Joint access-backhaul mechanisms in 5G cell-less architectures

Older generations of wireless networks, such as 1G and 2G were deployed using leased line, copper or fibre line as backhaul. Later, in 3G and 4G, microwave wireless links have also worked as backhaul links while the backbone of the network was still wireline-based. However, due to multiple different use cases and deployment scenarios of 5G, solo wireline based backhaul network is not a cost-efficient option for the operators anymore. For cost-efficient and fast deployment, wireless backhaul options are very attractive. As drawbacks, wireless backhaul links have capacity and distance limitations. To take the advantages of both the solutions, i.e., wired and wireless, 5G transport networks are anticipated to be a heterogeneous, complex, and with stringent performance requirements. To address the aforementioned challenges, wireless backhaul options are providing more attractive solutions, and hence, technologies using the same resources (e.g., frequency channels) may be used by both access and backhaul networks. In this scenario, blurring the separation line between access and backhaul networks allows resource sharing and cooperation between both the networks and minimizes the network deployment and maintenance cost significantly. Therefore, in 5G, the access and backhaul networks cannot be seen as separate entities; rather, we seek to integrate them together to ensure the best use of resources. In this thesis, firstly, we investigate the challenges and potential technologies of 5G transport network. Later, to address these challenges, we identify and present different approaches to perform joint access-backhaul mechanism. An initial performance evaluation of access-aware backhaul optimization is presented, where backhaul network is dynamically assigned with the required resources to serve the dynamic requirements of a 5G access network. The evaluation results and discussions manifest the resource efficiency of joint access-backhaul mechanisms. Functional splits in different layers of the access network comes as an intelligent solution to reduce the enormous capacity requirements of the transport network in a centralized radio access network approach, which tends to centralize almost all the functionalities into a central unit, leaving only radio frequency functions at the access points. From the joint access-backhaul mechanism perspective, we propose a novel technique, which takes the benefit of functional splits at physical layer, to design a heterogeneous transport network in an economical budget-limited and capacity-limited scenario. Till today, the limited capacity of the wireless backhaul links remains a challenge, and hence, frequency spectrum becomes scarce, and requires efficient utilization. To address this challenge, a joint spectrum sharing technique to implement joint accessbackhaul mechanism is presented. Evaluation results show that our proposed joint spectrum sharing technique, where spectrum allocation in the backhaul network follows the access network's traffic load, is fair and efficient in terms of spectrum utilization. We also propose a machine learning technique, which analyses data from a real network and estimates access network's traffic pattern, and subsequently, assigns bandwidth in the access network according to the traffic estimations. Presented evaluation results show that a well-trained machine learning model can be very efficient to obtain an efficient utilization of frequency spectrum.Las primeras generaciones de redes móviles, se implementaron utilizando líneas de cobre o fibra para la conexión entre la red de acceso y el núcleo de la red (conexión backhaul). Más tarde, los enlaces inalámbricos también han funcionado como backhaul mientras que la columna vertebral de la red seguía basada en cable. Sin embargo, debido a los múltiples escenarios de implementación de 5G, una red de backhaul basada solamente en cable ya no es una opción rentable para los operadores. Para una implementación rentable y rápida, las opciones de backhaul inalámbrico son muy atractivas. Como inconvenientes, los enlaces backhaul inalámbricos tienen limitaciones de capacidad y distancia. Para aprovechar las ventajas de ambas soluciones, es decir, cableadas e inalámbricas, se prevé que las redes de transporte 5G sean heterogéneas, complejas y con estrictos requisitos de rendimiento. Para abordar los desafíos antes mencionados, las opciones de backhaul inalámbrico brindan soluciones más atractivas y, por lo tanto, las tecnologías que usan los mismos recursos (por ejemplo, canales de frecuencia) pueden usarse tanto en las redes de acceso como en las de backhaul. En este escenario, desdibujar la línea de separación entre las redes de acceso y backhaul permite el intercambio de recursos y la cooperación entre ambas redes, y minimiza significativamente los costes de implementación y mantenimiento de la red. Por lo tanto, en 5G las redes de acceso y backhaul no pueden verse como entidades separadas; más bien consideraremos su integración para asegurar el mejor uso de los recursos. En esta tesis, en primer lugar, investigamos los desafíos y las tecnologías potenciales para la implementación de la red de backhaul 5G. Más tarde, para abordar dichos desafíos, identificamos diferentes enfoques para un mecanismo conjunto de gestión de la red de acceso y backhaul. Se presenta una evaluación de rendimiento inicial para la optimización de backhaul que tiene en cuenta el estado de la red de acceso, donde la red de backhaul se equipa dinámicamente con los recursos necesarios para cumplir con los requisitos de la red de acceso 5G. Los resultados de la evaluación manifiestan la mayor eficiencia de los mecanismos de gestión de recursos que consideran redes de acceso y backhaul conjuntamente. Las divisiones funcionales en diferentes capas de la red de acceso (functional splits) se presentan como una solución inteligente para reducir los enormes requisitos de capacidad de la red de transporte en un enfoque de red de acceso, que tiende a centralizar casi todas las funcionalidades en una unidad central, dejando solo las funciones más relacionadas con la transmisión/recepción de señales en los puntos de acceso. Desde la perspectiva del mecanismo conjunto de red de acceso y backhaul, proponemos una técnica novedosa, que aprovecha las divisiones funcionales en la capa física para diseñar una red de transporte heterogénea con un presupuesto económico y un escenario de capacidad limitada. Hasta el día de hoy, la capacidad limitada de los enlaces inalámbricos sigue siendo un desafío, dado que el espectro de frecuencias es escaso y requiere una utilización eficiente. Para hacer frente a este desafío, se presenta una técnica de gestión de recursos espectrales compartidos entre red de acceso y backhaul. Los resultados de la evaluación muestran que nuestra propuesta, donde la asignación de espectro en la red de backhaul se hace de acuerdo a la carga de tráfico de la red de acceso, es justa y eficiente. También proponemos una técnica de aprendizaje automático, que analiza datos de una red real y estima el patrón de tráfico de la red de acceso para, posteriormente, asignar ancho de banda en la red de acceso de acuerdo con dichas estimaciones. Los resultados de la evaluación presentados muestran que un modelo de aprendizaje automático bien entrenado puede ser una herramienta muy útil a la hora de obtener una utilización eficiente del espectro de frecuencias.Postprint (published version

