System assessment of WUSN using NB-IoT UAV-aided networks in potato crops

Unmanned Aerial Vehicles (UAV) are part of precision agriculture; also, their impact on fast deployable wireless communication is offering new solutions and systems never envisioned before such as collecting information from underground sensors by using low power Internet of Things (IoT) technologies. In this paper, we propose a (Narrow Band IoT) NB-IoT system for collecting underground soil parameters in potato crops using a UAV-aided network. To this end, a simulation tool implementing a gateway mounted on a UAV using NB-IoT based access network and LTE based backhaul network is developed. This tool evaluates the performance of a realistic scenario in a potato field near Bogota, Colombia, accounting for real size packets in a complete IoT application. While computing the wireless link quality, it allocates access and backhaul resources simultaneously based on the technologies used. We compare the performance of wireless underground sensors buried in dry and wet soils at four different depths. Results show that a single drone with 50 seconds of flight time could satisfy more than 2000 sensors deployed in a 20 hectares field, depending on the buried depth and soil characteristics. We found that an optimal flight altitude is located between 60 m and 80 m for buried sensors. Moreover, we establish that the water content reduces the maximum reachable buried depth from 70 cm in dry soils, down to 30 cm in wet ones. Besides, we found that in the proposed scenario, sensors & x2019; battery life could last up to 82 months for above ground sensors and 77 months for the deepest buried ones. Finally, we discuss the influence of the sensor & x2019;s density and buried depth, the flight service time and altitude in power-constrained conditions and we propose optimal configuration to improve system performance

Employing Drones in Agriculture: An Exploration of Various Drone Types and Key Advantages

This article explores the use of drones in agriculture and discusses the various types of drones employed for different agricultural applications. Drones, also known as unmanned aerial vehicles (UAVs), offer numerous advantages in farming practices. They provide real-time and high-resolution data collection, enabling farmers to make informed irrigation, fertilization, and pest management decisions. Drones assist in precision spraying and application of agricultural inputs, minimizing chemical wastage and optimizing resource utilization. They offer accessibility to inaccessible areas, reduce manual labor, and provide cost savings and increased operational efficiency. Drones also play a crucial role in mapping and surveying agricultural fields, aiding crop planning and resource allocation. However, challenges such as regulations and limited flight time need to be addressed. The advantages of using drones in agriculture include precision agriculture, cost and time savings, improved data collection and analysis, enhanced crop management, accessibility and flexibility, environmental sustainability, and increased safety for farmers. Overall, drones have the potential to revolutionize farming practices, leading to increased efficiency, productivity, and sustainability in agriculture.Comment: 5 pages, 8 figure

On the performance of a uav-aided wireless network based on nb-iot

In recent years, interest in Unmanned Aerial Vehicles (UAVs) as a means to provide wireless connectivity has substantially increased thanks to their easy, fast and flexible deployment. Among the several possible applications of UAV networks explored by the current literature, they can be efficiently employed to collect Internet-of-Things (IoT) data because the non-stringent latency and small-size traffic type is particularly suited for UAVs’ inherent characteristics. However, the implications coming from the implementation of existing technology in such kinds of nodes are not straightforward. In this article, we consider a Narrow Band IoT (NB-IoT) network served by a UAV base station. Because of the many configurations possible within the NB-IoT standard, such as the access structure and numerology, we thoroughly review the technical aspects that have to be implemented and may be affected by the proposed UAV-aided IoT network. For proper remarks, we investigate the network performance jointly in terms of the number of successful transmissions, access rate, latency, throughput and energy consumption. Then, we compare the obtained results on different and known trajectories in the research community and study the impact of varying UAV parameters such as speed and height. Moreover, the numerical assessment allows us to extend the discussion to the potential implications of this model in different scenarios. Thus, this article summarizes all the main aspects that must be considered in planning NB-IoT networks with UAVs

