TCP Using Adaptive FEC to Improve Throughput Performance in High-Latency Environments

Packet losses significantly degrade TCP performance in high-latency environments. This is because TCP needs at least one round-trip time (RTT) to recover lost packets. The recovery time will grow longer, especially in high-latency environments. TCP keeps transmission rate low while lost packets are recovered, thereby degrading throughput. To prevent this performance degradation, the number of retransmissions must be kept as low as possible. Therefore, we propose a scheme to apply a technology called “forward error correction” (FEC) to the entire TCP operation in order to improve throughput. Since simply applying FEC might not work effectively, three function, namely, controlling redundancy level and transmission rate, suppressing the return of duplicate ACKs, interleaving redundant packets, were devised. The effectiveness of the proposed scheme was demonstrated by simulation evaluations in high-latency environments

Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks

Tesis por compendioProducts related with Intelligent Transportation Systems (ITS) are becoming a reality on our roads. All car manufacturers are starting to include Internet access in their vehicles and to integrate smartphones directly from the dashboard, but more and more services will be introduced in the near future. Connectivity through "vehicular networks" will become a cornerstone of every new proposal, and offering an adequate quality of service is obviously desirable. However, a lot of work is needed for vehicular networks to offer performances similar to those of the wired networks. Vehicular networks can be characterized by two main features: high variability due to mobility levels that can reach up to 250 kilometers per hour, and heterogeneity, being that various competing versions from different vendors have and will be released. Therefore, to make the deployment of efficient services possible, an extensive study must be carried out and adequate tools must be proposed and developed. This PhD thesis addresses the service deployment problem in these networks at three different levels: (i) the physical and link layer, showing an exhaustive analysis of the physical channel and models; (ii) the network layer, proposing a forwarding protocol for IP packets; and (iii) the transport layer, where protocols are proposed to improve data delivery. First of all, the two main wireless technologies used in vehicular networks where studied and modeled, namely the 802.11 family of standards, particularly 802.11p, and the cellular networks focusing on LTE. Since 802.11p is a quite mature standard, we defined (i) a propagation and attenuation model capable of replicating the transmission range and the fading behavior of real 802.11p devices, both in line-of-sight conditions and when obstructed by small obstacles, and (ii) a visibility model able to deal with large obstacles, such as buildings and houses, in a realistic manner. Additionally, we proposed a model based on high-level performance indicators (bandwidth and delay) for LTE, which makes application validation and evaluation easier. At the network layer, a hybrid protocol called AVE is proposed for packet forwarding by switching among a set of standard routing strategies. Depending on the specific scenario, AVE selects one out of four different routing solutions: a) two-hop direct delivery, b) Dynamic MANET On-demand (DYMO), c) greedy georouting, and d) store-carry-and-forward technique, to dynamically adapt its behavior to the specific situation. At the transport layer, we proposed a content delivery protocol for reliable and bidirectional unicast communication in lossy links that improves content delivery in situations where the wireless network is the bottleneck. It has been designed, validated, optimized, and its performance has been analyzed in terms of throughput and resource efficiency. Finally, at system level, we propose an edge-assisted computing model that allows reducing the response latency of several queries by placing a computing unit at the network edge. This way, traffic traversal through the Internet is avoided when not needed. This scheme could be used in both 802.11p and cellular networks, and in this thesis we decided to focus on its evaluation using LTE networks. The platform presented in this thesis combines all the individual efforts to create a single efficient platform. This new environment could be used by any provider to improve the quality of the user experience obtainable through the proposed vehicular network-based services.Los productos relacionados con los Sistemas Inteligentes de Transporte (ITS) se están transformando en una realidad en nuestras carreteras. Todos los fabricantes de coches comienzan a incluir acceso a internet en sus vehículos y a facilitar su integración con los teléfonos móviles, pero más y más servicios se introducirán en el futuro. La conectividad usando las "redes vehiculares" se convertirá en la piedra angular de cada nueva propuesta, y ofrecer una calidad de servicio adecuada será, obviamente, deseable. Sin embargo, se necesita una gran cantidad de trabajo para que las redes vehiculares ofrezcan un rendimiento similar al de las redes cableadas. Las redes vehiculares quedan definidas por sus dos características básicas: alto dinamismo, pues los nodos pueden alcanzar una velocidad relativa de más de 250 km/h; y heterogeneidad, por la gran cantidad de propuestas diferentes que los fabricantes están lanzando al mercado. Por ello, para hacer posible el despliegue de servicios sobre ellas, se impone la necesidad de hacer un estudio en profundidad de este entorno, y deben de proponerse y desarrollarse las herramientas adecuadas. Esta tesis ataca la problemática del despliegue de servicios en estas redes a tres niveles diferentes: (i) el nivel físico y de enlace, mostrando varios análisis en profundidad del medio físico y modelos derivados para su simulación; (ii) el nivel de red, proponiendo un protocolo de difusión de la información para los paquetes IP; y (iii) el nivel de transporte, donde otros protocolos son propuestos para mejorar el rendimiento del transporte de datos. En primer lugar, se han estudiado y modelado las dos principales tecnologías