such as light emitting diodes (LEDs) has been deemed to be a promising candidate in the heterogeneous wireless networks that may collaborate with radio frequencies (RF) wireless networks. In particular, light-fidelity has a great potential for deployment in future indoor environments because of its high throughput and security advantages. This paper provides a comprehensive study of a novel positioning technology based on visible white LED lights, which has attracted much attention from both academia and industry. The essential characteristics and principles of this system are deeply discussed, and relevant positioning algorithms and designs are classified and elaborated. This paper undertakes a thorough investigation into current LED-based indoor positioning systems and compares their performance through many aspects, such as test environment, accuracy, and cost. It presents indoor hybrid positioning systems among VLC and other systems (e.g., inertial sensors and RF systems). We also review and classify outdoor VLC positioning applications for the first time. Finally, this paper surveys major advances as well as open issues, challenges, and future research directions in VLC positioning systems.Peer reviewe
Efficient AoA-based wireless indoor localization for hospital outpatients using mobile devices
The motivation of this work is to help outpatients find their corresponding departments or clinics, thus, it needs to provide indoor positioning services with a room-level accuracy. Unlike wireless outdoor localization that is dominated by the global positioning system (GPS), wireless indoor localization is still an open issue. Many different schemes are being developed to meet the increasing demand for indoor localization services. In this paper, we investigated the AoA-based wireless indoor localization for outpatientsâ wayfinding in a hospital, where Wi-Fi access points (APs) are deployed, in line, on the ceiling. The target position can be determined by a mobile device, like a smartphone, through an efficient geometric calculation with two known APs coordinates and the angles of the incident radios. All possible positions in which the target may appear have been comprehensively investigated, and the corresponding solutions were proven to be the same. Experimental results show that localization error was less than 2.5 m, about 80% of the time, which can satisfy the outpatientsâ requirements for wayfinding
Target Localization and Tracking in Wireless Sensor Networks
This thesis addresses the target localization problem in wireless sensor networks (WSNs) by employing statistical modeling and convex relaxation techniques. The first and the second part of the thesis focus on received signal strength (RSS)- and RSS-angle of arrival (AoA)-based target localization problem, respectively. Both non-cooperative and cooperative WSNs are investigated and various settings of the localization problem are of interest (e.g. known and unknown target transmit power, perfectly and imperfectly known path loss exponent). For all cases, maximum likelihood (ML) estimation problem is first formulated.
The general idea is to tightly approximate the ML estimator by another one whose
global solution is a close representation of the ML solution, but is easily obtained due to greater smoothness of the derived objective function. By applying certain relaxations, the solution to the derived estimator is readily obtained through general-purpose solvers. Both centralized (assumes existence of a central node that collects all measurements and carries out all necessary processing for network mapping) and distributed (each target determines its own location by iteratively solving a local representation of the derived estimator) algorithms are described. More specifically, in the case of centralized RSS-based localization, second-order cone programming (SOCP) and semidefinite programming (SDP) estimators are derived by applying SOCP and SDP relaxation techniques in non-cooperative and cooperative WSNs, respectively. It is also shown that the derived SOCP estimator can be extended for distributed implementation in cooperative WSNs. In the second part of the thesis, derivation procedure of a weighted least squares (WLS) estimator by converting the centralized non-cooperative RSS-AoA localization problem into a generalized trust region
sub-problem (GTRS) framework, and an SDP estimator by applying SDP relaxations to
the centralized cooperative RSS-AoA localization problem are described. Furthermore, a distributed SOCP estimator is developed, and an extension of the centralized WLS estimator for non-cooperative WSNs to distributed conduction in cooperative WSNs is also presented. The third part of the thesis is committed to RSS-AoA-based target tracking problem. Both cases of target tracking with fixed/static anchors and mobile sensors are investigated. First, the non-linear measurement model is linearized by applying Cartesian to polar coordinates conversion. Prior information extracted from target transition model is then added to the derived model, and by following maximum a posteriori (MAP) criterion, a MAP algorithm is developed. Similarly, by taking advantage of the derived model and the prior knowledge, Kalman filter (KF) algorithm is designed. Moreover, by allowing sensor mobility, a simple navigation routine for sensorsâ movement management is described, which significantly enhances the estimation accuracy of the presented algorithms even for a reduced number of sensors.
