Tool for a configurable integrated circuit that uses determination of dynamic power consumption

A configurable logic tool that allows minimization of dynamic power within an FPGA design without changing user-entered specifications. The minimization of power may use minimized clock nets as a first order operation, and a second order operation that minimizes other factors, such as area of placement, area of clocks and/or slack

Enhancing Power Efficient Design Techniques in Deep Submicron Era

Excessive power dissipation has been one of the major bottlenecks for design and manufacture in the past couple of decades. Power efficient design has become more and more challenging when technology scales down to the deep submicron era that features the dominance of leakage, the manufacture variation, the on-chip temperature variation and higher reliability requirements, among others. Most of the computer aided design (CAD) tools and algorithms currently used in industry were developed in the pre deep submicron era and did not consider the new features explicitly and adequately. Recent research advances in deep submicron design, such as the mechanisms of leakage, the source and characterization of manufacture variation, the cause and models of on-chip temperature variation, provide us the opportunity to incorporate these important issues in power efficient design. We explore this opportunity in this dissertation by demonstrating that significant power reduction can be achieved with only minor modification to the existing CAD tools and algorithms. First, we consider peak current, which has become critical for circuit's reliability in deep submicron design. Traditional low power design techniques focus on the reduction of average power. We propose to reduce peak current while keeping the overhead on average power as small as possible. Second, dual Vt technique and gate sizing have been used simultaneously for leakage savings. However, this approach becomes less effective in deep submicron design. We propose to use the newly developed process-induced mechanical stress to enhance its performance. Finally, in deep submicron design, the impact of on-chip temperature variation on leakage and performance becomes more and more significant. We propose a temperature-aware dual Vt approach to alleviate hot spots and achieve further leakage reduction. We also consider this leakage-temperature dependency in the dynamic voltage scaling approach and discover that a commonly accepted result is incorrect for the current technology. We conduct extensive experiments with popular design benchmarks, using the latest industry CAD tools and design libraries. The results show that our proposed enhancements are promising in power saving and are practical to solve the low power design challenges in deep submicron era

Block level voltage

Over the past years, state-of-art power optimization methods move towards higher abstraction levels that result in more efficient power savings. Among existing power optimization approaches, dynamic power management (DPM) is considered to be one of the most effective strategies. Depending on abstraction levels, DPM can be implemented in different formats but here we focus on scheduling that is more suitable for real-time system design use. This differs from the concurrent scheduling approaches that start from either the HLS (High-Level Synthesis) or RTS (Real-Time System) point of view, we propose a synergy solution of both approaches, namely block-level voltage/frequency scheduling (BLVFS). The presented block-level voltage/ frequency scheduling approach shows a generic solution for low power SoC (System on Chip) system design while the approaches which belong to the HLS and RTS categories have a strong dependency on the system functionalities. Consider a SoC as a combination of heterogeneous functional blocks, our approach provides efficient power savings by dynamically scheduling the scaling of voltage and frequency at the same time. Simulation results indicate that by using heuristic based strategies significant power savings can be achieved

Simultaneous slack budgeting and retiming for synchronous circuits optimization

Abstract- With the challenges of growing functionality and scaling chip size, the possible performance improvements should be considered in the earlier IC design stages, which gives more freedom to the later optimization. Potential slack as an effective metric of possible performance improvements is considered in this work which, as far as we known, is the first work that maximizes the potential slack by retiming for synchronous sequential circuit. A simultaneous slack budgeting and incremental retiming algorithm is proposed for maximizing potential slack. The overall slack budget is optimized by relocating the FFs iteratively with the MIS-based slack estimation. Compared with the potential slack of a well-known min-period retiming, our algorithm improves potential slack averagely 19.6 % without degrading the circuit performance in reasonable runtime. Furthermore, at the expense of a small amount of timing performance, 0.52 % and 2.08%, the potential slack is increased averagely by 19.89 % and 28.16 % separately, which give a hint of the tradeoff between the timing performance and the slack budget.

Modelling and directionally encoding the acoustics of a room

Geometrical methods are often used to model the acoustic properties of a room, but are valid only for high frequencies. At low frequencies. diffraction and the effects of room modes cannot be neglected. A method for modelling the two-dimensional propagation of sound within an enclosed room is presented which encompasses both of these particular properties by making use of a digital waveguide model

Energy-Centric Scheduling for Real-Time Systems

Energy consumption is today an important design issue for all kinds of digital systems, and essential for the battery operated ones. An important fraction of this energy is dissipated on the processors running the application software. To reduce this energy consumption, one may, for instance, lower the processor clock frequency and supply voltage. This, however, might lead to a performance degradation of the whole system. In real-time systems, the crucial issue is timing, which is directly dependent on the system speed. Real-time scheduling and energy efficiency are therefore tightly connected issues, being addressed together in this work. Several scheduling approaches for low energy are described in the thesis, most targeting variable speed processor architectures. At task level, a novel speed scheduling algorithm for tasks with probabilistic execution pattern is introduced and compared to an already existing compile-time approach. For task graphs, a list-scheduling based algorithm with an energy-sensitive priority is proposed. For task sets, off-line methods for computing the task maximum required speeds are described, both for rate-monotonic and earliest deadline first scheduling. Also, a run-time speed optimization policy based on slack re-distribution is proposed for rate-monotonic scheduling. Next, an energy-efficient extension of the earliest deadline first priority assignment policy is proposed, aimed at tasks with probabilistic execution time. Finally, scheduling is examined in conjunction with assignment of tasks to processors, as parts of various low energy design flows. For some of the algorithms given in the thesis, energy measurements were carried out on a real hardware platform containing a variable speed processor. The results confirm the validity of the initial assumptions and models used throughout the thesis. These experiments also show the efficiency of the newly introduced scheduling methods