An adaptive hierarchical sliding mode controller for autonomous underwater vehicles

The paper addresses a problem of efficiently controlling an autonomous underwater vehicle (AUV), where its typical underactuated model is considered. Due to critical uncertainties and nonlinearities in the system caused by unavoidable external disturbances such as ocean currents when it operates, it is paramount to robustly maintain motions of the vehicle over time as expected. Therefore, it is proposed to employ the hierarchical sliding mode control technique to design the closed-loop control scheme for the device. However, exactly determining parameters of the AUV control system is impractical since its nonlinearities and external disturbances can vary those parameters over time. Thus, it is proposed to exploit neural networks to develop an adaptive learning mechanism that allows the system to learn its parameters adaptively. More importantly, stability of the AUV system controlled by the proposed approach is theoretically proved to be guaranteed by the use of the Lyapunov theory. Effectiveness of the proposed control scheme was verified by the experiments implemented in a synthetic environment, where the obtained results are highly promising. © 2021 by the authors. Licensee MDPI, Basel, Switzerland. **Please note that there are multiple authors for this article therefore only the name of the first 5 including Federation University Australia affiliate “Linh Nguyen" is provided in this record*

A novel adaptive PD-type iterative learning control of the PMSM servo system with the friction uncertainty in low speeds

High precision demands in a large number of emerging robotic applications strengthened the role of the modern control laws in the position control of the Permanent Magnet Synchronous Motor (PMSM) servo system. This paper proposes a learning-based adaptive control approach to improve the PMSM position tracking in the presence of the friction uncertainty. In contrast to most of the reported works considering the servos operating at high speeds, this paper focuses on low speeds in which the friction stemmed deteriorations become more obvious. In this paper firstly, a servo model involving the Stribeck friction dynamics is formulated, and the unknown friction parameters are identified by a genetic algorithm from the offline data. Then, a feedforward controller is designed to inject the friction information into the loop and eliminate it before causing performance degradations. Since the friction is a kind of disturbance and leads to uncertainties having time-varying characters, an Adaptive Proportional Derivative (APD) type Iterative Learning Controller (ILC) named as the APD-ILC is designed to mitigate the friction effects. Finally, the proposed control approach is simulated in MATLAB/Simulink environment and it is compared with the conventional Proportional Integral Derivative (PID) controller, Proportional ILC (P-ILC), and Proportional Derivative ILC (PD-ILC) algorithms. The results confirm that the proposed APD-ILC significantly lessens the effects of the friction and thus noticeably improves the control performance in the low speeds of the PMSM

Adaptive Fuzzy Dynamic Surface Sliding Mode Position Control for a Robot Manipulator with Friction and Deadzone

Precise tracking positioning performance in the presence of both the deadzone and friction of a robot manipulator actuator is difficult to achieve by traditional control methodology without proper nonlinear compensation schemes. In this paper, we present a dynamic surface sliding mode control scheme combined with an adaptive fuzzy system, state observer, and parameter estimator to estimate the uncertainty, friction, and deadzone nonlinearities of a robot manipulator system. We design a dynamic surface sliding mode basic controller by systematic recursive design steps that yields several adaptive laws for the compensation of nonlinear friction, deadzone, and other unknown nonlinear dynamics. The boundedness and convergence of this closed-loop system are guaranteed by the Lyapunov stability theorem. Experiments on the Scorbot robot manipulator demonstrate the validity and effectiveness of the proposed control scheme

Adaptive backstepping controller design of quadrotor biplane for payload delivery

Performance of the UAVs for a particular application can be enhanced by hybrid design, where take-off, hover, and landing happen like rotary-wing UAVs, and flies like fixed-wing UAVs. A backstepping controller and an adaptive backstepping controller are designed for trajectory tracking and payload delivery in a medical emergency or medical substance delivery like vaccine delivery in the presence of wind gust. Simulation results show that the backstepping controller effectively tracks the trajectory during the entire flight envelope, including take-off, hovering, the transition phase, level flight mode, and landing. A comparison between Backstepping, Integral Terminal Sliding Mode (ITSMC) and Adaptive Backstepping controllers for payload delivery show that the adaptive backstepping controller effectively tracks the altitude and attitude. ITSMC is capable of tracking the desired trajectory for a change in the mass but has sluggish response. The backstepping controller generates a steady-state error in altitude during the mass change in biplane-quadrotor.The publication of this article was funded by Qatar National Library.Scopu