Optimization of DSSS Receivers Using Hardware-in-the-Loop Simulations

Over the years, there has been significant interest in defining a hardware abstraction layer to facilitate code reuse in software defined radio (SDR) applications. Designers are looking for a way to enable application software to specify a waveform, configure the platform, and control digital signal processing (DSP) functions in a hardware platform in a way that insulates it from the details of realization. This thesis presents a tool-based methodolgy for developing and optimizing a Direct Sequence Spread Spectrum (DSSS) transceiver deployed in custom hardware like Field Programmble Gate Arrays (FPGAs). The system model consists of a tranmitter which employs a quadrature phase shift keying (QPSK) modulation scheme, an additive white Gaussian noise (AWGN) channel, and a receiver whose main parts consist of an analog-to-digital converter (ADC), digital down converter (DDC), image rejection low-pass filter (LPF), carrier phase locked loop (PLL), tracking locked loop, down-sampler, spread spectrum correlators, and rectangular-to-polar converter. The design methodology is based on a new programming model for FPGAs developed in the industry by Xilinx Inc. The Xilinx System Generator for DSP software tool provides design portability and streamlines system development by enabling engineers to create and validate a system model in Xilinx FPGAs. By providing hierarchical modeling and automatic HDL code generation for programmable devices, designs can be easily verified through hardware-in-the-loop (HIL) simulations. HIL provides a significant increase in simulation speed which allows optimization of the receiver design with respect to the datapath size for different functional parts of the receiver. The parameterized datapath points used in the simulation are ADC resolution, DDC datapath size, LPF datapath size, correlator height, correlator datapath size, and rectangular-to-polar datapath size. These parameters are changed in the software enviornment and tested for bit error rate (BER) performance through real-time hardware simualtions. The final result presents a system design with minimum harware area occupancy relative to an acceptable BER degradation

Embedded electronic systems driven by run-time reconfigurable hardware

Abstract This doctoral thesis addresses the design of embedded electronic systems based on run-time reconfigurable hardware technology –available through SRAM-based FPGA/SoC devices– aimed at contributing to enhance the life quality of the human beings. This work does research on the conception of the system architecture and the reconfiguration engine that provides to the FPGA the capability of dynamic partial reconfiguration in order to synthesize, by means of hardware/software co-design, a given application partitioned in processing tasks which are multiplexed in time and space, optimizing thus its physical implementation –silicon area, processing time, complexity, flexibility, functional density, cost and power consumption– in comparison with other alternatives based on static hardware (MCU, DSP, GPU, ASSP, ASIC, etc.). The design flow of such technology is evaluated through the prototyping of several engineering applications (control systems, mathematical coprocessors, complex image processors, etc.), showing a high enough level of maturity for its exploitation in the industry.Resumen Esta tesis doctoral abarca el diseño de sistemas electrónicos embebidos basados en tecnología hardware dinámicamente reconfigurable –disponible a través de dispositivos lógicos programables SRAM FPGA/SoC– que contribuyan a la mejora de la calidad de vida de la sociedad. Se investiga la arquitectura del sistema y del motor de reconfiguración que proporcione a la FPGA la capacidad de reconfiguración dinámica parcial de sus recursos programables, con objeto de sintetizar, mediante codiseño hardware/software, una determinada aplicación particionada en tareas multiplexadas en tiempo y en espacio, optimizando así su implementación física –área de silicio, tiempo de procesado, complejidad, flexibilidad, densidad funcional, coste y potencia disipada– comparada con otras alternativas basadas en hardware estático (MCU, DSP, GPU, ASSP, ASIC, etc.). Se evalúa el flujo de diseño de dicha tecnología a través del prototipado de varias aplicaciones de ingeniería (sistemas de control, coprocesadores aritméticos, procesadores de imagen, etc.), evidenciando un nivel de madurez viable ya para su explotación en la industria.Resum Aquesta tesi doctoral està orientada al disseny de sistemes electrònics empotrats basats en tecnologia hardware dinàmicament reconfigurable –disponible mitjançant dispositius lògics programables SRAM FPGA/SoC– que contribueixin a la millora de la qualitat de vida de la societat. S’investiga l’arquitectura del sistema i del motor de reconfiguració que proporcioni a la FPGA la capacitat de reconfiguració dinàmica parcial dels seus recursos programables, amb l’objectiu de sintetitzar, mitjançant codisseny hardware/software, una determinada aplicació particionada en tasques multiplexades en temps i en espai, optimizant així la seva implementació física –àrea de silici, temps de processat, complexitat, flexibilitat, densitat funcional, cost i potència dissipada– comparada amb altres alternatives basades en hardware estàtic (MCU, DSP, GPU, ASSP, ASIC, etc.). S’evalúa el fluxe de disseny d’aquesta tecnologia a través del prototipat de varies aplicacions d’enginyeria (sistemes de control, coprocessadors aritmètics, processadors d’imatge, etc.), demostrant un nivell de maduresa viable ja per a la seva explotació a la indústria

