Digital Centric Multi-Gigabit SerDes Design and Verification

Advances in semiconductor manufacturing still lead to ever decreasing feature sizes and constantly allow higher degrees of integration in application specific integrated circuits (ASICs). Therefore the bandwidth requirements on the external interfaces of such systems on chips (SoC) are steadily growing. Yet, as the number of pins on these ASICs is not increasing in the same pace - known as pin limitation - the bandwidth per pin has to be increased. SerDes (Serializer/Deserializer) technology, which allows to transfer data serially at very high data rates of 25Gbps and more is a key technology to overcome pin limitation and exploit the computing power that can be achieved in todays SoCs. As such SerDes blocks together with the digital logic interfacing them form complex mixed signal systems, verification of performance and functional correctness is very challenging. In this thesis a novel mixed-signal design methodology is proposed, which tightly couples model and implementation in order to ensure consistency throughout the design cycles and hereby accelerate the overall implementation flow. A tool flow that has been developed is presented, which integrates well into state of the art electronic design automation (EDA) environments and enables the usage of this methodology in practice. Further, the design space of todays high-speed serial links is analyzed and an architecture is proposed, which pushes complexity into the digital domain in order to achieve robustness, portability between manufacturing processes and scaling with advanced node technologies. The all digital phase locked loop (PLL) and clock data recovery (CDR), which have been developed are described in detail. The developed design flow was used for the implementation of the SerDes architecture in a 28nm silicon process and proved to be indispensable for future projects

Architectural Exploration of KeyRing Self-Timed Processors

RÉSUMÉ Les dernières décennies ont vu l’augmentation des performances des processeurs contraintes par les limites imposées par la consommation d’énergie des systèmes électroniques : des très basses consommations requises pour les objets connectés, aux budgets de dépenses électriques des serveurs, en passant par les limitations thermiques et la durée de vie des batteries des appareils mobiles. Cette forte demande en processeurs efficients en énergie, couplée avec les limitations de la réduction d’échelle des transistors—qui ne permet plus d’améliorer les performances à densité de puissance constante—, conduit les concepteurs de circuits intégrés à explorer de nouvelles microarchitectures permettant d’obtenir de meilleures performances pour un budget énergétique donné. Cette thèse s’inscrit dans cette tendance en proposant une nouvelle microarchitecture de processeur, appelée KeyRing, conçue avec l’intention de réduire la consommation d’énergie des processeurs. La fréquence d’opération des transistors dans les circuits intégrés est proportionnelle à leur consommation dynamique d’énergie. Par conséquent, les techniques de conception permettant de réduire dynamiquement le nombre de transistors en opération sont très largement adoptées pour améliorer l’efficience énergétique des processeurs. La technique de clock-gating est particulièrement usitée dans les circuits synchrones, car elle réduit l’impact de l’horloge globale, qui est la principale source d’activité. La microarchitecture KeyRing présentée dans cette thèse utilise une méthode de synchronisation décentralisée et asynchrone pour réduire l’activité des circuits. Elle est dérivée du processeur AnARM, un processeur développé par Octasic sur la base d’une microarchitecture asynchrone ad hoc. Bien qu’il soit plus efficient en énergie que des alternatives synchrones, le AnARM est essentiellement incompatible avec les méthodes de synthèse et d’analyse temporelle statique standards. De plus, sa technique de conception ad hoc ne s’inscrit que partiellement dans les paradigmes de conceptions asynchrones. Cette thèse propose une approche rigoureuse pour définir les principes généraux de cette technique de conception ad hoc, en faisant levier sur la littérature asynchrone. La microarchitecture KeyRing qui en résulte est développée en association avec une méthode de conception automatisée, qui permet de s’affranchir des incompatibilités natives existant entre les outils de conception et les systèmes asynchrones. La méthode proposée permet de pleinement mettre à profit les flots de conception standards de l’industrie microélectronique pour réaliser la synthèse et la vérification des circuits KeyRing. Cette thèse propose également des protocoles expérimentaux, dont le but est de renforcer la relation de causalité entre la microarchitecture KeyRing et une réduction de la consommation énergétique des processeurs, comparativement à des alternatives synchrones équivalentes.----------ABSTRACT Over the last years, microprocessors have had to increase their performances while keeping their power envelope within tight bounds, as dictated by the needs of various markets: from the ultra-low power requirements of the IoT, to the electrical power consumption budget in enterprise servers, by way of passive cooling and day-long battery life in mobile devices. This high demand for power-efficient processors, coupled with the limitations of technology scaling—which no longer provides improved performances at constant power densities—, is leading designers to explore new microarchitectures with the goal of pulling more performances out of a fixed power budget. This work enters into this trend by proposing a new processor microarchitecture, called KeyRing, having a low-power design intent. The switching activity of integrated circuits—i.e. transistors switching on and off—directly affects their dynamic power consumption. Circuit-level design techniques such as clock-gating are widely adopted as they dramatically reduce the impact of the global clock in synchronous circuits, which constitutes the main source of switching activity. The KeyRing microarchitecture presented in this work uses an asynchronous clocking scheme that relies on decentralized synchronization mechanisms to reduce the switching activity of circuits. It is derived from the AnARM, a power-efficient ARM processor developed by Octasic using an ad hoc asynchronous microarchitecture. Although it delivers better power-efficiency than synchronous alternatives, it is for the most part incompatible with standard timing-driven synthesis and Static Timing Analysis (STA). In addition, its design style does not fit well within the existing asynchronous design paradigms. This work lays the foundations for a more rigorous definition of this rather unorthodox design style, using circuits and methods coming from the asynchronous literature. The resulting KeyRing microarchitecture is developed in combination with Electronic Design Automation (EDA) methods that alleviate incompatibility issues related to ad hoc clocking, enabling timing-driven optimizations and verifications of KeyRing circuits using industry-standard design flows. In addition to bridging the gap with standard design practices, this work also proposes comprehensive experimental protocols that aims to strengthen the causal relation between the reported asynchronous microarchitecture and a reduced power consumption compared with synchronous alternatives. The main achievement of this work is a framework that enables the architectural exploration of circuits using the KeyRing microarchitecture