Lora technology and its Iot integration in agriculture: a bibliometric analysis

Introducción: El presente artículo es producto de la revisión “Tecnología LoRa y su integración IoT en la agricultura”, desarrollada en la facultad tecnológica de la Universidad Distrital Francisco José de Caldas realizada durante 2019 y 2020. Problema: En la actualidad la agricultura enfrenta desafíos y problemas como el calentamiento global, la escasez de agua y la demanda alimentaria. A causa de dichas dificultades se han venido desarrollando tecnología que facilitan el monitoreo de cultivos y granjas. Objetivo: Resaltar las principales y más importantes características en común entre los artículos revisados, identificar las principales revistas que realizan publicaciones durante los años comprendidos entre 2015 y 2020. Metodología: A partir de esto, se realizó una revisión sistemática en las bases de datos científicas en áreas clave de la agricultura, teniendo en cuenta los artículos publicados entre los años 2015 a 2020. Resultados: Los resultados arrojaron 150 artículos de los cuales sólo 50 cumplieron los criterios de inclusión, Se excluyeron artículos de revisiones, metanálisis y publicaciones en idiomas diferentes al español e inglés. Conclusión: En esta investigación se discute y se analiza los dispositivos más usados dentro de la investigación, módulos LoRa, localizaciones exitosos y beneficios a nivel costos de la implementación de estos sistemas. Originalidad: Mediante la metodología de revisión sistemática y herramientas bibliométricas como bibliometrix R permitieron identificar la información más relevante y los autores más citados. Limitaciones: Existen muy pocos estudios a nivel local que involucran o implementen estas tecnologías.Introduction: This article is the product of the review "LoRa Technology and its IoT integration in agriculture", developed in the technological faculty of the Francisco José de Caldas District University carried out during 2019 and 2020. Problem: Agriculture: now faces dsnophysis and problems such as global warming, water scarcity and food demand. Because of these difficulties, technology has been developed to facilitate the monitoring of crops and farms. Objective: Tohighlight the main and most important characteristics in common amongthe revised articles,identify the main journals that publish during the years between 2015 and 2020. Methodology: From this, a systematic review was carried out in scientific databases in key areas of agriculture,taking into account the articles published between 2015 and 2020. Results: The results yielded 150 articles of which only 50 met the inclusion criteria, Articles of revisions, meta-analysis and publications in languages other than Spanish and English were excluded. Conclusion: This researchis discussed and analyzed the most used devices within research, LoRa modules, successful locations and benefits at the cost level of the implementation of these systems. Originality: Through the systematic review methodology and bibliometric tools such as bibliometrix R they allowed to identify the most relevant information and the most cited authors. Limitations: Existen very few studies at the local level that involve or implement these technologies

A module placement scheme for fog-based smart farming applications

As in Industry 4.0 era, the impact of the internet of things (IoT) on the advancement of the agricultural sector is constantly increasing. IoT enables automation, precision, and efficiency in traditional farming methods, opening up new possibilities for agricultural advancement. Furthermore, many IoT-based smart farming systems are designed based on fog and edge architecture. Fog computing provides computing, storage, and networking services to latency-sensitive applications (such as Agribots-agricultural robots-drones, and IoT-based healthcare monitoring systems), instead of sending data to the cloud. However, due to the limited computing and storage resources of fog nodes used in smart farming, designing a modules placement scheme for resources management is a major challenge for fog based smart farming applications. In this paper, our proposed module placement algorithm aims to achieve efficient resource utilization of fog nodes and reduce application delay and network usage in Fog-based smart farming applications. To evaluate the efficacy of our proposal, the simulation was done using iFogSim. Results show that the proposed approach is able to achieve significant reductions in latency and network usage