Digital signal processing and digital-to-analog converters for wide-band transmitters

In this thesis, the implementation methods of digital signal processing and digital-to-analog converters for wide-band transmitters are researched. With digital signal processing, the problems of analog signal processing, such as sensitivity to interference and nonidealities of the semiconductor processes, can be avoided. Also, the programmability can be implemented digitally more easily than by means of analog signal processing. During the past few years, wireless communications has evolved from analog to digital, and signal bandwidths have increased, enabling faster and faster data transmission. The evolution of semiconductor processes, decreasing linewidth and supply voltages, has decreased the size of the electronics and power dissipation, enabling the integration of larger and larger systems on single silicon chips. There is little overall benefit in decreasing linewidths to meet the needs of analog design, since it makes the design process more difficult as the device sizes cannot be scaled according to minimum linewidth and because of the decreasing supply voltage. On the other hand, the challenges of digital signal processing are related to the efficient realization of signal processing algorithms in such a way that the required area and power dissipation does not increase extensively. In this book, the problems related to digital filters, upconversion algorithms and digital-to-analog converters used in digital transmitters are researched. Research results are applied to the implementation of a transmitter for a third-generation WCDMA base-station. In addition, the theory of factors affecting the linearity and performance of digital-to-analog converters is researched, and a digital calibration algorithm for enhancement of the static linearity has been presented. The algorithm has been implemented together with a 16-bit converter; its functionality has been demonstrated with measurements.Tässä väitöskirjassa on tutkittu digitaalisen signaalinkäsittelyn toteuttamista ja digitaalisesta analogiseksi -muuntimia laajakaistaisiin lähettimiin. Digitaalisella signaalinkäsittelyllä voidaan välttää monia analogiseen signaalinkäsittelyyn liittyviä ongelmia, kuten häiriöherkkyyttä ja puolijohdeprosessien epäideaalisuuksien vaikutuksia. Myös ohjelmoitavuus on helpommin toteutettavissa digitaalisesti kuin analogisen signaalinkäsittelyn keinoin. Viime vuosina on langattomien tietoliikennejärjestelmien kehitys kulkenut analogisesta digitaaliseen, ja käytettävät signaalikaistanleveydet ovat kasvaneet mahdollistaen yhä nopeamman tiedonsiirron. Puolijohdeprosessien kehitys, kapeneva minimiviivanleveys ja pienemmät käyttöjännitteet, on pienentänyt elektroniikan kokoa ja tehonkulutusta mahdollistaen yhä suurempien kokonaisuuksien integroimisen yhdelle piisirulle. Viivanleveyksien pieneneminen ei kuitenkaan suoraan hyödytä analogiasuunnittelua, jossa piirielementtien kokoa ei välttämättä voida pienentää viivanleveyden pienentyessä, ja jossa madaltuva käyttöjännite ennemminkin hankaloittaa kuin helpottaa suunnittelua. Siksi yhä suurempi osa signaalinkäsittelystä pyritään tekemään digitaalisesti. Digitaalisen signaalinkäsittelyn ongelmat puolestaan liittyvät algoritmien tehokkaaseen toteuttamiseen siten, että piirien pinta-ala ja tehonkulutus eivät kasva liian suuriksi. Tässä kirjassa on tutkittu digitaalisessa lähettimessä tarvittavien digitaalisten suodattimien, ylössekoitusalgoritmien ja digitaalisesta analogiseksi -muuntimien toteuttamiseen liittyviä ongelmia. Tutkimustuloksia on sovellettu kolmannen sukupolven WCDMA-tukiasemalähettimen toteutuksessa. Lisäksi on tutkittu digitaalisesta analogiseksi -muuntimien lineaarisuuteen ja suorituskykyyn vaikuttavien seikkojen teoriaa, ja esitetty digitaalinen kalibrointialgoritmi muuntimen staattisen suorituskyvyn parantamiseksi. Algoritmi on toteutettu 16-bittisen muuntimen yhteydessä ja se on osoitettu toimivaksi mittauksin.reviewe

