A Bio-Inspired Manipulator with Claw Prototype for Winged Aerial Robots: Benchmark for Design and Control

Nature exhibits many examples of birds, insects and flying mammals with flapping wings and limbs offering some functionalities. Although in robotics, there are some examples of flying robots with wings, it has not been yet a goal to add to them some manipulation-like capabilities, similar to ones that are exhibited on birds. The flying robot (ornithopter) that we propose improves the existent aerial manipulators based on multirotor platforms in terms of longer flight duration of missions and safety in proximity to humans. Moreover, the manipulation capabilities allows them to perch in inaccessible places and perform some tasks with the body perched. This work presents a first prototype of lightweight manipulator to be mounted to an ornithopter and a new control methodology to balance them while they are perched and following a desired path with the end effector imitating their beaks. This allows for several possible applications, such as contact inspection following a path with an ultrasonic sensor mounted in the end effector. The manipulator prototype imitates birds with two-link legs and a body link with an actuated limb, where the links are all active except for the first passive one with a grabbing mechanism in its base, imitating a claw. Unlike standard manipulators, the lightweight requirement limits the frame size and makes it necessary to use micro motors. Successful experimental results with this prototype are reported.European Research Council 78824

Reinforcement Learning Adaptive PID Controller for an Under-actuated Robot Arm

Abstract: An adaptive PID controller is used to control of a two degrees of freedom under actuated manipulator. An actor-critic based reinforcement learning is employed for tuning of parameters of the adaptive PID controller. Reinforcement learning is an unsupervised scheme wherein no reference exists to which convergence of algorithm is anticipated. Thus, it is appropriate for real time applications. Controller structure and learning equations as well as update rules are provided. Simulations are performed in SIMULINK and performance of the controller is compared with NARMA-L2 controller. The results verified good performance of the controller in tracking and disturbance rejection tests

Control of an Underactuated Three-Link Passive-Active- Active Manipulator Based on Three Stages and Stability Analysis

This paper presents a novel three-stage control strategy for the motion control of an underactuated three-link passive-active-active (PAA) manipulator. First, a nonlinear control law is designed to make the angle and angular velocity of the third link convergent to zero. Then, a swing-up control law is designed to increase the system energy and control the posture of the second link. Finally, an integrated method with linear control and nonlinear control is introduced to stabilize the manipulator at the straight-up position. The stability of the control system is guaranteed by Lyapunov theory and LaSalle's invariance principle. Compared to other approaches, the proposed strategy innovatively introduces a preparatory stage to drive the third link to stretch-out toward the second link in a natural way, which makes the swing-up control easy and quick. Besides, the intergraded method ensures the manipulator moving into the balancing stage smoothly and easily. The effectiveness and efficiency of the control strategy are demonstrated by numerical simulations

Advancing the Underactuated Grasping Capabilities of Single Actuator Prosthetic Hands

The last decade has seen significant advancements in upper limb prosthetics, specifically in the myoelectric control and powered prosthetic hand fields, leading to more active and social lifestyles for the upper limb amputee community. Notwithstanding the improvements in complexity and control of myoelectric prosthetic hands, grasping still remains one of the greatest challenges in robotics. Upper-limb amputees continue to prefer more antiquated body-powered or powered hook terminal devices that are favored for their control simplicity, lightweight and low cost; however, these devices are nominally unsightly and lack in grasp variety. The varying drawbacks of both complex myoelectric and simple body-powered devices have led to low adoption rates for all upper limb prostheses by amputees, which includes 35% pediatric and 23% adult rejection for complex devices and 45% pediatric and 26% adult rejection for body-powered devices [1]. My research focuses on progressing the grasping capabilities of prosthetic hands driven by simple control and a single motor, to combine the dexterous functionality of the more complex hands with the intuitive control of the more simplistic body-powered devices with the goal of helping upper limb amputees return to more active and social lifestyles. Optimization of a prosthetic hand driven by a single actuator requires the optimization of many facets of the hand. This includes optimization of the finger kinematics, underactuated mechanisms, geometry, materials and performance when completing activities of daily living. In my dissertation, I will present chapters dedicated to improving these subsystems of single actuator prosthetic hands to better replicate human hand function from simple control. First, I will present a framework created to optimize precision grasping – which is nominally unstable in underactuated configurations – from a single actuator. I will then present several novel mechanisms that allow a single actuator to map to higher degree of freedom motion and multiple commonly used grasp types. I will then discuss how fingerpad geometry and materials can better grasp acquisition and frictional properties within the hand while also providing a method of fabricating lightweight custom prostheses. Last, I will analyze the results of several human subject testing studies to evaluate the optimized hands performance on activities of daily living and compared to other commercially available prosthesis

Friction compensation in the swing-up control of viscously damped underactuated robotics

