Doubly Orthogonal Wavelet Packets for Multi-Users Indoor Visible Light Communication Systems

Visible Light Communication (VLC) is a data communication technology that modulates the intensity of the light to transmit the information mostly by means of Light Emitting Diodes (LEDs). The data rate is mainly throttled by the limited bandwidth of the LEDs. To combat, Multi-carrier Code Division Multiple Access (MC-CDMA) is a favorable technique for achieving higher data rates along with reduced Inter-Symbol Interference (ISI) and easy access to multi-users at the cost of slightly reduced compromised spectral efficiency and Multiple Access Interference (MAI). In this article, a multi-user VLC system is designed using a Discrete Wavelet Transform (DWT) that eradicates the use of cyclic prefix due to the good orthogonality and time-frequency localization properties of wavelets. Moreover, the design also comprises suitable signature codes, which are generated by employing double orthogonality depending upon Walsh codes and Wavelet Packets. The proposed multi-user system is simulated in MATLAB software and its overall performance is assessed using line-of-sight (LoS) and non-line-of-sight (NLoS) configurations. Furthermore, two sub-optimum multi-users detection schemes such as zero forcing (ZF) and minimum-mean-square-error (MMSE) are also used at the receiver. The simulated results illustrate that the doubly orthogonal signature waveform-based DWT-MC-CDMA with MMSE detection scheme outperforms the Walsh code-based multi-user system

An Investigation of Orthogonal Wavelet Division Multiplexing Techniques as an Alternative to Orthogonal Frequency Division Multiplex Transmissions and Comparison of Wavelet Families and Their Children

Recently, issues surrounding wireless communications have risen to prominence because of the increase in the popularity of wireless applications. Bandwidth problems, and the difficulty of modulating signals across carriers, represent significant challenges. Every modulation scheme used to date has had limitations, and the use of the Discrete Fourier Transform in OFDM (Orthogonal Frequency Division Multiplex) is no exception. The restriction on further development of OFDM lies primarily within the type of transform it uses in the heart of its system, Fourier transform. OFDM suffers from sensitivity to Peak to Average Power Ratio, carrier frequency offset and wasting some bandwidth to guard successive OFDM symbols. The discovery of the wavelet transform has opened up a number of potential applications from image compression to watermarking and encryption. Very recently, work has been done to investigate the potential of using wavelet transforms within the communication space. This research will further investigate a recently proposed, innovative, modulation technique, Orthogonal Wavelet Division Multiplex, which utilises the wavelet transform opening a new avenue for an alternative modulation scheme with some interesting potential characteristics. Wavelet transform has many families and each of those families has children which each differ in filter length. This research consider comprehensively investigates the new modulation scheme, and proposes multi-level dynamic sub-banding as a tool to adapt variable signal bandwidths. Furthermore, all compactly supported wavelet families and their associated children of those families are investigated and evaluated against each other and compared with OFDM. The linear computational complexity of wavelet transform is less than the logarithmic complexity of Fourier in OFDM. The more important complexity is the operational complexity which is cost effectiveness, such as the time response of the system, the memory consumption and the number of iterative operations required for data processing. Those complexities are investigated for all available compactly supported wavelet families and their children and compared with OFDM. The evaluation reveals which wavelet families perform more effectively than OFDM, and for each wavelet family identifies which family children perform the best. Based on these results, it is concluded that the wavelet modulation scheme has some interesting advantages over OFDM, such as lower complexity and bandwidth conservation of up to 25%, due to the elimination of guard intervals and dynamic bandwidth allocation, which result in better cost effectiveness

Otimização de soluções de fotónica integrada para sistemas óticos de nova geração

