Some recent asynchronous system design methodologies

Journal ArticleWe present an in-depth study of some techniques for asynchronous system design, analysis, and verification. After defining basic terminology, we take one simple example - a four-phase t o two-phase converter - and present its design using (a) classical flow-tables; (b) Signal Transition Graphs of [8]; and (c) Trace Theory of [15]. We then present necessary and sufficient conditions for Delay Insensitivity, proposed by [38], and illustrate it on our example. Finally, we present the work of [13] on the verification of asynchronous circuits, and illustrate it on the circuits derived in the paper. The following points are emphasized: (i) presentation of techniques at more depth than in a general survey; (ii) illustration of all t h e aspects discussed on a common example; (hi) comparative study of the works presented. Many interesting works had to be left out, solely because of our lack of space and time

CAD directions for high performance asynchronous circuits

Journal ArticleThis paper describes a novel methodology for high performance asynchronous design based on timed circuits and on CAD support for their synthesis using Relative Timing. This methodology was developed for a prototype iA32 instruction length decoding and steering unit called RAPPID ("Revolving Asynchronous Pentium® Processor Instruction Decoder") that was fabricated and tested successfully. Silicon results show significant advantages - in particular, performance of 2.5-4.5 instructions per nS - with manageable risks using this design technology. RAPPID achieves three times faster performa the power and requiring a minor area penalty as a comparable 400MHz clocked circuit. Relative Timing is based on user-defined and automatically extracted relative tinning assumptions between signal transitions in a circuit and its environment. It supports the specification, synthesis, and verification of high-performance asynchronous circuits, such as pulse-mode circuits, that can be derived from an initial speed-independent specification. Relative timing presents a "middle-ground" between clocked and asynchronous circuits, and is a fertile area for CAD development. We discuss possible directions for future CAD development

A correctness criterion for asynchronous circuit validation and optimization

technical reportWe propose a new relation C. called strong conformance in the context of Dill's trace theory, and define B Q A to be true exactly when B conforms to A and the success set of B contains the success set of A. When B C. A, module B operated in module A's maximal environment AM (i.e. B || AM) exhibits all the traces that A \\ AM exhibits. In addition, if A has a success trace x, B can have additional success traces of the form xi?* where i is an input and a is the alphabet of the trace structure. This means that B can have additional capabilities that A does not. We show that strong conformance is more useful than conformance (defined by Dill) in detecting certain errors in asynchronous circuits. Strong conformance also helps justify circuit optimization rules that replace a component A by another component B that may have extra capabilities (e.g. can accept more inputs). The structural operators compose, rename, and hide of Dill's trace theory are monotonic with respect to strong conformance. Experiments using a modified version of Dill's trace theory verifier are presented

Shuttle wave experiments

Wave experiments on shuttle are needed to verify dispersion relations, to study nonlinear and exotic phenomena, to support other plasma experiments, and to test engineering designs. Techniques based on coherent detection and bistatic geometry are described. New instrumentation required to provide modules for a variety of missions and to incorporate advanced signal processing and control techniques is discussed. An experiment for Z to 0 coupling is included

Formal methods and tools for the development of distributed and real time systems : Esprit Project 3096 (SPEC)

The Basic Research Action No. 3096, Formal Methods snd Tools for the Development of Distributed and Real Time Systems, is funded in the Area of Computer Science, under the ESPRIT Programme of the European Community. The coordinating institution is the Department of Computing Science, Eindhoven University of Technology, and the participating Institutions are the Institute of Computer Science of Crete. the Swedish Institute of Computer Science, the Programmimg Research Group of the University of Oxford, and the Computer Science Departments of the University of Manchester, Imperial College. Weizmann Institute of Science, Eindhoven University of Technology, IMAG Grenoble. Catholic University of Nijmegen, and the University of Liege. This document contains the synopsis. and part of the sections on objectives and area of advance, on baseline and rationale, on research goals, and on organisation of the action, as contained in the original proposal, submitted June, 198S. The section on the state of the art (18 pages) and the full list of references (21 pages) of the original proposal have been deleted because of limitation of available space

Verification of timed circuits with failure directed abstractions

Journal ArticleThis paper presents a method to address state explosion in timed circuit verification by using abstraction directed by the failure model. This method allows us to decompose the verification problem into a set of subproblems, each of which proves that a specific failure condition does not occur. To each subproblem, abstraction is applied using safe transformations to reduce the complexity of verification. The abstraction preserves all essential behaviors conservatively for the specific failure model in the concrete description. Therefore, no violations of the given failure model are missed when only the abstract description is analyzed. An algorithm is also shown to examine the abstract error trace to either find a concrete error trace or report that it is a false negative. This paper presents results using the proposed failure directed abstractions as applied to two large timed circuit designs

GRL: A Specification Language for Globally Asynchronous Locally Synchronous Systems

International audienceA GALS (Globally Asynchronous, Locally Synchronous) system consists of several synchronous subsystems that evolve concurrently and interact with each other asynchronously. Most formalisms and design tools support either the synchronous paradigm or the asynchronous paradigm but rarely combine both, which requires an intricate modeling of GALS systems. In this paper, we present a new language, called GRL (GALS Representation Language) designed to model GALS systems in an abstract and versatile manner for the purpose of formal verification. GRL has formal semantics combining the synchronous reactive model underlying dataflow languages and the asynchronous concurrent model underlying process algebras. We present the basic concepts and the main constructs of the language, together with an illustrative example

Doctor of Philosophy

dissertationAsynchronous design has a very promising potential even though it has largely received a cold reception from industry. Part of this reluctance has been due to the necessity of custom design languages and computer aided design (CAD) flows to design, optimize, and validate asynchronous modules and systems. Next generation asynchronous flows should support modern programming languages (e.g., Verilog) and application specific integrated circuits (ASIC) CAD tools. They also have to support multifrequency designs with mixed synchronous (clocked) and asynchronous (unclocked) designs. This work presents a novel relative timing (RT) based methodology for generating multifrequency designs using synchronous CAD tools and flows. Synchronous CAD tools must be constrained for them to work with asynchronous circuits. Identification of these constraints and characterization flow to automatically derive the constraints is presented. The effect of the constraints on the designs and the way they are handled by the synchronous CAD tools are analyzed and reported in this work. The automation of the generation of asynchronous design templates and also the constraint generation is an important problem. Algorithms for automation of reset addition to asynchronous circuits and power and/or performance optimizations applied to the circuits using logical effort are explored thus filling an important hole in the automation flow. Constraints representing cyclic asynchronous circuits as directed acyclic graphs (DAGs) to the CAD tools is necessary for applying synchronous CAD optimizations like sizing, path delay optimizations and also using static timing analysis (STA) on these circuits. A thorough investigation for the requirements of cycle cutting while preserving timing paths is presented with an algorithm to automate the process of generating them. A large set of designs for 4 phase handshake protocol circuit implementations with early and late data validity are characterized for area, power and performance. Benchmark circuits with automated scripts to generate various configurations for better understanding of the designs are proposed and analyzed. Extension to the methodology like addition of scan insertion using automatic test pattern generation (ATPG) tools to add testability of datapath in bundled data asynchronous circuit implementations and timing closure approaches are also described. Energy, area, and performance of purely asynchronous circuits and circuits with mixed synchronous and asynchronous blocks are explored. Results indicate the benefits that can be derived by generating circuits with asynchronous components using this methodology