TCP performance enhancement over wireless mesh networks by means of the combination of multi-RAT devices and the MPTCP protocol

The last trends at communications realms, in particular, wireless technologies, where it is more and more usual that devices carry more than one interface (i.e. multi-RAT, Radio Access Technology), to get access to the Internet, question the classic single-path paradigm, imposed by the mainstream transport protocol, TCP. In this work we assess the behavior of Multipath TCP (MPTCP), which allows the transparent breakdown of a single TCP session into multiple simultaneous subflows. This straightforward feature might lead to remarkable performance enhancements, yielding as well a stronger resilience against failures within any of the routes. Moreover, we evaluate three different routing algorithms (link, node and zone disjoint) that aim to discover the optimal route configuration of disjoint paths over a Wireless Mesh Network (WMN), exploiting the possibilities arisen by this brand new protocol. We use the obtained results to evaluate, by means of simulation, the behavior of the MPTCP protocol, showing that the aggregated performance is significatively higher than that of achieved by the traditional single-path and single-flow TCP.The authors would like to express their gratitude to the Spanish government for its funding in the project “Connectivity as a Service: Access for the Internet of the Future”, COSAIF (TEC2012-38574-C02-01)

Automotive Cognitive Access: Towards customized vehicular communication system

The evolution of Software Defined Networking (SDN) and Virtualization of mobile Network Functions (NFV) have enabled the new ways of managing mobile access systems and are seen as a major technological foundation of the Fifth Generation (5G) of mobile networks. With the appearance of 5G specifications, the mobile system architecture has the transition from a network of entities to a network of functions. This paradigm shift led to new possibilities and challenges. Existing mobile communication systems rely on closed and inflexible hardware-based architectures both at the access and core network. It implies significant challenges in implementing new techniques to maximize the network capacity, scalability and increasing performance for diverse data services. This work focuses preliminary on the architectural evolutions needed to solve challenges perceived for the next generation of mobile networks. I consider Software defined plus Virtualization featured Mobile Network (S+ MN) architecture as a baseline reference model, aiming at the further improvements to support the access requirements for diverse user groups. I consider an important class of things, vehicles, which needs efficient mobile internet access at both the system and application levels. I identify and describe key requirements of emerging vehicular communications and assess existing standards to determine their limitations. To provide optimized wireless communications for the specific user group, the 5G systems come up with network slicing as a potential solution to create customized networks. Network slicing has the capability to facilitates dynamic and efficient allocation of network resources and support diverse service scenarios and services. A network slice can be broadly defined as an end-to-end logically isolated network that includes end devices as well as access and core network functions. To this effect, I describe the enhanced behaviour of S+ MN architecture for the collection of network resources and details the potential functional grouping provided by S+ MN architecture that paves the way to support automotive slicing. The proposed enhancements support seamless connection mobility addressing the automotive access use case highly mobile environment. I follow the distribution of gateway functions to solve the problem of unnecessary long routes and delays. Exploiting the open SDN capabilities, the proposed S+ NC is able to parallelize the execution of certain control plane messages thus enabling the signalling optimisation. Furthermore, it enables the (Re)selection of efficient data plane paths with implied upper-layer service continuity mechanisms that remove the chains of IP address preservation for session continuity during IP anchor relocation. An implementation setup validates the proposed evolutions, including its core functionalities implemented using the ns-3 network simulator. The proposed slicing scheme has been evaluated through a number of scenarios such as numbers of signalling messages processed by control entities for an intersystem handover procedure relative to current mobile network architecture. I also perform the performance improvement analysis based on simulation results. Furthermore, I experimentally prove the feasibility of using Multipath TCP for connection mobility in intersystem handover scenario. The experiments run over the Linux Kernel implementation of Multipath TCP developed over the last years. I extend the Multipath TCP path management to delegates the management of the data paths according to the application needs. The implementation results have shown that the proposed S+ MN slicing architecture and enhancements achieve benefits in multiple areas, for example improving the mobility control and management, maintaining QoS, smooth handover, session continuity and efficient slice management and orchestration

Cross-layer energy-efficient schemes for multimedia content delivery in heterogeneous wireless networks

