An Efficient Power Estimation Methodology for Complex RISC Processor-based Platforms

International audienceIn this contribution, we propose an efficient power estima- tion methodology for complex RISC processor-based plat- forms. In this methodology, the Functional Level Power Analysis (FLPA) is used to set up generic power models for the different parts of the system. Then, a simulation framework based on virtual platform is developed to evalu- ate accurately the activities used in the related power mod- els. The combination of the two parts above leads to a het- erogeneous power estimation that gives a better trade-off be- tween accuracy and speed. The usefulness and effectiveness of our proposed methodology is validated through ARM9 and ARM CortexA8 processor designed respectively around the OMAP5912 and OMAP3530 boards. This efficiency and the accuracy of our proposed methodology is evaluated by using a variety of basic programs to complete media bench- marks. Estimated power values are compared to real board measurements for the both ARM940T and ARM CortexA8 architectures. Our obtained power estimation results pro- vide less than 3% of error for ARM940T processor, 3.5% for ARM CortexA8 processor-based system and 1x faster compared to the state-of-the-art power estimation tools

From FPGA to ASIC: A RISC-V processor experience

This work document a correct design flow using these tools in the Lagarto RISC- V Processor and the RTL design considerations that must be taken into account, to move from a design for FPGA to design for ASIC

FLECSim-SoC: A Flexible End-to-End Co-Design Simulation Framework for System on Chips

Hardware accelerators for deep neural networks (DNNs) have established themselves over the past decade. Most developments have worked towards higher efficiency with an individual application in mind. This highlights the strong relationship between co-designing the accelerator together with the requirements of the application. Currently for a structured design flow, however, it lacks a tool to evaluate a DNN accelerator embedded in a System on Chip (SoC) platform.To address this gap in the state of the art, we introduce FLECSim, a tool framework that enables an end-to-end simulation of an SoC with dedicated accelerators, CPUs and memories. FLECSim offers flexible configuration of the system and straightforward integration of new accelerator models in both SystemC and RTL, which allows for early design verification. During the simulation, FLECSim provides metrics of the SoC, which can be used to explore the design space. Finally, we present the capabilities of FLECSim, perform an exemplary evaluation with a systolic array-based accelerator and explore the design parameters in terms of accelerator size, power and performance

Reconfigurable Model for RISC Processors

The instruction set of a processor is embodied in the particular micro-architecture representing the processor hardware. Verifying proper operation of the instruction set for a particular processor hardware implementation requires exhaustive testing to expose unknown dependencies and other elusive design flaws. This paper presents the research and development of a flexible micro-architectural model written in SystemC for a RISC processor based upon a user defined configuration database; the RISC processor is based on an architecture assigned in course Design of Computer Systems (DCS) offered at Rochester Institute of Technology (RIT). This model will be tested by a test bench written in SystemVerilog, using randomly generated instructions, and results will be compared with various DCS student processors originally developed at the Register Transfer Level (RTL) in a Hardware Description Language (HDL) such as Verilog or VHDL. The test bench will provide stimulus such as the system clock and random instructions through a program memory attached to both the model and RTL processor. The main goal of this work is to automate verification and validation of a diverse set of processors designed in RTL by using an appropriate configuration database and comparison of all states and signals from the processor being tested and the model developed by the author. The test results will be compared and discussed

Multilevel simulation-based co-design of next generation HPC microprocessors

This paper demonstrates the combined use of three simulation tools in support of a co-design methodology for an HPC-focused System-on-a-Chip (SoC) design. The simulation tools make different trade-offs between simulation speed, accuracy and model abstraction level, and are shown to be complementary. We apply the MUSA trace-based simulator for the initial sizing of vector register length, system-level cache (SLC) size and memory bandwidth. It has proven to be very efficient at pruning the design space, as its models enable sufficient accuracy without having to resort to highly detailed simulations. Then we apply gem5, a cycle-accurate micro-architecture simulator, for a more refined analysis of the performance potential of our reference SoC architecture, with models able to capture detailed hardware behavior at the cost of simulation speed. Furthermore, we study the network-on-chip (NoC) topology and IP placements using both gem5 for representative small- to medium-scale configurations and SESAM/VPSim, a transaction-level emulator for larger scale systems with good simulation speed and sufficient architectural details. Overall, we consider several system design concerns, such as processor subsystem sizing and NoC settings. We apply the selected simulation tools, focusing on different levels of abstraction, to study several configurations with various design concerns and evaluate them to guide architectural design and optimization decisions. Performance analysis is carried out with a number of representative benchmarks. The obtained numerical results provide guidance and hints to designers regarding SIMD instruction width, SLC sizing, memory bandwidth as well as the best placement of memory controllers and NoC form factor. Thus, we provide critical insights for efficient design of future HPC microprocessors.This work has been performed in the context of the European Processor Initiative (EPI) project, which has received funding from the European Union’s Horizon 2020 research and innovation program under Grant Agreement № 826647. A special thanks to Amir Charif and Arief Wicaksana for their invaluable contributions to the SESAM/VPSim tool in the initial phases of the EPI project.Peer ReviewedPostprint (author's final draft

Agile SoC Development with Open ESP

ESP is an open-source research platform for heterogeneous SoC design. The platform combines a modular tile-based architecture with a variety of application-oriented flows for the design and optimization of accelerators. The ESP architecture is highly scalable and strikes a balance between regularity and specialization. The companion methodology raises the level of abstraction to system-level design and enables an automated flow from software and hardware development to full-system prototyping on FPGA. For application developers, ESP offers domain-specific automated solutions to synthesize new accelerators for their software and to map complex workloads onto the SoC architecture. For hardware engineers, ESP offers automated solutions to integrate their accelerator designs into the complete SoC. Conceived as a heterogeneous integration platform and tested through years of teaching at Columbia University, ESP supports the open-source hardware community by providing a flexible platform for agile SoC development.Comment: Invited Paper at the 2020 International Conference On Computer Aided Design (ICCAD) - Special Session on Opensource Tools and Platforms for Agile Development of Specialized Architecture

The review of heterogeneous design frameworks/Platforms for digital systems embedded in FPGAs and SoCs

Systems-on-a-chip integrate specialized modules to provide well-defined functionality. In order to guarantee its efficiency, designersare careful to choose high-level electronic components. In particular,FPGAs (field-programmable gate array) have demonstrated theirability to meet the requirements of emerging technology. However,traditional design methods cannot keep up with the speed andefficiency imposed by the embedded systems industry, so severalframeworks have been developed to simplify the design process of anelectronic system, from its modeling to its physical implementation.This paper illustrates some of them and presents a comparative studybetween them. Indeed, we have selected design methods of SoC(ESP4ML and HLS4ML, OpenESP, LiteX, RubyRTL, PyMTL,SysPy, PyRTL, DSSoC) and NoC networks on OCN chip (PyOCN)and in general on FPGA (PRGA, OpenFPGA, AnyHLS, PYNQ, andPyLog).The objective of this article is to analyze each tool at several levelsand to discuss the benefit of each in the scientific community. Wewill analyze several aspects constituting the architecture and thestructure of the platforms to make a comparative study of thehardware and software design flows of digital systems.