Advances in Decentralized Single-Beacon Acoustic Navigation for Underwater Vehicles: Theory and Simulation

This paper reports the theory and implementation of a decentralized navigation system that enables simultaneous single-beacon navigation of multiple underwater vehicles. In single-beacon navigation, each vehicle uses ranges from a single, moving reference beacon in addition to its own inertial navigation sensors to perform absolute localization and navigation. In this implementation the vehicles perform simultaneous communication and navigation using underwater acoustic modems, encoding and decoding data within the acoustic broadcast. Vehicles calculate range from the time of flight of asynchronous acoustic broadcasts from the reference beacon. Synchronous clocks on the reference beacon and the vehicles enable the measurement of one-way travel-times, whereby the time of launch of the acoustic signal at the reference beacon is encoded in the acoustic broadcast and the time of arrival of the broadcast is measured by each vehicle. The decentralized navigation algorithm, running independently on each vehicle, is implemented using the information form of the extended Kalman filter and has been previously shown to yield results that are identical to a centralized Kalman filter at the instant of each range measurement. We summarize herein the architecture and design of the acoustic communications (Acomms) system consisting of an underwater acoustic modem, synchronous clock, and the software necessary to run them, and salient results from the validation of the decentralized information filter using a simulated data set.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/86057/1/swebster-4.pd

Service-oriented agent architecture for autonomous maritime vehicles

Advanced ocean systems are increasing their capabilities and the degree of autonomy more and more in order to perform more sophisticated maritime missions. Remotely operated vehicles are no longer cost-effective since they are limited by economic support costs, and the presence and skills of the human operator. Alternatively, autonomous surface and underwater vehicles have the potential to operate with greatly reduced overhead costs and level of operator intervention. This Thesis proposes an Intelligent Control Architecture (ICA) to enable multiple collaborating marine vehicles to autonomously carry out underwater intervention missions. The ICA is generic in nature but aimed at a case study where a marine surface craft and an underwater vehicle are required to work cooperatively. They are capable of cooperating autonomously towards the execution of complex activities since they have different but complementary capabilities. The architectural foundation to achieve the ICA lays on the flexibility of service-oriented computing and agent technology. An ontological database captures the operator skills, platform capabilities and, changes in the environment. The information captured, stored as knowledge, enables reasoning agents to plan missions based on the current situation. The ICA implementation is verified in simulation, and validated in trials by means of a team of autonomous marine robots. This Thesis also presents architectural details and evaluation scenarios of the ICA, results of simulations and trials from different maritime operations, and future research directions

Contributions to automated realtime underwater navigation

Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution February 2012This dissertation presents three separate–but related–contributions to the art of underwater navigation. These methods may be used in postprocessing with a human in the loop, but the overarching goal is to enhance vehicle autonomy, so the emphasis is on automated approaches that can be used in realtime. The three research threads are: i) in situ navigation sensor alignment, ii) dead reckoning through the water column, and iii) model-driven delayed measurement fusion. Contributions to each of these areas have been demonstrated in simulation, with laboratory data, or in the field–some have been demonstrated in all three arenas. The solution to the in situ navigation sensor alignment problem is an asymptotically stable adaptive identifier formulated using rotors in Geometric Algebra. This identifier is applied to precisely estimate the unknown alignment between a gyrocompass and Doppler velocity log, with the goal of improving realtime dead reckoning navigation. Laboratory and field results show the identifier performs comparably to previously reported methods using rotation matrices, providing an alignment estimate that reduces the position residuals between dead reckoning and an external acoustic positioning system. The Geometric Algebra formulation also encourages a straightforward interpretation of the identifier as a proportional feedback regulator on the observable output error. Future applications of the identifier may include alignment between inertial, visual, and acoustic sensors. The ability to link the Global Positioning System at the surface to precision dead reckoning near the seafloor might enable new kinds of missions for autonomous underwater vehicles. This research introduces a method for dead reckoning through the water column using water current profile data collected by an onboard acoustic Doppler current profiler. Overlapping relative current profiles provide information to simultaneously estimate the vehicle velocity and local ocean current–the vehicle velocity is then integrated to estimate position. The method is applied to field data using online bin average, weighted least squares, and recursive least squares implementations. This demonstrates an autonomous navigation link between the surface and the seafloor without any dependence on a ship or external acoustic tracking systems. Finally, in many state estimation applications, delayed measurements present an interesting challenge. Underwater navigation is a particularly compelling case because of the relatively long delays inherent in all available position measurements. This research develops a flexible, model-driven approach to delayed measurement fusion in realtime Kalman filters. Using a priori estimates of delayed measurements as augmented states minimizes the computational cost of the delay treatment. Managing the augmented states with time-varying conditional process and measurement models ensures the approach works within the proven Kalman filter framework–without altering the filter structure or requiring any ad-hoc adjustments. The end result is a mathematically principled treatment of the delay that leads to more consistent estimates with lower error and uncertainty. Field results from dead reckoning aided by acoustic positioning systems demonstrate the applicability of this approach to real-world problems in underwater navigation.I have been financially supported by: the National Defense Science and Engineering Graduate (NDSEG) Fellowship administered by the American Society for Engineering Education, the Edwin A. Link Foundation Ocean Engineering and Instrumentation Fellowship, and WHOI Academic Programs office

Optimized state feedback regulation of 3DOF helicopter system via extremum seeking

In this paper, an optimized state feedback regulation of a 3 degree of freedom (DOF) helicopter is designed via extremum seeking (ES) technique. Multi-parameter ES is applied to optimize the tracking performance via tuning State Vector Feedback with Integration of the Control Error (SVFBICE). Discrete multivariable version of ES is developed to minimize a cost function that measures the performance of the controller. The cost function is a function of the error between the actual and desired axis positions. The controller parameters are updated online as the optimization takes place. This method significantly decreases the time in obtaining optimal controller parameters. Simulations were conducted for the online optimization under both fixed and varying operating conditions. The results demonstrate the usefulness of using ES for preserving the maximum attainable performance

Full State History Cooperative Localisation with Complete Information Sharing

This thesis presents a decentralised localisation method for multiple robots. We enable reduced bandwidth requirements whilst using local solutions that fuse information from other robots. This method does not specify a communication topology or require complex tracking of information. The methods for including shared data match standard elements of nonlinear optimisation algorithms. There are four contributions in this thesis. The first is a method to split the multiple vehicle problem into sections that can be iteratively transmitted in packets with bandwidth bounds. This is done through delayed elimination of external states, which are states involved in intervehicle observations. Observations are placed in subgraphs that accumulate between external states. Internal states, which are all states not involved in intervehicle observations, can then be eliminated from each subgraph and the joint probability of the start and end states is shared between vehicles and combined to yield the solution to the entire graph. The second contribution is usage of variable reordering within these packets to enable handling of delayed observations that target an existing state such as with visual loop closures. We identify the calculations required to give the conditional probability of the delayed historical state on the existing external states before and after. This reduces the recalculation to updating the factorisation of a single subgraph and is independent of the time since the observation was made. The third contribution is a method and conditions for insertion of states into existing packets that does not invalidate previously transmitted data. We derive the conditions that enable this method and our fourth contribution is two motion models that conform to the conditions. Together this permits handling of the general out of sequence case