The wireless communication technology has been developed focusing on fulfilling the demand in various parts of human life. In many real-life cases, this demand directs to most types of commonly-used rich-media applications which – with diverse traffic patterns - often require high quality levels on the devices of wireless network users. Deliveries of applications with different patterns are accomplished using heterogeneous wireless networks using multiple types of wireless network structure simultaneously. Meanwhile, content deliveries with assuring quality involve increased energy consumption on wireless network devices and highly challenge their limited power resources. As a result, many efforts have been invested aiming at high-quality and energy-efficient rich-media content deliveries in the past years. The research work presented in the thesis focuses on developing energy-aware content delivery schemes in heterogeneous wireless networks. This thesis has four major contributions outlined below: 1. An energy-aware mesh router duty cycle management scheme (AOC-MAC) for high-quality video deliveries over wireless mesh networks. AOC-MAC manages the sleep-periods of mesh devices based on link-state communication condition, reducing their energy consumption by extending their sleep-periods. 2. An energy efficient routing algorithm (E-Mesh) for high-quality video deliveries over wireless mesh networks. E-Mesh evolves an innovative energy-aware OLSR-based routing algorithm by taking energy consumption, router position and network load into consideration. 3. An energy-aware multi-flow-based traffic load balancing scheme (eMTCP) for multi-path content delivery over heterogeneous wireless networks. The scheme makes use of the MPTCP protocol at the upper transport layer of network, allowing data streams to be delivered across multiple consequent paths. Meanwhile, this benefit of MPTCP is also balanced with energy consumption awareness by partially off-loading traffic from the paths with higher energy cost to others. 4. A MPTCP-based traffic-characteristic-aware load balancing mechanism (eMTCP-BT) for heterogeneous wireless networks. In eMTCP-BT, mobile applications are categorized according to burstiness level. eMTCP-BT increases the energy efficiency of the application content deliveries by performing a MDP-based distribution of traffic delivery via the available wireless network interfaces and paths based on the traffic burstiness level

Wireless Bandwidth Aggregation for Internet Traffic

This MQP proposes a new method for bandwidth aggregation, utilize-able by the typical home network owner. The methods explained herein aggregate a network of coordinating routers within local WiFi communication range to achieve increased bandwidth at the application layer, over the HTTP protocol. Our protocol guarantees content delivery and reliability, as well as non-repudiation measures that hold each participant, rather then the group of routers, accountable for the content they download

On three use cases of multi-connectivity paradigm in emerging wireless networks

As envisioned by global network operators, the increasing trend of data traffic demand is expected to continue with exponential growth in the coming years. To cope with this rapid increase, significant efforts from the research community, industry and even regulators have been focused towards improving two main aspects of the wireless spectrum: (i) spectrum capacity and (ii) spectral efficiency. Concerning the spectrum capacity enhancement, the multi-connectivity paradigm has been seen to be fundamentally important to solve the capacity problem in the next generation networks. Multi-connectivity is a feature that allows wireless devices to establish and maintain multiple simultaneous connections across homogeneous or heterogeneous technologies. In this thesis, we focus on identifying the core issues in applying the multi-connectivity paradigm for different use cases and propose novel solutions to address them. Specifically, this thesis studies three use cases of the multi-connectivity paradigm. First, we study the uplink/downlink decoupling problem in 4G networks. More specifically, we focus on the user association problem in the decoupling context, which is considered challenging due to the conflicting objectives of different entities (e.g., mobile users and base stations) in the system. We use a combination of matching theory and stochastic geometry to reconcile competing objectives between users in the uplink/downlink directions and also from the perspective of base stations. Second, we tackle the spectrum aggregation problem for wireless backhauling links in unlicensed opportunistic shared spectrum bands, specifically, TV White Space (TVWS) spectrum. In relation to this, we present a DIY mobile network deployment model to accelerate the roll-out of high-end mobile services in rural and developing regions. As part of this model, we highlight the importance of low-cost and high-capacity backhaul infrastructure for which TVWS spectrum can be exploited. Building on that, we conduct a thorough analytical study to identify the characteristics of TVWS in rural areas. Our study sheds light on the nature of TVWS spectrum fragmentation for the backhauling use case, which in turn poses requirements for the design of spectrum aggregation systems for TVWS backhaul. Motivated by these findings, we design and implement WhiteHaul, a flexible platform for spectrum aggregation in TVWS. Three challenges have been tackled in this work. First, TVWS spectrum is fragmented in that the spectrum is available in non-contiguous manner. To fully utilize the available spectrum, multiple radios should be enabled to work simultaneously. However, all the radios have to share only a single antenna. The key challenge is to design a system architecture that is capable of achieving different aggregation configurations while avoiding the interference. Second, the heterogeneous nature of the available spectrum (i.e., in terms of bandwidth and link characteristics) requires a design of efficient traffic distribution algorithm that takes into account these factors. Third, TVWS is unlicensed opportunistic shared spectrum. Thus, the coordination mechanism between the two nodes of backhauling link is essential to enable seamless channel switching. Third, we study the integration of multiple radio access technologies (RATs) in the context of 4G/5G networks. More specifically, we study the potential gain of enabling the Multi-RAT integration at the Packet Data Convergence Protocol (PDCP) layer compared with doing it at the transport layer. In this work, we consider ultra-reliable low-latency communication (URLLC) as one of the motivating services. This work tackles the different challenges that arise from enabling the Multi-RAT integration at the PDCP layer, including, packet reordering and traffic scheduling

