944 research outputs found
Optic-Fiber Temperature Sensor
As an important parameter in industry, agriculture, biomedical, and aerospace, temperature possesses a significant position for the development of our society. Thus, it has become a hot point to develop novel sensors for temperature monitoring. Compared with traditional electronic sensors, optical fiber sensors break out for the compact structure, corrosion resistance, multiplex and remote sensing capability, cheap prices, and large transmission capacity. Especially the phase modulation type optical fiber sensors attract much attention for the fast and accurate measurement of the external parameters in a large dynamic measurement range. In this work, we review the optical fiber Mach-Zehnder interferometer (MZI) for temperature sensing which is widely used these years. The fundamental principles of MZI fiber sensors are proposed and discussed to further understand MZI. Different kind of structures for temperature sensing of recent years are summarized as several typical MZI categories and their advantages and disadvantages are indicated separately. Finally, we make a conclusion of the MZI temperature sensing and several methods typically to realize the MZI in practical application for the readers
Intensity-modulated abrupt tapered Fiber Mach-Zehnder Interferometer for the simultaneous sensing of temperature and curvature
AbstractAn abrupt tapered fiber In-Line Mach-Zehnder Interferometer sensor for simultaneous measurement of temperature and curvature is proposed and experimentally demonstrated. The sensor head is fabricated by arcing Corning SMF-28 using a commercial arc fusion splicer. The individual parameters discrimination was achieved by manipulating the unequal sensitivities of optical power to temperature and curvature obtained at two wavelengths within the sensing spectrum. The curvature and temperature sensitivities at λ1 (1537nm) and λ2 (1568.7nm) were found to be 11.8264dBm/m−1, 12.4885dBm/m−1 and 0.0829dBm/°C, 0.0833dBm/°C, respectively. The experimental results show unperturbed readings with rms deviation of ±0.1801m−1 and ±0.0826°C, for curvature and temperature measurements, respectively, through measurement of optical power response of the sensor. With this simultaneous sensing technique, the proposed sensor can be deployed for many field applications such as nondestructive structural health monitoring of civil infrastructure
Recommended from our members
High sensitivity micro-fiber Mach-Zehnder interferometric temperature sensors with a high index ring layer
The influence of the high index ring layer (HIRL) in a tapered fiber Mach-Zehnder interferometer (MZI) on the interference observed, and thus on its potential applications in temperature sensing, has been investigated. The MZI was comprised of a tapered Ring Core Fiber (RCF), spliced between two single mode fibers (SMF). Since part of core mode from the SMF was converted into cladding modes in the RCF, due to the mismatch in the cores between the RCF and SMF, the residual power enters and then propagates along the center of the RCF (silica). The difference in phase between the radiation travelling along these different paths is separated by the HIRL to generate an interference effect. Compared with fiber interferometers based on core and cladding mode interference, the thin fiber HIRL is capable of separating the high order cladding modes and the silica core mode, under grazing incident conditions. Therefore, the optical path difference (OPD) and the sensitivity are both substantially improved over what is seen in conventional devices, showing their potential for interferometric temperature sensor applications. The optimum temperature sensitivity obtained was 186.6 pm/°C, which is ∼ 11.7 times higher than has been reported previously
Tapered optical fibre sensors: current trends and future perspectives
The development of reliable, affordable and efficient sensors is a key step in providing tools for efficient monitoring of critical environmental parameters. This review focuses on the use of tapered optical fibres as an environmental sensing platform. Tapered fibres allow access to the evanescent wave of the propagating mode, which can be exploited to facilitate chemical sensing by spectroscopic evaluation of the medium surrounding the optical fibre, by measurement of the refractive index of the medium, or by coupling to other waveguides formed of chemically sensitive materials. In addition, the reduced diameter of the tapered section of the optical fibre can offer benefits when measuring physical parameters such as strain and temperature. A review of the basic sensing platforms implemented using tapered optical fibres and their application for development of fibre-optic physical, chemical and bio-sensors is presented
Novel Microfiber Sensor and Its Biosensing Application for Detection of hCG Based on a Singlemode-Tapered Hollow Core-Singlemode Fiber Structure