A dissertation submitted to the Faculty of Engineering and the Built Environment, University of the Witwatersrand, Johannesburg, in fulfilment of the requirements for the degree of Master of Science in Engineering in the Control Research Group School of Electrical and Information Engineering, Johannesburg, 2017In this research, we observed a torque-related limitation in the swing-up control of underactuated mechanical systems which had been integrated with viscous damping in the unactuated joint. The objective of this research project was thus to develop a practical work-around solution to this limitation. The nth order underactuated robotic system is represented in this research as a collection of compounded pendulums with n-1 actuators placed at each joint with the exception of the first joint. This system is referred to as the PAn-1 robot (Passive first joint, followed by n-1 Active joints), with the Acrobot (PA1 robot) and the PAA robot (or PA2 robot) being among the most well-known examples. A number of friction models exist in literature, which include, and are not exclusive to, the Coulomb and the Stribeck effect models, but the viscous damping model was selected for this research since it is more extensively covered in existing literature. The effectiveness of swing-up control using Lyapunov’s direct method when applied on the undamped PAn-1 robot has been vigorously demonstrated in existing literature, but there is no literature that discusses the swing-up control of viscously damped systems. We show, however, that the application of satisfactory swing-up control using Lyapunov’s direct method is constrained to underactuated systems that are either undamped or actively damped (viscous damping integrated into the actuated joints only). The violation of this constraint results in the derivation of a torque expression that cannot be solved for (invertibility problem, for systems described by n > 2) or a torque expression which contains a conditional singularity (singularity problem, for systems with n = 2). This constraint is formally summarised as the matched damping condition, and highlights a clear limitation in the Lyapunov-related swing-up control of underactuated mechanical systems. This condition has significant implications on the practical realisation of the swing-up control of underactuated mechanical systems, which justifies the investigation into the possibility of a work-around. We thus show that the limitation highlighted by the matched damping condition can be overcome through the implementation of the partial feedback linearisation (PFL) technique. Two key contributions are generated from this research as a result, which iii include the gain selection criterion (for Traditional Collocated PFL), and the convergence algorithm (for noncollocated PFL). The gain selection criterion is an analytical solution that is composed of a set of inequalities that map out a geometric region of appropriate gains in the swing-up gain space. Selecting a gain combination within this region will ensure that the fully-pendent equilibrium point (FPEP) is unstable, which is a necessary condition for swing-up control when the system is initialised near the FPEP. The convergence algorithm is an experimental solution that, once executed, will provide information about the distal pendulum’s angular initial condition that is required to swing-up a robot with a particular angular initial condition for the proximal pendulum, along with the minimum gain that is required to execute the swing-up control in this particular configuration. Significant future contributions on this topic may result from the inclusion of more complex friction models. Additionally, the degree of actuation of the system may be reduced through the implementation of energy storing components, such as torsional springs, at the joint. In summary, we present two contributions in the form of the gain selection criterion and the convergence algorithm which accommodate the circumnavigation of the limitation formalised as the matched damping condition. This condition pertains to the Lyapunov-related swing-up control of underactuated mechanical systems that have been integrated with viscous damping in the unactuated joint.CK201

Dexterity of underactuated six degrees of freedom three dimensional redundant manipulators

We quantify the dexterity of underactuated robot manipulators equipped with active and passive joints. We discuss the harnessing of redundant degrees of freedom in a robotic manipulator in order to keep it in service. We assume that the passive joints are locked at an arbitrary known position. There are three important dexterity measures: workspace volume, reachability, and manipulability. We discuss the workspace volume of a six degrees of freedom, three dimensional, redundant manipulator with an arbitrarily located passive joint. References X. Xin, J.-H. She, T. Yamasaki and Y. Liu, Swing-up control based on virtual composite links for n-link underactuated robot with passive first joint, Automatica, 45(9):1986–1994, 2009. doi:10.1016/j.automatica.2009.04.023 M. Bergerman and Y. Xu, Dexterity of underactuated manipulators, ICAR, 719–724, 1997. doi:10.1109/ICAR.1997.620261 S, Yahya, M. Moghavvemi and H. A. F. Mohamed, Singularity Avoidance of a Six Degrees of Freedom Three Dimensional Redundant Planar Manipulator, Comput. Math. Appl., 64(5):856–868, 2012. doi:10.1016/j.camwa.2011.12.073 S. Yahya, M. Moghavvemi and H. A. F. Almurib, Joint Torque Reduction of a Three Dimensional Redundant Planar Manipulator, Sensors, 12(6):6869–6892, 2012. doi:10.3390/s120606869 A. K. Pradeep, P. J. Yoder, R. Mukundan, R. J. Schilling, Crippled motion in robots, IEEE T. Aero. Elec. Sys., 24(1):2–13, 1988. doi:10.1109/7.1030 R. G. Roberts, Quantifying the local fault tolerance of a kinematically redundant manipulator, Amer. Contr. Conf., 3:1889–1893, 1995. doi:10.1109/ACC.1995.531215 R. G. Roberts and A. A. Maciejewski. A local measure of fault tolerance for kinematically redundant manipulators, IEEE Int. Conf. Robot., 12(4):543–552, 1996. doi:10.1109/70.508437 S. Yahya, M. Moghavvemi and H. A. F. Mohamed. Geometrical approach of planar hyper-redundant manipulators: Inverse kinematics, path planning and workspace, Simul. Model. Pract. Th., 19(1):406–422, 2011. doi:10.1016/j.simpat.2010.08.001 H. A. F. Mohamed, S. Yahya, M. Moghavvemi and S. S. Yang. A New Inverse Kinematics Method for Three Dimensional Redundant Manipulators, ICCAS-SICE, 1557–1562, 2009. http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=5335259&refinements%3D4274859776%26sortType%3Dasc_p_Sequence%26filter%3DAND%28p_IS_Number%3A5332438%2