Journal of Telecommunications and Information Technology, 2018, nr 2

kwartalni

Improving Network Performance Through Endpoint Diagnosis And Multipath Communications

Components of networks, and by extension the internet can fail. It is, therefore, important to find the points of failure and resolve existing issues as quickly as possible. Resolution, however, takes time and its important to maintain high quality of service (QoS) for existing clients while it is in progress. In this work, our goal is to provide clients with means of avoiding failures if/when possible to maintain high QoS while enabling them to assist in the diagnosis process to speed up the time to recovery. Fixing failures relies on first detecting that there is one and then identifying where it occurred so as to be able to remedy it. We take a two-step approach in our solution. First, we identify the entity (Client, Server, Network) responsible for the failure. Next, if a failure is identified as network related additional algorithms are triggered to detect the device responsible. To achieve the first step, we revisit the question: how much can you infer about a failure using TCP statistics collected at one of the endpoints in a connection? Using an agent that captures TCP statistics at one of the end points we devise a classification algorithm that identifies the root cause of failures. Using insights derived from this classification algorithm we identify dominant TCP metrics that indicate where/why problems occur. If/when a failure is identified as a network related problem, the second step is triggered, where the algorithm uses additional information that is collected from ``failed\u27\u27 connections to identify the device which resulted in the failure. Failures are also disruptive to user\u27s performance. Resolution may take time. Therefore, it is important to be able to shield clients from their effects as much as possible. One option for avoiding problems resulting from failures is to rely on multiple paths (they are unlikely to go bad at the same time). The use of multiple paths involves both selecting paths (routing) and using them effectively. The second part of this thesis explores the efficacy of multipath communication in such situations. It is expected that multi-path communications have monetary implications for the ISP\u27s and content providers. Our solution, therefore, aims to minimize such costs to the content providers while significantly improving user performance

A Survey on Security and Privacy of 5G Technologies: Potential Solutions, Recent Advancements, and Future Directions

Security has become the primary concern in many telecommunications industries today as risks can have high consequences. Especially, as the core and enable technologies will be associated with 5G network, the confidential information will move at all layers in future wireless systems. Several incidents revealed that the hazard encountered by an infected wireless network, not only affects the security and privacy concerns, but also impedes the complex dynamics of the communications ecosystem. Consequently, the complexity and strength of security attacks have increased in the recent past making the detection or prevention of sabotage a global challenge. From the security and privacy perspectives, this paper presents a comprehensive detail on the core and enabling technologies, which are used to build the 5G security model; network softwarization security, PHY (Physical) layer security and 5G privacy concerns, among others. Additionally, the paper includes discussion on security monitoring and management of 5G networks. This paper also evaluates the related security measures and standards of core 5G technologies by resorting to different standardization bodies and provide a brief overview of 5G standardization security forces. Furthermore, the key projects of international significance, in line with the security concerns of 5G and beyond are also presented. Finally, a future directions and open challenges section has included to encourage future research.European CommissionNational Research Tomsk Polytechnic UniversityUpdate citation details during checkdate report - A

Flexible cross layer optimization for fixed and mobile broadband telecommunication networks and beyond

