Towards a new generation of transport services adapted to multimedia application

Une connexion d'ordre et de fiabilité partiels (POC, partial order connection) est une connexion de transport autorisée à perdre certains objets mais également à les délivrer dans un ordre éventuellement différent de celui d'émission. L'approche POC établit un lien conceptuel entre les protocoles sans connexion au mieux et les protocoles fiables avec connexion. Le concept de POC est motivé par le fait que dans les réseaux hétérogènes sans connexion tels qu'Internet, les paquets transmis sont susceptibles de se perdre et d'arriver en désordre, entraînant alors une réduction des performances des protocoles usuels. De plus, on montre qu'un protocole associé au transport d'un flux multimédia permet une réduction très sensible de l'utilisation des ressources de communication et de mémorisation ainsi qu'une diminution du temps de transit moyen. Dans cet article, une extension temporelle de POC, nommée TPOC (POC temporisé), est introduite. Elle constitue un cadre conceptuel permettant la prise en compte des exigences de qualité de service des applications multimédias réparties. Une architecture offrant un service TPOC est également introduite et évaluée dans le cadre du transport de vidéo MPEG. Il est ainsi démontré que les connexions POC comblent, non seulement le fossé conceptuel entre les protocoles sans connexion et avec connexion, mais aussi qu'ils surpassent les performances des ces derniers lorsque des données multimédias (telles que la vidéo MPEG) sont transportées

A survey of handover algorithms in DVB-H

Digital Video Broadcasting for Handhelds (DVB-H) is a standard for broadcasting IP Datacast (IPDC) services to mobile handheld terminals. Based on the DVB-T standard, DVB-H adds new features such as time slicing, MPE-FEC, in-depth interleavers, mandatory cell id identifier, optional 4K-modulation mode and the use of 5 MHz bandwidth in addition to the usually used 6, 7, or 8 MHz raster. IPDC over DVB-H is proposed for ETSI to complement the DVB-H standard by combining IPDC and DVB-H in an end-to-end system. Handover in such unidirectional broadcasting networks is a novel issue. In the last few years since the birth of DVB-H technology, great attention has been given to the performance analysis of DVB-H mobile terminals. Handover is one of the main research topics for DVB-H in mobile scenarios. Better reception quality and greater power efficiency are considered to be the main targets of handover research for DVB-H. New algorithms for different handover stages in DVB-H have been the subject of recent research and are currently being studied. Further novel algorithms need to be designed to improve the mobile reception quality. This article provides a comprehensive survey of the handover algorithms in DVB-H. A systematic evaluation and categorization approach is proposed based on the problems the algorithms solve and the handover stages being focused on. Criteria are proposed and analyzed to facilitate designing better handover algorithms for DVB-H that have been identified from the research conducted by the author

Digital television applications

Studying development of interactive services for digital television is a leading edge area of work as there is minimal research or precedent to guide their design. Published research is limited and therefore this thesis aims at establishing a set of computing methods using Java and XML technology for future set-top box interactive services. The main issues include middleware architecture, a Java user interface for digital television, content representation and return channel communications. The middleware architecture used was made up of an Application Manager, Application Programming Interface (API), a Java Virtual Machine, etc., which were arranged in a layered model to ensure the interoperability. The application manager was designed to control the lifecycle of Xlets; manage set-top box resources and remote control keys and to adapt the graphical device environment. The architecture of both application manager and Xlet forms the basic framework for running multiple interactive services simultaneously in future set-top box designs. User interface development is more complex for this type of platform (when compared to that for a desktop computer) as many constraints are set on the look and feel (e.g., TV-like and limited buttons). Various aspects of Java user interfaces were studied and my research in this area focused on creating a remote control event model and lightweight drawing components using the Java Abstract Window Toolkit (AWT) and Java Media Framework (JMF) together with Extensible Markup Language (XML). Applications were designed aimed at studying the data structure and efficiency of the XML language to define interactive content. Content parsing was designed as a lightweight software module based around two parsers (i.e., SAX parsing and DOM parsing). The still content (i.e., text, images, and graphics) and dynamic content (i.e., hyperlinked text, animations, and forms) can then be modeled and processed efficiently. This thesis also studies interactivity methods using Java APIs via a return channel. Various communication models are also discussed that meet the interactivity requirements for different interactive services. They include URL, Socket, Datagram, and SOAP models which applications can choose to use in order to establish a connection with the service or broadcaster in order to transfer data. This thesis is presented in two parts: The first section gives a general summary of the research and acts as a complement to the second section, which contains a series of related publications.reviewe

