A low-power asynchronous VLSI FIR filter

An asynchronous FIR filter, based on a Single Bit-Plane architecture with a data-dependent, dynamic-logic implementation, is presented. Its energy consumption and sample computation delay are shown to correlate approximately linearly with the total number of ones in its coeflcient-set. The proposed architecture has the property that coefficients in a Sign-Magnitude representation can be handled at negligible overhead which, for typical filter coefficient-sets, is shown to offer significant benefits to both energy consumption and throughput. Transistor level simulations show energy consumption to be lower than in previously reported designs

Implementation of arithmetic primitives using truly deep submicron technology (TDST)

The invention of the transistor in 1947 at Bell Laboratories revolutionised the electronics industry and created a powerful platform for emergence of new industries. The quest to increase the number of devices per chip over the last four decades has resulted in rapid transition from Small-Scale-Integration (SSI) and Large-Scale-lntegration (LSI), through to the Very-Large-Scale-Integration (VLSI) technologies, incorporating approximately 10 to 100 million devices per chip. The next phase in this evolution is the Ultra-Large-Scale-Integration (ULSI) aiming to realise new application domains currently not accessible to CMOS technology. Although technology is continuously evolving to produce smaller systems with minimised power dissipation, the IC industry is facing major challenges due to constraints on power density (W/cm2) and high dynamic (operating) and static (standby) power dissipation. Mobile multimedia communication and optical based technologies have rapidly become a significant area of research and development challenging a variety of technological fronts. The future emergence or 4G (4th Generation) wireless communications networks is further driving this development, requiring increasing levels of media rich content. The processing requirements for capture, conversion, compression, decompression, enhancement and display of higher quality multimedia, place heavy demands on current ULSI systems. This is also apparent for mobile applications and intelligent optical networks where silicon chip area and power dissipation become primary considerations. In addition to the requirements for very low power, compact size and real-time processing, the rapidly evolving nature of telecommunication networks means that flexible soft programmable systems capable of adaptation to support a number of different standards and/or roles become highly desirable. In order to fully realise the capabilities promised by the 4G and supporting intelligent networks, new enabling technologies arc needed to facilitate the next generation of personal communications devices. Most of the current solutions to meet these challenges are based on various implementations of conventional architectures. For decades, silicon has been the main platform of computing, however it is slow, bulky, runs too hot, and is too expensive. Thus, new approaches to architectures, driving multimedia and future telecommunications systems, are needed in order to extend the life cycle of silicon technology. The emergence of Truly Deep Submicron Technology (TDST) and related 3-D interconnection technologies have provided potential alternatives from conventional architectures to 3-D system solutions, through integration of IDST, Vertical Software Mapping and Intelligent Interconnect Technology (IIT). The concept of Soft-Chip Technology (SCT) entails integration of Soft• Processing Circuits with Soft-Configurable Circuits . This concept can effectively manipulate hardware primitives through vertical integration of control and data. Thus the notion of 3-D Soft-Chip emerges as a new design algorithm for content-rich multimedia, telecommunication and intelligent networking system applications. 3•D architectures (design algorithms used suitable for 3-D soft-chip technology), are driven by three factors. The first is development of new device technology (TDST) that can support new architectures with complexities of 100M to 1000M devices. The second is development of advanced wafer bonding techniques such as Indium bump and the more futuristic optical interconnects for 3-D soft-chip mapping. The third is related to improving the performance of silicon CMOS systems as devices continue to scale down in dimensions. One of the fundamental building blocks of any computer system is the arithmetic component. Optimum performance of the system is determined by the efficiency of each individual component, as well as the network as a whole entity. Development of configurable arithmetic primitives is the fundamental focus in 3-D architecture design where functionality can be implemented through soft configurable hardware elements. Therefore the ability to improve the performance capability of a system is of crucial importance for a successful design. Important factors that predict the efficiency of such arithmetic components are: • The propagation delay of the circuit, caused by the gate, diffusion and wire capacitances within !he circuit, minimised through transistor sizing. and • Power dissipation, which is generally based on node transition activity. [2] Although optimum performance of 3-D soft-chip systems is primarily established by the choice of basic primitives such as adders and multipliers, the interconnecting network also has significant degree of influence on !he efficiency of the system. 3-D superposition of devices can decrease interconnect delays by up to 60% compared to a similar planar architecture. This research is based on development and implementation of configurable arithmetic primitives, suitable to the 3-D architecture, and has these foci: • To develop a variety of arithmetic components such as adders and multipliers with particular emphasis on minimum area and compatible with 3-D soft-chip design paradigm. • To explore implementation of configurable distributed primitives for arithmetic processing. This entails optimisation of basic primitives, and using them as part of array processing. In this research the detailed designs of configurable arithmetic primitives are implemented using TDST O.l3µm (130nm) technology, utilising CAD software such as Mentor Graphics and Cadence in Custom design mode, carrying through design, simulation and verification steps