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

Asynchronous design of a multi-dimensional logarithmic number system processor for digital hearing instruments.

This thesis presents an asynchronous Multi-Dimensional Logarithmic Number System (MDLNS) processor that exhibits very low power dissipation. The target application is for a hearing instrument DSP. The MDLNS is a newly developed number system that has the advantage of reducing hardware complexity compared to the classical Logarithmic Number System (LNS). A synchronous implementation of a 2-digit 2DLNS filterbank, using the MDLNS to construct a FIR filterbank, has successfully proved that this novel number representation can benefit this digital hearing instrument application in the requirement of small size and low power. In this thesis we demonstrate that the combination of using the MDLNS, along with an asynchronous design methodology, produces impressive power savings compared to the previous synchronous design. A 4-phase bundled-data full-handshaking protocol is applied to the asynchronous control design. We adopt the Differential Cascade Voltage Switch Logic (DCVSL) circuit family for the design of the computation cells in this asynchronous MDLNS processor. Besides the asynchronous design methodology, we also use finite ring calculations to reduce adder bit-width to provide improvements compared to the previous MDLNS filterbank architecture. Spectre power simulation results from simulations of this asynchronous MDLNS processor demonstrate that over 70 percent power savings have been achieved compared to the synchronous design. This full-custom asynchronous MDLNS processor has been submitted for fabrication in the TSMC 0.18mum CMOS technology. A further contribution in this thesis is the development of a novel synchronizing method of design for testability (DfT), which is offered as a possible solution for asynchronous DfT methods.Dept. of Electrical and Computer Engineering. Paper copy at Leddy Library: Theses & Major Papers - Basement, West Bldg. / Call Number: Thesis2004 .W85. Source: Masters Abstracts International, Volume: 43-01, page: 0288. Advisers: G. A. Jullien; W. C. Miller. Thesis (M.A.Sc.)--University of Windsor (Canada), 2004

Design and Validation of Network-on-Chip Architectures for the Next Generation of Multi-synchronous, Reliable, and Reconfigurable Embedded Systems

NETWORK-ON-CHIP (NoC) design is today at a crossroad. On one hand, the design principles to efficiently implement interconnection networks in the resource-constrained on-chip setting have stabilized. On the other hand, the requirements on embedded system design are far from stabilizing. Embedded systems are composed by assembling together heterogeneous components featuring differentiated operating speeds and ad-hoc counter measures must be adopted to bridge frequency domains. Moreover, an unmistakable trend toward enhanced reconfigurability is clearly underway due to the increasing complexity of applications. At the same time, the technology effect is manyfold since it provides unprecedented levels of system integration but it also brings new severe constraints to the forefront: power budget restrictions, overheating concerns, circuit delay and power variability, permanent fault, increased probability of transient faults. Supporting different degrees of reconfigurability and flexibility in the parallel hardware platform cannot be however achieved with the incremental evolution of current design techniques, but requires a disruptive approach and a major increase in complexity. In addition, new reliability challenges cannot be solved by using traditional fault tolerance techniques alone but the reliability approach must be also part of the overall reconfiguration methodology. In this thesis we take on the challenge of engineering a NoC architectures for the next generation systems and we provide design methods able to overcome the conventional way of implementing multi-synchronous, reliable and reconfigurable NoC. Our analysis is not only limited to research novel approaches to the specific challenges of the NoC architecture but we also co-design the solutions in a single integrated framework. Interdependencies between different NoC features are detected ahead of time and we finally avoid the engineering of highly optimized solutions to specific problems that however coexist inefficiently together in the final NoC architecture. To conclude, a silicon implementation by means of a testchip tape-out and a prototype on a FPGA board validate the feasibility and effectivenes

NASA SERC 1990 Symposium on VLSI Design

This document contains papers presented at the first annual NASA Symposium on VLSI Design. NASA's involvement in this event demonstrates a need for research and development in high performance computing. High performance computing addresses problems faced by the scientific and industrial communities. High performance computing is needed in: (1) real-time manipulation of large data sets; (2) advanced systems control of spacecraft; (3) digital data transmission, error correction, and image compression; and (4) expert system control of spacecraft. Clearly, a valuable technology in meeting these needs is Very Large Scale Integration (VLSI). This conference addresses the following issues in VLSI design: (1) system architectures; (2) electronics; (3) algorithms; and (4) CAD tools