Next generation optical systems can highly benefit from optimized photonic integrated solutions. Photonic integrated circuits (PIC) appear as a promising technology under the current demand for flexibility/reconfigurability in optical systems and telecommunications networks. PIC-based optical systems offer an efficient and cost-effective solution to data transmission increasing claims. In order to contribute to the development of integrated photonic technology, optimized PIC solutions addressing different steps of the PIC development chain, mainly design, testing, and packaging processes, are investigated. Optical signal data compression techniques are progressing to sustain the fast processing/storing of large amounts of bandwidth demanding data, with the advantage of resorting to photonic integrated solutions for the implementation of optical transforms, e.g., Haar transform (HT). This demand motivated the research of an optimized PIC design solution in silicon nitride (Si3N4) based platform comprising a two-level HT network for compression, and a switching network as a framework that supplies all logical inputs of the HT network for testing/characterization purposes. Optimized design models for the multimode interference key building block structure of the PIC design solution, are proposed. Additionally, a first test and characterization of PIC solutions implementing the HT for compression applications in indium phosphide (InP) based platform and in a new organic-inorganic hybrid material were realized. Taking advantage of a tunable lattice filter dispersion compensator in Si3N4-based integrated platform, it was demonstrated a real-time extended reach PAM-4 transmission over 40 km enabled by the photonic integrated dispersion compensator, with application in data center interconnects. Under photonic integrated high-Q resonators need for accurate performance measurement, a technique based on RF calibrated Mach-Zehnder interferometer, and Brillouin gain measurements through Lorentzian fitting analysis were successfully attained. Finally, as technical and functional requirements of PIC demand a thorough characterization/testing to provide an accurate prediction of its performance, and current testing platforms can be expensive and have low flexibility, a proof of concept of a new soft-packaging flexible platform for photonic integrated processors and spatial division multiplexing systems, based in spatial light modulation operation principle is proposed.Os sistemas óticos de nova geração beneficiam com a otimização de fotónica integrada. Com os circuitos de fotónica integrada (PIC) avançados a surgir como uma tecnologia promissora, dentro da crescente procura por flexibilidade/ reconfigurabilidade dos sistemas óticos e redes de telecomunicações. Os sistemas óticos baseados em PIC oferecem soluções eficientes e rentáveis em resposta às necessidades crescentes de transmissão de dados. De modo a contribuir para o desenvolvimento tecnológico associado à fotónica integrada, são investigados no âmbito desta dissertação diferentes soluções otimizadas de PIC, abordando diferentes estágios do seu desenvolvimento, nomeadamente projeto/design, teste e encapsulamento. Técnicas de compressão de sinais óticos estão a progredir no sentido de apoiar a expansão de velocidade de processamento e quantidade de armazenamento com elevada largura de banda associada. São esperadas vantagens recorrendo a PIC para a implementação de transformadas óticas, e.g., transformada de Haar (HT). Esta necessidade motivou a investigação de soluções de PIC com design otimizado, desenvolvidas em plataforma integrada de nitreto de silício (Si3N4). O PIC desenhado é constituído por uma rede 2D a executar a HT para fins de compressão e uma rede de comutação para produzir todas as entradas lógicas esperadas para teste e caracterização. São propostos modelos de design otimizados para a estrutura elementar que compõe o PIC, i.e., componente de interferência multimodal. Adicionalmente, foi realizado o primeiro teste e caracterização experimental de um PIC implementando a HT para fins de compressão, numa plataforma integrada de fosfato de índio (InP) e num material orgânico-inorgânico híbrido. Tirando partido de um filtro sintonizável para compensação de dispersão, desenvolvido em plataforma integrada de Si3N4, foi demostrado um link de transmissão alargada (40 km) em modulação PAM-4, com possível aplicação em centros de processamento de dados de interconexão. A necessidade de medições precisas de desempenho para a caracterização efetiva de soluções integradas de ressoadores de elevado fator de qualidade, motivou a implementação de uma técnica de medição eficaz. Esta é baseada num interferómetro de Mach-Zehnder calibrado em rádio frequência e na realização de mediações de ganho de Brillouin por análise Lorentziana de ajuste de curva. Por fim, tendo em conta os rigorosos requisitos técnicos e funcionais associados ao teste/caracterização precisa de PIC e o facto de as atuais soluções serem dispendiosas e pouco flexíveis. Uma prova de conceito de uma nova plataforma flexível de encapsulamento por software é proposta com aplicação em processadores PIC e sistemas com multiplexagem por divisão espacial.Programa Doutoral em Telecomunicaçõe

Employing VLC technology for transmitting data in biological tissue

Abstract. With the development in wireless communication methods, visible light communication (VLC), a subset of Optical Wireless Communication (OWC) has garnered much attention to employ the technology for a secure short-range wireless communication. We present a feasibility study to determine the performance of VLC in short range wireless transmission of data through biological tissue. VLC is a cost efficient and secure means of transmitting high volume of data wirelessly which can considerably reduce the interference issues caused by electromagnetic pulses and external electric fields. We present a simple measurement approach based on Monte Carlo simulation of photon propagation in tissue to estimate the strength of wireless communication with body implant devices. Using light for communication brings inherent security against unauthorized access of digital data which could be acquired from the low energy body implant devices used for medical diagnosis and other studies. This thesis discusses the typical components required to establish VLC such as, transmitter, receiver and the channel mediums. Furthermore, two cases of Monte Carlo simulation of photon-tissue interaction are studied to determine a possibility if VLC is a suitable substitute to radio frequency (RF) for a more wireless communication with the body implants. The process of theoretical measurement begins with conversion of light intensity into an electrical signal and an estimation of achievable data rate through a complex heterogeneous biological tissue model. The theoretically achieved data rates of the communication were found to be in the order of megabits per second (Mbps), ensuring a possibility to utilize this technology for short range reliable wireless communication with a wider range and application of implant medical devices. Biophotonics.fi presents a computational simulation of light propagation in different types of computational tissue models comprehensively validated by comparison with the team’s practical implementation of the same setup. This simulation is also used in this thesis (5.2.2) to approximate more accurate data rates of communication in case of a practical implementation