Ag-IoT for crop and environment monitoring: Past, present, and future

CONTEXT: Automated monitoring of the soil-plant-atmospheric continuum at a high spatiotemporal resolution is a key to transform the labor-intensive, experience-based decision making to an automatic, data-driven approach in agricultural production. Growers could make better management decisions by leveraging the real-time field data while researchers could utilize these data to answer key scientific questions. Traditionally, data collection in agricultural fields, which largely relies on human labor, can only generate limited numbers of data points with low resolution and accuracy. During the last two decades, crop monitoring has drastically evolved with the advancement of modern sensing technologies. Most importantly, the introduction of IoT (Internet of Things) into crop, soil, and microclimate sensing has transformed crop monitoring into a quantitative and data-driven work from a qualitative and experience-based task. OBJECTIVE: Ag-IoT systems enable a data pipeline for modern agriculture that includes data collection, transmission, storage, visualization, analysis, and decision-making. This review serves as a technical guide for Ag-IoT system design and development for crop, soil, and microclimate monitoring. METHODS: It highlighted Ag-IoT platforms presented in 115 academic publications between 2011 and 2021 worldwide. These publications were analyzed based on the types of sensors and actuators used, main control boards, types of farming, crops observed, communication technologies and protocols, power supplies, and energy storage used in Ag-IoT platforms

Assessment of Smart Mechatronics Applications in Agriculture: A Review

Smart mechatronics systems in agriculture can be traced back to the mid-1980s, when research into automated fruit harvesting systems began in Japan, Europe, and the United States. Impressive advances have been made since then in developing systems for use in modern agriculture. The aim of this study was to review smart mechatronics applications introduced in agriculture to date, and the different areas of the sector in which they are being employed. Various literature search approaches were used to obtain an overview of the current state-of-the-art, benefits, and drawbacks of smart mechatronics systems. Smart mechatronics modules and various networks applied in the processing of agricultural products were examined. Finally, relationships in the data retrieved were tested using a one-way analysis of variance on keywords and sources. The review revealed limited use of sophisticated mechatronics in the agricultural industry in practice at a time of falling production rates and a dramatic decline in the reliability of the global food supply. Smart mechatronics systems could be used in different agricultural enterprises to overcome these issues

Technologies for urban and rural internet of things

Nowadays, application domains such as smart cities, agriculture or intelligent transportation, require communication technologies that combine long transmission ranges and energy efficiency to fulfill a set of capabilities and constraints to rely on. In addition, in recent years, the interest in Unmanned Aerial Vehicles (UAVs) providing wireless connectivity in such scenarios is substantially increased thanks to their flexible deployment. The first chapters of this thesis deal with LoRaWAN and Narrowband-IoT (NB-IoT), which recent trends identify as the most promising Low Power Wide Area Networks technologies. While LoRaWAN is an open protocol that has gained a lot of interest thanks to its simplicity and energy efficiency, NB-IoT has been introduced from 3GPP as a radio access technology for massive machine-type communications inheriting legacy LTE characteristics. This thesis offers an overview of the two, comparing them in terms of selected performance indicators. In particular, LoRaWAN technology is assessed both via simulations and experiments, considering different network architectures and solutions to improve its performance (e.g., a new Adaptive Data Rate algorithm). NB-IoT is then introduced to identify which technology is more suitable depending on the application considered. The second part of the thesis introduces the use of UAVs as flying Base Stations, denoted as Unmanned Aerial Base Stations, (UABSs), which are considered as one of the key pillars of 6G to offer service for a number of applications. To this end, the performance of an NB-IoT network are assessed considering a UABS following predefined trajectories. Then, machine learning algorithms based on reinforcement learning and meta-learning are considered to optimize the trajectory as well as the radio resource management techniques the UABS may rely on in order to provide service considering both static (IoT sensors) and dynamic (vehicles) users. Finally, some experimental projects based on the technologies mentioned so far are presented

Proposal of architecture for IoT solution for monitoring and management of plantations