In der heutigen Zeit, in der das Internet im Allgemeinen und Telekommunikationsnetze im Speziellen kritische Infrastrukturen erreicht haben, entstehen hohe Anforderungen und neue Herausforderungen an den Datentransport in Hinsicht auf Effizienz und Flexibilität. Heutige Telekommunikationsnetze sind jedoch rigide und statisch konzipiert, was nur ein geringes Maß an Flexibilität und Anpassungsfähigkeit der Netze ermöglicht und darüber hinaus nur im begrenzten Maße die Wichtigkeit von Datenflüssen im wiederspiegelt. Diverse Lösungsansätze zum kompletten Neuentwurf als auch zum evolutionären Konzept des Internet wurden ausgearbeitet und spezifiziert, um diese neuartigen Anforderungen und Herausforderungen adäquat zu adressieren. Einer dieser Ansätze ist das Cross Layer Optimierungs-Paradigma, welches eine bisher nicht mögliche direkte Kommunikation zwischen verteilten Funktionalitäten unterschiedlichen Typs ermöglicht, um ein höheres Maß an Dienstgüte zu erlangen. Ein wesentlicher Indikator, welcher die Relevanz dieses Ansatzes unterstreicht, zeichnet sich durch die Programmierbarkeit von Netzwerkfunktionalitäten aus, welche sich aus der Evolution von heutigen hin zu zukünftigen Netzen erkennen lässt. Dieses Konzept wird als ein vielversprechender Lösungsansatz für Kontrollmechanismen von Diensten in zukünftigen Kernnetzwerken erachtet. Dennoch existiert zur Zeit der Entstehung dieser Doktorarbeit kein Ansatz zur Cross Layer Optimierung in Festnetz-und Mobilfunknetze, welcher der geforderten Effizienz und Flexibilität gerecht wird. Die übergeordnete Zielsetzung dieser Arbeit adressiert die Konzeptionierung, Entwicklung und Evaluierung eines Cross Layer Optimierungsansatzes für Telekommunikationsnetze. Einen wesentlichen Schwerpunkt dieser Arbeit stellt die Definition einer theoretischen Konzeptionierung und deren praktischer Realisierung eines Systems zur Cross Layer Optimierung für Telekommunikationsnetze dar. Die durch diese Doktorarbeit analysierten wissenschaftlichen Fragestellungen betreffen u.a. die Anwendbarkeit von Cross Layer Optimierungsansätzen auf Telekommunikationsnetzwerke; die Betrachtung neuartiger Anforderungen; existierende Konzepte, Ansätze und Lösungen; die Abdeckung neuer Funktionalitäten durch bereits existierende Lösungen; und letztendlich den erkennbaren Mehrwert des neu vorgeschlagenen Konzepts gegenüber den bestehenden Lösungen. Die wissenschaftlichen Beiträge dieser Doktorarbeit lassen sich grob durch vier Säulen skizzieren: Erstens werden der Stand der Wissenschaft und Technik analysiert und bewertet, Anforderungen erhoben und eine Lückenanalyse vorgenommen. Zweitens werden Herausforderungen, Möglichkeiten, Limitierungen und Konzeptionierungsaspekte eines Modells zur Cross Layer Optimierung analysiert und evaluiert. Drittens wird ein konzeptionelles Modell - Generic Adaptive Resource Control (GARC) - spezifiziert, als Prototyp realisiert und ausgiebig validiert. Viertens werden theoretische und praktische Beiträge dieser Doktorarbeit vertiefend analysiert und bewertet.As the telecommunication world moves towards a data-only network environment, signaling, voice and other data are similarly transported as Internet Protocol packets. New requirements, challenges and opportunities are bound to this transition and influence telecommunication architectures accordingly. In this time in which the Internet in general, and telecommunication networks in particular, have entered critical infrastructures and systems, it is of high importance to guarantee efficient and flexible data transport. A certain level of Quality-of-Service (QoS) for critical services is crucial even during overload situations in the access and core network, as these two are the bottlenecks in the network. However, the current telecommunication architecture is rigid and static, which offers very limited flexibility and adaptability. Several concepts on clean slate as well as evolutionary approaches have been proposed and defined in order to cope with these new challenges and requirements. One of these approaches is the Cross Layer Optimization paradigm. This concept omits the strict separation and isolation of the Application-, Control- and Network-Layers as it enables interaction and fosters Cross Layer Optimization among them. One indicator underlying this trend is the programmability of network functions, which emerges clearly during the telecommunication network evolution towards the Future Internet. The concept is regarded as one solution for service control in future mobile core networks. However, no standardized approach for Cross Layer signaling nor optimizations in between the individual layers have been standardized at the time this thesis was written. The main objective of this thesis is the design, implementation and evaluation of a Cross Layer Optimization concept on telecommunication networks. A major emphasis is given to the definition of a theoretical model and its practical realization through the implementation of a Cross Layer network resource optimization system for telecommunication systems. The key questions answered through this thesis are: in which way can the Cross Layer Optimization paradigm be applied on telecommunication networks; which new requirements arise; which of the required functionalities cannot be covered through existing solutions, what other conceptual approaches already exist and finally whether such a new concept is viable. The work presented in this thesis and its contributions can be summarized in four parts: First, a review of related work, a requirement analysis and a gap analysis were performed. Second, challenges, limitations, opportunities and design aspects for specifying an optimization model between application and network layer were formulated. Third, a conceptual model - Generic Adaptive Resource Control (GARC) - was specified and its prototypical implementation was realized. Fourth, the theoretical and practical thesis contributions was validated and evaluated