Millimetre-Wave Fibre-Wireless Technologies for 5G Mobile Fronthaul

The unprecedented growth in mobile data traffic, driven primarily by bandwidth rich applications and high definition video is accelerating the development of fifth generation (5G) mobile network. As mobile access network evolves towards centralisation, mobile fronthaul (MFH) architecture becomes essential in providing high capacity, ubiquitous and yet affordable services to subscribers. In order to meet the demand for high data rates in the access, Millimetre-wave (mmWave) has been highlighted as an essential technology in the development of 5G-new radio (5G-NR). In the present MFH architecture which is typically based on common public radio interface (CPRI) protocol, baseband signals are digitised before fibre transmission, featuring high overhead data and stringent synchronisation requirements. A direct application of mmWave 5G-NR to CPRI digital MFH, where signal bandwidth is expected to be up to 1GHz will be challenging, due to the increased complexity of the digitising interface and huge overhead data that will be required for such bandwidth. Alternatively, radio over fibre (RoF) technique can be employed in the transportation of mmWave wireless signals via the MFH link, thereby avoiding the expensive digitisation interface and excessive overhead associated with its implementation. Additionally, mmWave carrier can be realised with the aid of photonic components employed in the RoF link, further reducing the system complexity. However, noise and nonlinearities inherent to analog transmission presents implementation challenges, limiting the system dynamic range. Therefore, it is important to investigate the effects of these impairments in RoF based MFH architecture. This thesis presents extensive research on the impact of noise and nonlinearities on 5G candidate waveforms, in mmWave 5G fibre wireless MFH. Besides orthogonal frequency division multiplexing (OFDM), another radio access technology (RAT) that has received significant attention is filter bank multicarrier (FBMC), particularly due to its high spectral containment and excellent performance in asynchronous transmission. Hence, FBMC waveform is adopted in this work to study the impact of noise and nonlinearities on the mmWave fibre-wireless MFH architecture. Since OFDM is widely deployed and it has been adopted for 5G-NR, the performance of OFDM and FBMC based 5G mmWave RAT in fibre wireless MFH architecture is compared for several implementations and transmission scenarios. To this extent, an end to end transmission testbed is designed and implemented using industry standard VPI Transmission Maker® to investigate five mmWave upconversion techniques. Simulation results show that the impact of noise is higher in FBMC when the signal to-noise (SNR) is low, however, FBMC exhibits better performance compared to OFDM as the SNR improved. More importantly, an evaluation of the contribution of each noise component to the overall system SNR is carried out. It is observed in the investigation that noise contribution from the optical carriers employed in the heterodyne upconversion of intermediate frequency (IF) signals to mmWave frequency dominate the system noise. An adaptive modulation technique is employed to optimise the system throughput based on the received SNR. The throughput of FBMC based system reduced significantly compared to OFDM, due to laser phase noise and chromatic dispersion (CD). Additionally, it is shown that by employing frequency domain averaging technique to enhance the channel estimation (CE), the throughput of FBMC is significantly increased and consequently, a comparable performance is obtained for both waveforms. Furthermore, several coexistence scenarios for multi service transmission are studied, considering OFDM and FBMC based RATs to evaluate the impact inter band interference (IBI), due to power amplifier (PA) nonlinearity on the system performance. The low out of band (OOB) emission in FBMC plays an important role in minimising IBI to adjacent services. Therefore, FBMC requires less guardband in coexistence with multiple services in 5G fibre-wireless MFH. Conversely, OFDM introduced significant OOB to adjacent services requiring large guardband in multi-service coexistence transmission scenario. Finally, a novel transmission scheme is proposed and investigated to simultaneously generate multiple mmWave signals using laser heterodyning mmWave upconversion technique. With appropriate IF and optical frequency plan, several mmWave signals can be realised. Simulation results demonstrate successful simultaneous realisation of 28GHz, 38GHz, and 60GHz mmWave signals