inalámbricas que se utilizan para la comunicación en redes vehiculares, la rama de estándares 802.11, en concreto 802.11p; y la comunicación celular, en particular LTE. Dado que el estándar 802.11p es un estándar bastante maduro, nos centramos en crear (i) un modelo de propagación y atenuación capaz de replicar el rango de transmisión de dispositivos 802.11p reales, en condiciones de visión directa y obstrucción por pequeños obstáculos, y (ii) un modelo de visibilidad capaz de simular el efecto de grandes obstáculos, como son los edifcios, de una manera realista. Además, proponemos un modelo basado en indicadores de rendimiento de alto nivel (ancho de banda y retardo) para LTE, que facilita la validación y evaluación de aplicaciones. En el plano de red, se propone un protocolo híbrido, llamado AVE, para el encaminamiento y reenvío de paquetes usando un conjunto de estrategias estándar de enrutamiento. Dependiendo del escenario, AVE elige entre cuatro estrategias diferentes: a) entrega directa a dos saltos, b) Dynamic MANET On-demand (DYMO) c) georouting voraz, y d) una técnica store-carry-and- forward, para adaptar su comportamiento dinámicamente a cada situación. En el plano de transporte, se propone un protocolo bidireccional de distribución de contenidos en canales con pérdidas que mejora la entrega de contenidos en situaciones en las que la red es un cuello de botella, como las redes inalámbricas. Ha sido diseñado, validado, optimizado, y su rendimiento ha sido analizado en términos de productividad y eficiencia en la utilización de recursos. Finalmente, a nivel de sistema, proponemos un modelo de computación asistida que permite reducir la latencia en la respuesta a muchas consultas colocando una unidad de computación en el borde de la red, i.e., la red de acceso. Este esquema podría ser usado en redes basadas en 802.11p y en redes celulares, si bien en esta tesis decidimos centrarnos en su evaluación usando redes LTE. La plataforma presentada en esta tesis combina todos los esfuerzos individuales para crear una plataforma única y eficiente. Este nuevo entorno puede ser usado por cualquier proveedor para mejorar la calidad de la experiencia de usuario en los servicios desplegados sobre redes vehiculares.Els productes relacionats amb els sistemes intel · ligents de transport (ITS) s'estan transformant en una realitat en les nostres carreteres. Tots els fabri- cants de cotxes comencen a incloure accés a internet en els vehicles i a facilitar- ne la integració amb els telèfons mòbils, però en el futur més i més serveis s'hi introduiran. La connectivitat usant les xarxes vehicular esdevindrà la pedra angular de cada nova proposta, i oferir una qualitat de servei adequada serà, òbviament, desitjable. No obstant això, es necessita una gran quantitat de treball perquè les xarxes vehiculars oferisquen un rendiment similar al de les xarxes cablejades. Les xarxes vehiculars queden definides per dues característiques bàsiques: alt dinamisme, ja que els nodes poden arribar a una velocitat relativa de més de 250 km/h; i heterogeneïtat, per la gran quantitat de propostes diferents que els fabricants estan llançant al mercat. Per això, per a fer possible el desplegament de serveis sobre aquestes xarxes, s'imposa la necessitat de fer un estudi en profunditat d'aquest entorn, i cal proposar i desenvolupar les eines adequades. Aquesta tesi ataca la problemàtica del desplegament de serveis en aquestes xarxes a tres nivells diferents: (i) el nivell físic i d'enllaç , mostrant diverses anàlisis en profunditat del medi físic i models derivats per simular-lo; (ii) el nivell de xarxa, proposant un protocol de difusió de la informació per als paquets IP; i (iii) el nivell de transport, on es proposen altres protocols per a millorar el rendiment del transport de dades. En primer lloc, s'han estudiat i modelat les dues principals tecnologies sense fils que s'utilitzen per a la comunicació en xarxes vehiculars, la branca d'estàndards 802.11, en concret 802.11p; i la comunicació cel · lular, en partic- ular LTE. Atès que l'estàndard 802.11p és un estàndard bastant madur, ens centrem a crear (i) un model de propagació i atenuació capaç de replicar el rang de transmissió de dispositius 802.11p reals, en condicions de visió directa i obstrucció per petits obstacles, i (ii) un model de visibilitat capaç de simular l'efecte de grans obstacles, com són els edificis, d'una manera realista. A més, proposem un model basat en indicadors de rendiment d'alt nivell (ample de banda i retard) per a LTE, que facilita la validació i l'avaluació d'aplicacions. En el pla de xarxa, es proposa un protocol híbrid, anomenat AVE, per a l'encaminament i el reenviament de paquets usant un conjunt d'estratègies estàndard d'encaminament. Depenent de l'escenari , AVE tria entre quatre estratègies diferents: a) lliurament directe a dos salts, b) Dynamic MANET On-demand (DYMO) c) georouting voraç, i d) una tècnica store-carry-and- forward, per a adaptar-ne el comportament dinàmicament a cada situació. En el pla de transport, es proposa un protocol bidireccional de distribució de continguts en canals amb pèrdues que millora el lliurament de continguts en situacions en què la xarxa és un coll de botella, com les xarxes sense fils. Ha sigut dissenyat, validat, optimitzat, i el seu rendiment ha sigut analitzat en termes de productivitat i eficiència en la utilització de recursos. Finalment, a nivell de sistema, proposem un model de computació assistida que permet reduir la latència en la resposta a moltes consultes col · locant una unitat de computació a la vora de la xarxa, és a dir, la xarxa d'accés. Aquest esquema podria ser usat en xarxes basades en 802.11p i en xarxes cel · lulars, si bé en aquesta tesi decidim centrar-nos en la seua avaluació usant xarxes LTE. La plataforma presentada en aquesta tesi combina tots els esforços indi- viduals per a crear una plataforma única i eficient. Aquest nou entorn pot ser usat per qualsevol proveïdor per a millorar la qualitat de l'experiència d'usuari en els serveis desplegats sobre xarxes vehiculars.Báguena Albaladejo, M. (2017). Design and implementation of simulation tools, protocols and architectures to support service platforms on vehicular networks [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/85333TESISCompendi