Intelligent model-based control of complex three-link mechanisms

The aim of this study is to understand the complexity and control challenges of the locomotion of a three-link mechanism of a robot system. In order to do this a three-link robot gymnast (Robogymnast) has been built in Cardiff University. The Robogymnast is composed of three links (one arm, one torso, one leg) and is powered by two geared DC motors. Currently the robot has three potentiometers to measure the relative angles between adjacent links and only one tachometer to measure the relative angular position of the first link. A mathematical model for the robot is derived using Lagrange equations. Since the model is inherently nonlinear and multivariate, it presents more challenges when modelling the Robogymnast and dealing with control motion problems. The proposed approach for dealing with the design of the control system is based on a discrete-time linear model around the upright position of the Robogymnast. To study the swinging motion of the Robogymnast, a new technique is proposed to manipulate the frequency and the amplitude of the sinusoidal signals as a means of controlling the motors. Due to the many combinations of the frequency and amplitude, an optimisation method is required to find the optimal set. The Bees Algorithm (BA), a novel swarm-based optimisation technique, is used to enhance the performance of the swinging motion through optimisation of the manipulated parameters of the control actions. The time taken to reach the upright position at its best is 128 seconds. Two different control methods are adopted to study the balancing/stablising of the Robogymnast in both the downward and upright configurations. The first is the optimal control algorithm using the Linear Quadratic Regulator (LQR) technique with integrators to help achieve and maintain the set of reference trajectories. The second is a combination of Local Control (LC) and LQR. Each controller is implemented via reduced order state observer to estimate the unmeasured states in terms of their relative angular velocities. From the identified data in the relative angular positions of the upright balancing control, it is reported that the maximum amplitude of the deviation in the relative angles on average are approximately 7.5° for the first link and 18° for the second link. It is noted that the third link deviated approximately by 2.5° using only the LQR controller, and no significant deviation when using the LQR with LC. To explore the combination between swinging and balancing motions, a switching mechanism between swinging and balancing algorithm is proposed. This is achieved by dividing the controller into three stages. The first stage is the swinging control, the next stage is the transition control which is accomplished using the Independent Joint Control (IJC) technique and finally balancing control is achieved by the LQR. The duration time of the transition controller to track the reference trajectory of the Robogymnast at its best is found to be within 0.4 seconds. An external disturbance is applied to each link of the Robogymnast separately in order to study the controller's ability to overcome the disturbance and to study the controller response. The simulation of the Robogymnast and experimental realization of the controllers are implemented using MATLAB® software and the C++ program environment respectively

Climbing and Walking Robots

Nowadays robotics is one of the most dynamic fields of scientific researches. The shift of robotics researches from manufacturing to services applications is clear. During the last decades interest in studying climbing and walking robots has been increased. This increasing interest has been in many areas that most important ones of them are: mechanics, electronics, medical engineering, cybernetics, controls, and computers. Today’s climbing and walking robots are a combination of manipulative, perceptive, communicative, and cognitive abilities and they are capable of performing many tasks in industrial and non- industrial environments. Surveillance, planetary exploration, emergence rescue operations, reconnaissance, petrochemical applications, construction, entertainment, personal services, intervention in severe environments, transportation, medical and etc are some applications from a very diverse application fields of climbing and walking robots. By great progress in this area of robotics it is anticipated that next generation climbing and walking robots will enhance lives and will change the way the human works, thinks and makes decisions. This book presents the state of the art achievments, recent developments, applications and future challenges of climbing and walking robots. These are presented in 24 chapters by authors throughtot the world The book serves as a reference especially for the researchers who are interested in mobile robots. It also is useful for industrial engineers and graduate students in advanced study