Network-on-Chip

Addresses the Challenges Associated with System-on-Chip Integration Network-on-Chip: The Next Generation of System-on-Chip Integration examines the current issues restricting chip-on-chip communication efficiency, and explores Network-on-chip (NoC), a promising alternative that equips designers with the capability to produce a scalable, reusable, and high-performance communication backbone by allowing for the integration of a large number of cores on a single system-on-chip (SoC). This book provides a basic overview of topics associated with NoC-based design: communication infrastructure design, communication methodology, evaluation framework, and mapping of applications onto NoC. It details the design and evaluation of different proposed NoC structures, low-power techniques, signal integrity and reliability issues, application mapping, testing, and future trends. Utilizing examples of chips that have been implemented in industry and academia, this text presents the full architectural design of components verified through implementation in industrial CAD tools. It describes NoC research and developments, incorporates theoretical proofs strengthening the analysis procedures, and includes algorithms used in NoC design and synthesis. In addition, it considers other upcoming NoC issues, such as low-power NoC design, signal integrity issues, NoC testing, reconfiguration, synthesis, and 3-D NoC design. This text comprises 12 chapters and covers: The evolution of NoC from SoC—its research and developmental challenges NoC protocols, elaborating flow control, available network topologies, routing mechanisms, fault tolerance, quality-of-service support, and the design of network interfaces The router design strategies followed in NoCs The evaluation mechanism of NoC architectures The application mapping strategies followed in NoCs Low-power design techniques specifically followed in NoCs The signal integrity and reliability issues of NoC The details of NoC testing strategies reported so far The problem of synthesizing application-specific NoCs Reconfigurable NoC design issues Direction of future research and development in the field of NoC Network-on-Chip: The Next Generation of System-on-Chip Integration covers the basic topics, technology, and future trends relevant to NoC-based design, and can be used by engineers, students, and researchers and other industry professionals interested in computer architecture, embedded systems, and parallel/distributed systems

Low Power Memory/Memristor Devices and Systems

This reprint focusses on achieving low-power computation using memristive devices. The topic was designed as a convenient reference point: it contains a mix of techniques starting from the fundamental manufacturing of memristive devices all the way to applications such as physically unclonable functions, and also covers perspectives on, e.g., in-memory computing, which is inextricably linked with emerging memory devices such as memristors. Finally, the reprint contains a few articles representing how other communities (from typical CMOS design to photonics) are fighting on their own fronts in the quest towards low-power computation, as a comparison with the memristor literature. We hope that readers will enjoy discovering the articles within

Heterogeneous Chip Multiprocessor: Data Representation, Mixed-Signal Processing Tiles, and System Design