On the Implementation of Efficient Channel Filters for Wideband Receivers by Optimizing Common Subexpression Elimination Methods

No abstract availabl

Design of a reusable distributed arithmetic filter and its application to the affine projection algorithm

Digital signal processing (DSP) is widely used in many applications spanning the spectrum from audio processing to image and video processing to radar and sonar processing. At the core of digital signal processing applications is the digital filter which are implemented in two ways, using either finite impulse response (FIR) filters or infinite impulse response (IIR) filters. The primary difference between FIR and IIR is that for FIR filters, the output is dependent only on the inputs, while for IIR filters the output is dependent on the inputs and the previous outputs. FIR filters also do not sur from stability issues stemming from the feedback of the output to the input that aect IIR filters. In this thesis, an architecture for FIR filtering based on distributed arithmetic is presented. The proposed architecture has the ability to implement large FIR filters using minimal hardware and at the same time is able to complete the FIR filtering operation in minimal amount of time and delay when compared to typical FIR filter implementations. The proposed architecture is then used to implement the fast affine projection adaptive algorithm, an algorithm that is typically used with large filter sizes. The fast affine projection algorithm has a high computational burden that limits the throughput, which in turn restricts the number of applications. However, using the proposed FIR filtering architecture, the limitations on throughput are removed. The implementation of the fast affine projection adaptive algorithm using distributed arithmetic is unique to this thesis. The constructed adaptive filter shares all the benefits of the proposed FIR filter: low hardware requirements, high speed, and minimal delay.Ph.D.Committee Chair: Anderson, Dr. David V.; Committee Member: Hasler, Dr. Paul E.; Committee Member: Mooney, Dr. Vincent J.; Committee Member: Taylor, Dr. David G.; Committee Member: Vuduc, Dr. Richar

Studies on Implementation of . . . High Throughput and Low Power Consumption

In this thesis we discuss design and implementation of frequency selective digital filters with high throughput and low power consumption. The thesis includes proposed arithmetic transformations of lattice wave digital filters that aim at increasing the throughput and reduce the power consumption of the filter implementation. The thesis also includes two case studies where digital filters with high throughput and low power consumption are required. A method for obtaining high throughput as well as reduced power consumption of digital filters is arithmetic transformation of the filter structure. In this thesis arithmetic transformations of first- and second-order Richards’ allpass sections composed by symmetric two-port adaptors and implemented using carry-save arithmetic are proposed. Such filter sections can be used for implementation of lattice wave digital filters and bireciprocal lattice wave digital filters. The latter structures are efficient for implementation of interpolators and decimators by factors of two. Th

Second year technical report on-board processing for future satellite communications systems

Advanced baseband and microwave switching techniques for large domestic communications satellites operating in the 30/20 GHz frequency bands are discussed. The nominal baseband processor throughput is one million packets per second (1.6 Gb/s) from one thousand T1 carrier rate customer premises terminals. A frequency reuse factor of sixteen is assumed by using 16 spot antenna beams with the same 100 MHz bandwidth per beam and a modulation with a one b/s per Hz bandwidth efficiency. Eight of the beams are fixed on major metropolitan areas and eight are scanning beams which periodically cover the remainder of the U.S. under dynamic control. User signals are regenerated (demodulated/remodulated) and message packages are reformatted on board. Frequency division multiple access and time division multiplex are employed on the uplinks and downlinks, respectively, for terminals within the coverage area and dwell interval of a scanning beam. Link establishment and packet routing protocols are defined. Also described is a detailed design of a separate 100 x 100 microwave switch capable of handling nonregenerated signals occupying the remaining 2.4 GHz bandwidth with 60 dB of isolation, at an estimated weight and power consumption of approximately 400 kg and 100 W, respectively