Will SDN be part of 5G?

For many, this is no longer a valid question and the case is considered settled with SDN/NFV (Software Defined Networking/Network Function Virtualization) providing the inevitable innovation enablers solving many outstanding management issues regarding 5G. However, given the monumental task of softwarization of radio access network (RAN) while 5G is just around the corner and some companies have started unveiling their 5G equipment already, the concern is very realistic that we may only see some point solutions involving SDN technology instead of a fully SDN-enabled RAN. This survey paper identifies all important obstacles in the way and looks at the state of the art of the relevant solutions. This survey is different from the previous surveys on SDN-based RAN as it focuses on the salient problems and discusses solutions proposed within and outside SDN literature. Our main focus is on fronthaul, backward compatibility, supposedly disruptive nature of SDN deployment, business cases and monetization of SDN related upgrades, latency of general purpose processors (GPP), and additional security vulnerabilities, softwarization brings along to the RAN. We have also provided a summary of the architectural developments in SDN-based RAN landscape as not all work can be covered under the focused issues. This paper provides a comprehensive survey on the state of the art of SDN-based RAN and clearly points out the gaps in the technology.Comment: 33 pages, 10 figure

A Unified Line-of-Sight Probability Model for Commercial 5G Mobile Network Deployments

In this paper we present a novel analytical approach used to derive a new multi-scenario line-of-sight (LOS) probability model for cellular network deployments in the UK. The approach considers the use of lamp post databases as statistically representative geo-spatial data points for evaluation of LOS likelihood from macro cellular base stations. Crucially, the proposed model is built on a high resolution (0.25-1 m) 3D digital surface model underpinned by real network and environmental datasets and validated with supporting field measurements. This work unifies all common cell site classification types; urban, suburban and rural into a single 3D LOS statistical probability model whilst also addressing the influence of endpoint height properties up to 10 m. The contributions outlined in this paper have applications in statistical path loss modelling and coverage/outage probability. They also have direct application in deployment modelling of mmWave (millimeter wave) mobile access networks (24.25-52.6 GHz) and wireless x-haul transport networks (71-174.8 GHz)

A White Paper on Broadband Connectivity in 6G

Executive Summary This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting. Finally, the three levels of enablers must be utilized not only to deliver better broadband services in urban areas, but also to provide full-coverage broadband connectivity must be one of the key outcomes of 6G