The described algorithms are assessed and validated through simulation results and
real indoor measurements
Infrastructure Wi-Fi for connected autonomous vehicle positioning : a review of the state-of-the-art
In order to realize intelligent vehicular transport networks and self driving cars, connected autonomous vehicles (CAVs) are required to be able to estimate their position to the nearest centimeter. Traditional positioning in CAVs is realized by using a global navigation satellite system (GNSS) such as global positioning system (GPS) or by fusing weighted location parameters from a GNSS with an inertial navigation systems (INSs). In urban environments where Wi-Fi coverage is ubiquitous and GNSS signals experience signal blockage, multipath or non line-of-sight (NLOS) propagation, enterprise or carrier-grade Wi-Fi networks can be opportunistically used for localization or âfusedâ with GNSS to improve the localization accuracy and precision. While GNSS-free localization systems are in the literature, a survey of vehicle localization from the perspective of a Wi-Fi anchor/infrastructure is limited. Consequently, this review seeks to investigate recent technological advances relating to positioning techniques between an ego vehicle and a vehicular network infrastructure. Also discussed in this paper is an analysis of the location accuracy, complexity and applicability of surveyed literature with respect to intelligent transportation system requirements for CAVs. It is envisaged that hybrid vehicular localization systems will enable pervasive localization services for CAVs as they travel through urban canyons, dense foliage or multi-story car parks
Location-Enabled IoT (LE-IoT): A Survey of Positioning Techniques, Error Sources, and Mitigation
The Internet of Things (IoT) has started to empower the future of many
industrial and mass-market applications. Localization techniques are becoming
key to add location context to IoT data without human perception and
intervention. Meanwhile, the newly-emerged Low-Power Wide-Area Network (LPWAN)
technologies have advantages such as long-range, low power consumption, low
cost, massive connections, and the capability for communication in both indoor
and outdoor areas. These features make LPWAN signals strong candidates for
mass-market localization applications. However, there are various error sources
that have limited localization performance by using such IoT signals. This
paper reviews the IoT localization system through the following sequence: IoT
localization system review -- localization data sources -- localization
algorithms -- localization error sources and mitigation -- localization
performance evaluation. Compared to the related surveys, this paper has a more
comprehensive and state-of-the-art review on IoT localization methods, an
original review on IoT localization error sources and mitigation, an original
review on IoT localization performance evaluation, and a more comprehensive
review of IoT localization applications, opportunities, and challenges. Thus,
this survey provides comprehensive guidance for peers who are interested in
enabling localization ability in the existing IoT systems, using IoT systems
for localization, or integrating IoT signals with the existing localization
sensors
Collaborative Indoor Positioning Systems: A Systematic Review
Research and development in Collaborative Indoor Positioning Systems (CIPSs) is growing
steadily due to their potential to improve on the performance of their non-collaborative counterparts.
In contrast to the outdoors scenario, where Global Navigation Satellite System is widely adopted, in
(collaborative) indoor positioning systems a large variety of technologies, techniques, and methods is
being used. Moreover, the diversity of evaluation procedures and scenarios hinders a direct comparison. This paper presents a systematic review that gives a general view of the current CIPSs. A total of
84 works, published between 2006 and 2020, have been identified. These articles were analyzed and
classified according to the described systemâs architecture, infrastructure, technologies, techniques,
methods, and evaluation. The results indicate a growing interest in collaborative positioning, and
the trend tend to be towards the use of distributed architectures and infrastructure-less systems.
Moreover, the most used technologies to determine the collaborative positioning between users are
wireless communication technologies (Wi-Fi, Ultra-WideBand, and Bluetooth). The predominant collaborative positioning techniques are Received Signal Strength Indication, Fingerprinting, and Time
of Arrival/Flight, and the collaborative methods are particle filters, Belief Propagation, Extended
Kalman Filter, and Least Squares. Simulations are used as the main evaluation procedure. On the
basis of the analysis and results, several promising future research avenues and gaps in research
were identified
A two phase framework for visible light-based positioning in an indoor environment: performance, latency, and illumination
Recently with the advancement of solid state lighting and the application thereof
to Visible Light Communications (VLC), the concept of Visible Light Positioning
(VLP) has been targeted as a very attractive indoor positioning system (IPS) due to
its ubiquity, directionality, spatial reuse, and relatively high modulation bandwidth.
IPSs, in general, have 4 major components (1) a modulation, (2) a multiple access
scheme, (3) a channel measurement, and (4) a positioning algorithm. A number of
VLP approaches have been proposed in the literature and primarily focus on a fixed
combination of these elements and moreover evaluate the quality of the contribution
often by accuracy or precision alone.
In this dissertation, we provide a novel two-phase indoor positioning algorithmic
framework that is able to increase robustness when subject to insufficient anchor luminaries
and also incorporate any combination of the four major IPS components.
The first phase provides robust and timely albeit less accurate positioning proximity
estimates without requiring more than a single luminary anchor using time division
access to On Off Keying (OOK) modulated signals while the second phase provides a
more accurate, conventional, positioning estimate approach using a novel geometric
constrained triangulation algorithm based on angle of arrival (AoA) measurements.
However, this approach is still an application of a specific combination of IPS components.
To achieve a broader impact, the framework is employed on a collection
of IPS component combinations ranging from (1) pulsed modulations to multicarrier
modulations, (2) time, frequency, and code division multiple access, (3) received signal
strength (RSS), time of flight (ToF), and AoA, as well as (4) trilateration and
triangulation positioning algorithms.
Results illustrate full room positioning coverage ranging with median accuracies
ranging from 3.09 cm to 12.07 cm at 50% duty cycle illumination levels. The framework
further allows for duty cycle variation to include dimming modulations and results
range from 3.62 cm to 13.15 cm at 20% duty cycle while 2.06 cm to 8.44 cm at a
78% duty cycle. Testbed results reinforce this frameworks applicability. Lastly, a
novel latency constrained optimization algorithm can be overlaid on the two phase
framework to decide when to simply use the coarse estimate or when to expend more
computational resources on a potentially more accurate fine estimate.
The creation of the two phase framework enables robust, illumination, latency
sensitive positioning with the ability to be applied within a vast array of system
deployment constraints
- âŠ