Processing Structured Hypermedia : A Matter of Style

With the introduction of the World Wide Web in the early nineties, hypermedia has become the uniform interface to the wide variety of information sources available over the Internet. The full potential of the Web, however, can only be realized by building on the strengths of its underlying research fields. This book describes the areas of hypertext, multimedia, electronic publishing and the World Wide Web and points out fundamental similarities and differences in approaches towards the processing of information. It gives an overview of the dominant models and tools developed in these fields and describes the key interrelationships and mutual incompatibilities. In addition to a formal specification of a selection of these models, the book discusses the impact of the models described on the software architectures that have been developed for processing hypermedia documents. Two example hypermedia architectures are described in more detail: the DejaVu object-oriented hypermedia framework, developed at the VU, and CWI's Berlage environment for time-based hypermedia document transformations

A Web-Based Collaborative Multimedia Presentation Document System

With the distributed and rapidly increasing volume of data and expeditious development of modern web browsers, web browsers have become a possible legitimate vehicle for remote interactive multimedia presentation and collaboration, especially for geographically dispersed teams. To our knowledge, although there are a large number of applications developed for these purposes, there are some drawbacks in prior work including the lack of interactive controls of presentation flows, general-purpose collaboration support on multimedia, and efficient and precise replay of presentations. To fill the research gaps in prior work, in this dissertation, we propose a web-based multimedia collaborative presentation document system, which models a presentation as media resources together with a stream of media events, attached to associated media objects. It represents presentation flows and collaboration actions in events, implements temporal and spatial scheduling on multimedia objects, and supports real-time interactive control of the predefined schedules. As all events are represented by simple messages with an object-prioritized approach, our platform can also support fine-grained precise replay of presentations. Hundreds of kilobytes could be enough to store the events in a collaborative presentation session for accurate replays, compared with hundreds of megabytes in screen recording tools with a pixel-based replay mechanism

Model-Driven Development of Interactive Multimedia Applications

The development of highly interactive multimedia applications is still a challenging and complex task. In addition to the application logic, multimedia applications typically provide a sophisticated user interface with integrated media objects. As a consequence, the development process involves different experts for software design, user interface design, and media design. There is still a lack of concepts for a systematic development which integrates these aspects. This thesis provides a model-driven development approach addressing this problem. Therefore it introduces the Multimedia Modeling Language (MML), a visual modeling language supporting a design phase in multimedia application development. The language is oriented on well-established software engineering concepts, like UML 2, and integrates concepts from the areas of multimedia development and model-based user interface development. MML allows the generation of code skeletons from the models. Thereby, the core idea is to generate code skeletons which can be directly processed in multimedia authoring tools. In this way, the strengths of both are combined: Authoring tools are used to perform the creative development tasks while models are used to design the overall application structure and to enable a well-coordinated development process. This is demonstrated using the professional authoring tool Adobe Flash. MML is supported by modeling and code generation tools which have been used to validate the approach over several years in various student projects and teaching courses. Additional prototypes have been developed to demonstrate, e.g., the ability to generate code for different target platforms. Finally, it is discussed how models can contribute in general to a better integration of well-structured software development and creative visual design

A brief review: Multimedia authoring modeling

Multimedia Authoring is a way to develop a multimedia presentation. Multimedia content includes images, sounds, videos, texts, and animations. The Kernel Mechanism of Multimedia Authoring consists of the Multimedia Authoring Programming Language and the Multimedia Authoring Model. Multimedia Authoring modeling is designed to enable the Multimedia Authoring function appropriately. Since the beginning of designing multimedia authoring tools, various studies were conducted to create a multimedia authoring model. Multimedia Authoring models that have been studied in existing research are Petri Nets, Hoare Logic, and LOTOS. The three models use different approaches. Petri Net uses a model based on graph calculations, Hoare logic uses mathematical logic, and LOTOS uses a formal specification language. Each of these models has been developed and modified to have higher capabilities. This model modification has advantages over the original model. This review article discusses the development and modifications of these models