The world population growth is increasing the demand for food production. Furthermore, the reduction of the workforce in rural areas and the increase in production costs are challenges for food production nowadays. Smart farming is a farm management concept that may use Internet of Things (IoT) to overcome the current challenges of food production This work presents a systematic review of the existing literature on smart farming with IoT. The systematic review reveals an evolution in the way data are processed by IoT solutions in recent years. Traditional approaches mostly used data in a reactive manner. In contrast, recent approaches allowed the use of data to prevent crop problems and to improve the accuracy of crop diagnosis. Based on the finds of the systematic review, this work proposes an architecture of an IoT solution that enables monitoring and management of crops in real time. The proposed architecture allows the usage of big data and machine learning to process the collected data. A prototype is implemented to validate the operation of the proposed architecture and a security risk assessment of the implemented prototype is carried out. The implemented prototype successfully validates the proposed architecture. The architecture presented in this work allows the implementation of IoT solutions in different scenarios of farming, such as indoor and outdoor

IoT Transmission Technologies for Distributed Measurement Systems in Critical Environments

Distributed measurement systems are spread in the most diverse application scenarios, and Internet of Things (IoT) transmission equipment is usually the enabling technologies for such measurement systems that need to feature wireless connectivity to ensure pervasiveness. Because wireless measurement systems have been deployed for the last years even in critical environments, assessing transmission technologies performances in such contexts is fundamental. Indeed, they are the most challenging ones for wireless data transmission due to their intrinsic attenuation capabilities. Several scenarios in which measurement systems can be deployed are analysed. Firstly, marine contexts are treated by considering above-the-sea wireless links. Such setting can be experienced in whichever application requiring remote monitoring of facilities and assets that are offshore installed. Some instances are offshore sea farming plants, or remote video monitoring systems installed on seamark buoys. Secondly, wireless communications taking place from the underground to the aboveground are covered. This scenario is typical of precision agriculture applications, where the accurate measurement of underground physical parameters is needed to be remotely sent to optimise crops reducing the wastefulness of fundamental resources (e.g., irrigation water). Thirdly, wireless communications occurring from the underwater to the abovewater are addressed. Such situation is inevitable for all those infrastructures monitoring conservation status of underwater species like algae, seaweeds and reef. Then, wireless links happening traversing metal surfaces and structures are tackled. Such context is commonly encountered in asset tracking and monitoring (e.g., containers), or in smart metering applications (e.g., utility meters). Lastly, sundry harsh environments that are typical of industrial monitoring (e.g., vibrating machineries, harsh temperature and humidity rooms, corrosive atmospheres) are tested to validate pervasive measurement infrastructures even in such contexts that are usually experienced in Industrial Internet of Things (IIoT) applications. The performances of wireless measurement systems in such scenarios are tested by sorting out ad-hoc measurement campaigns. Finally, IoT measurement infrastructures respectively deployed in above-the-sea and underground-to-aboveground settings are described to provide real applications in which such facilities can be effectively installed. Nonetheless, the aforementioned application scenarios are only some amid their sundry variety. Indeed, nowadays distributed pervasive measurement systems have to be thought in a broad way, resulting in countless instances: predictive maintenance, smart healthcare, smart cities, industrial monitoring, or smart agriculture, etc. This Thesis aims at showing distributed measurement systems in critical environments to set up pervasive monitoring infrastructures that are enabled by IoT transmission technologies. At first, they are presented, and then the harsh environments are introduced, along with the relative theoretical analysis modelling path loss in such conditions. It must be underlined that this Thesis aims neither at finding better path loss models with respect to the existing ones, nor at improving them. Indeed, path loss models are exploited as they are, in order to derive estimates of losses to understand the effectiveness of the deployed infrastructure. In fact, some transmission tests in those contexts are described, along with providing examples of these types of applications in the field, showing the measurement infrastructures and the relative critical environments serving as deployment sites. The scientific relevance of this Thesis is evident since, at the moment, the literature lacks a comparative study like this, showing both transmission performances in critical environments, and the deployment of real IoT distributed wireless measurement systems in such contexts