State-of-the-art in Power Line Communications: from the Applications to the Medium

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and broadband systems, covering potential applications, regulatory and standardization efforts and recent research advancements in channel characterization, physical layer performance, medium access and higher layer specifications and evaluations. We also identify areas of current and further study that will enable the continued success of power line communication technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on Selected Areas in Communications. Special Issue on Power Line Communications and its Integration with the Networking Ecosystem. 201

OFDM techniques for multimedia data transmission

Orthogonal Frequency Division Multiplexing (OFDM) is an efficient parallel data transmission scheme that has relatively recently become popular in both wired and wireless communication systems for the transmission of multimedia data. OFDM can be found at the core of well known systems such as digital television/radio broadcasting, ADSL internet and wireless LANs. Research into the OFDM field continually looks at different techniques to attempt to make this type of transmission more efficient. More recent works in this area have considered the benefits of using wavelet transforms in place of the Fourier transforms traditionally used in OFDM systems and other works have looked at data compression as a method of increasing throughput in these types of transmission systems. The work presented in this thesis considers the transmission of image and video data in traditional OFDM transmission and discusses the strengths and weaknesses of this method. This thesis also proposes a new type of OFDM system that combines transmission and data compression into one block. By merging these two processes into one the complexity of the system is reduced, therefore promising to increase system efficiency. The results presented in this thesis show the novel compressive OFDM method performs well in channels with a low signal-to-noise ratio. Comparisons with traditional OFDM with lossy compression show a large improvement in the quality of the data received with the new system when used in these noisy channel environments. The results also show superior results are obtained when transmitting image and video data using the new method, the high correlative properties of images are ideal for effective transmission using the new technique. The new transmission technique proposed in this thesis also gives good results when considering computation time. When compared to MATLAB simulations of a traditional DFT-based OFDM system with a separate compression block, the proposed transmission method was able to reduce the computation time by between a half to three-quarters. This decrease in computational complexity also contributes to transmission efficiency when considering the new method

The realization of signal processing methods and their hardware implementation over multi-carrier modulation using FPGA technology. Validation and implementation of multi-carrier modulation on FPGA, and signal processing of the channel estimation techniques and filter bank architectures for DWT using HDL coding for mobile and wireless applications.

First part of this thesis presents the design, validation, and implementation of an Orthogonal Frequency Division Multiplexing (OFDM) transmitter and receiver on a Cyclone II FPGA chip using DSP builder and Quartus II high level design tools. The resources in terms of logical elements (LE) including combinational functions and logic registers allocated by the model have been investigated and addressed. The result shows that implementing the basic OFDM transceiver allocates about 14% (equivalent to 6% at transmitter and 8% at receiver) of the available LE resources on an Altera Cyclone II EP2C35F672C6 FPGA chip, largely taken up by the FFT, IFFT and soft decision encoder. Secondly, a new wavelet-based OFDM system based on FDPP-DA based channel estimation is proposed as a reliable ECG Patient Monitoring System, a Personal Wireless telemedicine application. The system performance for different wavelet mothers has been investigated. The effects of AWGN and multipath Rayleigh fading channels have also been studied in the analysis. The performances of FDPP-DA and HDPP-DA-based channel estimations are compared based on both DFT-based OFDM and wavelet-based OFDM systems. The system model was studied using MATLAB software in which the average BER was addressed for randomized data. The main error differences that reflect the quality of the received ECG signals between the reconstructed and original ECG signals are established. Finally a DA-based architecture for 1-D iDWT/DWT based on an OFDM model is implemented for an ECG-PMS wireless telemedicine application. In the portable wireless body transmitter unit at the patient site, a fully Serial-DA-based scheme for iDWT is realized to support higher hardware utilization and lower power consumption; whereas a fully Parallel-DA-based scheme for DWT is applied at the base unit of the hospital site to support a higher throughput. It should be noted that the behavioural level of HDL models of the proposed system was developed and implemented to confirm its correctness in simulation. Then, after the simulation process the design models were synthesised and implemented for the target FPGA to confirm their validation