With the emergence of big data, the need for more computationally intensive processors that can handle the increased processing demand has risen. Conventional computing paradigms based on the Von Neumann model that separates computational and memory structures have become outdated and less efficient for this increased demand. As the speed and memory density of processors have increased significantly over the years, these models of computing, which rely on a constant stream of data between the processor and memory, see less gains due to finite bandwidth and latency. Moreover, in the presence of extreme scaling, these conventional systems, implemented in submicron integrated circuits, have become even more susceptible to process variability, static leakage current, and more. In this work, alternative paradigms, predicated on distributive processing with robust data representation and mixed-signal processing tiles, are explored for constructing more efficient and scalable computing systems in application specific integrated circuits (ASICs). The focus of this dissertation work has been on heterogeneous chip multi-processor (CMP) design and optimization across different levels of abstraction. On the level of data representation, a different modality of representation based on random pulse density modulation (RPDM) coding is explored for more efficient processing using stochastic computation. On the level of circuit description, mixed-signal integrated circuits that exploit charge-based computing for energy efficient fixed point arithmetic are designed. Consequently, 8 different chips that test and showcase these circuits were fabricated in submicron CMOS processes. Finally, on the architectural level of description, a compact instruction-set processor and controller that facilitates distributive computing on System-On-Chips (SoCs) is designed. In addition to this, a robust bufferless network architecture is designed with a network simulator, and I/O cells are designed for SoCs. The culmination of this thesis work has led to the design and fabrication of a heterogeneous chip multi- processor prototype comprised of over 12,000 VVM cores, warp/dewarp processors, cache, and additional processors, which can be applied towards energy efficient large-scale data processing

Computer-Aided Design of Switched-Capacitor Filters

This thesis describes a series of computer methods for the design of switched-capacitor filters. Current software is greatly restricted in the types of transfer function that can be designed and in the range of filter structures by which they can be implemented. To solve the former problem, several new filter approximation algorithms are derived from Newton's method, yielding the Remez algortithm as a special case (confirming its convergency properties). Amplitude responses with arbitrary passband shaping and stopband notch positions are computed. Points of a specified degree of tangency to attenuation boundaries (touch points) can be placed in the response, whereby a family of transfer functions between Butterworth and elliptic can be derived, offering a continuous trade-off in group delay and passive sensitivity properties. The approximation algorithms have also been applied to arbitrary group delay correction by all-pass functions. Touch points form a direct link to an iterative passive ladder design method, which bypasses the need for Hurwitz factorisation. The combination of iterative and classical synthesis methods is suggested as the best compromise between accuracy and speed. It is shown that passive ladder prototypes of a minimum-node form can be efficiently simulated by SC networks without additional op-amps. A special technique is introduced for canonic realisation of SC ladder networks from transfer functions with finite transmission at high frequency, solving instability and synthesis difficulties. SC ladder structures are further simplified by synthesising the zeros at +/-2fs which are introduced into the transfer function by bilinear transformation. They cause cancellation of feedthrough branches and yield simplified LDI-type SC filter structures, although based solely on the bilinear transform. Matrix methods are used to design the SC filter simulations. They are shown to be a very convenient and flexible vehicle for computer processing of the linear equations involved in analogue filter design. A wide variety of filter structures can be expressed in a unified form. Scaling and analysis can readily be performed on the system matrices with great efficiency. Finally, the techniques are assembled in a filter compiler for SC filters called PANDDA. The application of the above techniques to practical design problems is then examined. Exact correction of sinc(x), LDI termination error, pre-filter and local loop telephone line weightings are illustrated. An optimisation algorithm is described, which uses the arbitrary passband weighting to predistort the transfer function for response distortions. Compensation of finite amplifier gain-bandwidth and switch resistance effects in SC filters is demonstrated. Two commercial filter specifications which pose major difficulties for traditional design methods are chosen as examples to illustrate PANDDA's full capabilities. Significant reductions in order and total area are achieved. Finally, test results of several SC filters designed using PANDDA for a dual-channel speech-processing ASIC are presented. The speed with which high-quality, standard SC filters can be produced is thus proven

The Fifth NASA Symposium on VLSI Design

The fifth annual NASA Symposium on VLSI Design had 13 sessions including Radiation Effects, Architectures, Mixed Signal, Design Techniques, Fault Testing, Synthesis, Signal Processing, and other Featured Presentations. The symposium provides insights into developments in VLSI and digital systems which can be used to increase data systems performance. The presentations share insights into next generation advances that will serve as a basis for future VLSI design