The QUIC Fix for Optimal Video Streaming

Within a few years of its introduction, QUIC has gained traction: a significant chunk of traffic is now delivered over QUIC. The networking community is actively engaged in debating the fairness, performance, and applicability of QUIC for various use cases, but these debates are centered around a narrow, common theme: how does the new reliable transport built on top of UDP fare in different scenarios? Support for unreliable delivery in QUIC remains largely unexplored. The option for delivering content unreliably, as in a best-effort model, deserves the QUIC designers' and community's attention. We propose extending QUIC to support unreliable streams and present a simple approach for implementation. We discuss a simple use case of video streaming---an application that dominates the overall Internet traffic---that can leverage the unreliable streams and potentially bring immense benefits to network operators and content providers. To this end, we present a prototype implementation that, by using both the reliable and unreliable streams in QUIC, outperforms both TCP and QUIC in our evaluations.Comment: Published to ACM CoNEXT Workshop on the Evolution, Performance, and Interoperability of QUIC (EPIQ

A packet error recovery scheme for vertical handovers mobility management protocols

Mobile devices are connecting to the Internet through an increasingly heterogeneous network environment. This connectivity via multiple types of wireless networks allows the mobile devices to take advantage of the high speed and the low cost of wireless local area networks and the large coverage of wireless wide area networks. In this context, we propose a new handoff framework for switching seamlessly between the different network technologies by taking advantage of the temporary availability of both the old and the new network technology through the use of an “on the fly” erasure coding method. The goal is to demonstrate that our framework, based on a real implementation of such coding scheme, 1) allows the application to achieve higher goodput rate compared to existing bicasting proposals and other erasure coding schemes; 2) is easy to configure and as a result 3) is a perfect candidate to ensure the reliability of vertical handovers mobility management protocols. In this paper, we present the implementation of such framework and show that our proposal allows to maintain the TCP goodput (with a negligible transmission overhead) while providing in a timely manner a full reliability in challenged conditions

前方誤り訂正技術を用いたTCPの性能向上に関する研究

The growth of the Internet has led to provide a wide variety of network services such as multimedia services, e-commerce, online banking and trading, social network services, and online games. TCP is still commonly used as reliable data-transmission protocol although network environment for such services has significantly changed as described above. However, TCP has an essential problem to provide real-time and delay-sensitive services, by "reactive" control to recover lost packet. To prevent this problem, the number of retransmissions must be kept as low as possible. One efficient way to prevent packet losses by "proactive" control is to apply a technology called "forward error correction" (FEC). This study aimed to improve TCP performance for real-time and delay-sensitive services. To achieve this, I proposed schemes to apply FEC to the entire TCP operation. The effectiveness of the proposed schemes was demonstrated through simulation evaluations.北九州市立大

On the benefits of Cross Layer Feedback in Multi-hop Wireless Networks

Wireless networks operate under harsh and time-varying channel conditions. In wireless networks the time varying channel conditions lead to variable SINR and high BER. The wireless channel is distinct from and more unpredictable than the far more reliable wireline channel. {\em Cross layer feedback} is a mechanism where layers provide {\em selective} information to other layers to boost the performance of wireless networks. {\em Cross layer feedback} can lead to a tremendous increase in the performance of the TCP/IP stack in wireless networks, and an increase in the user's satisfaction level. However, it is possible that naive feedbacks (or optimizations) can work non-coherently; therefore, these can negatively effect the performance of the TCP/IP stack. In this paper, we holistically analyze each layer of the TCP/IP stack, and propose possible Cross layer feedbacks which work coherently. The proposed Cross layer feedbacks can greatly enhance the performance of the TCP/IP stack in wireless networks