A novel microfiber sensor is proposed and demonstrated based on a singlemode-tapered hollow core -singlemode (STHS) fiber structure. Experimentally a STHS with taper waist diameter of 26.5 μm has been fabricated and RI sensitivity of 816, 1601.86, and 4775.5 nm/RIU has been achieved with RI ranges from 1.3335 to 1.3395 , from 1.369 to 1.378, and from 1.409 to 1.4175 respectively, which agrees very well with simulated RI sensitivity of 885, 1517, and 4540 nm/RIU at RI ranges from 1.3335 to 1.337, from 1.37 to 1.374, and from 1.41 to 1.414 . The taper waist diameter has impact on both temperature and strain sensitivity of the sensor structure: (1) the smaller the waist diameter, the higher the temperature sensitivity, and experimentally 26.82 pm/°C has been achieved with a taper waist diameter of 21.4 μm; (2) as waist diameter decrease, strain sensitivity increase and 7.62 pm/με has been achieved with a taper diameter of 20.3 μm. The developed sensor was then functionalized for human chorionic gonadotropin (hCG) detection as an example for biosensing application. Experimentally for hCG concentration of 5 mIU/ml, the sensor has 0.5 nm wavelength shift, equivalent to limit of detection (LOD) of 0.6 mIU/ml by defining 3 times of the wavelength variation (0.06 nm) as measurement limit. The biosensor demonstrated relatively good reproducibility and specificity, which has potential for real medical diagnostics and other applications
Optofluidic Micromachined Platform for Refractive Index Measurement
We present a combination of micromachined optofluidic platforms equipped with a fiber-optic sensing configuration based on a three-path Mach–Zehnder interferometer (MZI) for simultaneous measurement of the refractive index of liquids and the autocalibration in dynamic regime. The sensing principle is based on the low-coherence interferometry, characterized by a generation of Gaussian enveloped interferograms, for which the position of its maximum depends on the optical path difference (OPD) between the sensing and reference arm of the MZI. When liquid flows through the central microchannel of the optofluidic platform it crosses the light beam between the two optical fibers in the sensing arm causing the OPD change. An algorithm has been applied for the calculation of the refractive index of liquids out of the raw interference signals. We obtained a very good agreement between the experimental results and literature data of refractive indices of subjected fluids. The accuracy of refractive index measurement is approximately 1%, predominantly determined by the accuracy of reading the position of the mechanical scanner. The proposed sensor is attractive for the label-free biological, biochemical, and chemical sensing owing autocalibration and high sensitivity yet consuming a very small sample volume of 1 µL. It is capable to measure the refractive index of various liquids and/or gases simultaneously in the process
Hollow-Core Photonic Crystal Fiber Mach–Zehnder Interferometer for Gas Sensing
A novel and compact interferometric refractive index (RI) point sensor is developed using hollow-core photonic crystal fiber (HC-PCF) and experimentally demonstrated for high sensitivity detection and measurement of pure gases. To construct the device, the sensing element fiber (HC-PCF) was placed between two single-mode fibers with airgaps at each side. Great measurement repeatability was shown in the cyclic test for the detection of various gases. The RI sensitivity of 4629 nm/RIU was demonstrated in the RI range of 1.0000347–1.000436 for the sensor with an HC-PCF length of 3.3 mm. The sensitivity of the proposed Mach–Zehnder interferometer (MZI) sensor increases when the length of the sensing element decreases. It is shown that response and recovery times of the proposed sensor inversely change with the length of HC-PCF. Besides, spatial frequency analysis for a wide range of air-gaps revealed information on the number and power distribution of modes. It is shown that the power is mainly carried by two dominant modes in the proposed structure. The proposed sensors have the potential to improve current technology’s ability to detect and quantify pure gases
Highly sensitive fiber-optic temperature sensor based on tapered no-core fiber for biomedical and biomechanical applications
A low-cost, easy to fabricate real-time temperature sensation device built on an In-Line Mach–Zehnder interferometer basis was manufactured by fusing a segment of no-core fiber amongst two fibers of single-mode. Two different structures, tapered no-core fiber, and untapered no-core fiber both retaining acrylate polymer coating were investigated. The 3 cm length tapered no-core fiber sensor showed the highest sensitivities of ∼ −1.943 nm ◦C−1 and ∼ −1.954 nm ◦C−1 for two different dips respectively. The sensor exhibited high linearity with a very good resolution of 0.0102 ◦C. making the most of the high coefficient of thermal expansion, thermo-optic properties of the acrylate polymer, and the tapering effect, the sensor could be utilized in many temperatures observing applications like biochemical labs, biomechanical studies, and bio-sensing analyses
Interferometric Fiber Optic Sensors
Fiber optic interferometers to sense various physical parameters including temperature, strain, pressure, and refractive index have been widely investigated. They can be categorized into four types: Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac. In this paper, each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields. Some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications. Some of the simple to fabricate but exceedingly effective Fabry-Perot interferometers, implemented in both extrinsic and intrinsic structures, are discussed. Also, a wide variety of Mach-Zehnder and Michelson interferometric sensors based on photonic crystal fibers are introduced along with their remarkable sensing performances. Finally, the simultaneous multi-parameter sensing capability of a pair of long period fiber grating (LPG) is presented in two types of structures; one is the Mach-Zehnder interferometer formed in a double cladding fiber and the other is the highly sensitive Sagnac interferometer cascaded with an LPG pair
- …