Solar array fed synchronous reluctance motor driven water pump : an improved performance under partial shading conditions

An improved performance of a photovoltaic (PV) pumping system employing a synchronous reluctance motor (SynRM) under partial shading conditions is proposed. The system does not include the dc-dc converter that is predominantly being utilized for maximizing the output power of the PV array. In addition, storage batteries are also not contained. A conventional inverter connected directly to the PV array is used to drive the SynRM. Further, a control strategy is proposed to drive the inverter so that the maximum output power of the PV array is achieved while the SynRM is working at the maximum torque per Ampere condition. Consequently, this results in an improved system efficiency and cost. Moreover, two maximum power point tracking (MPPT) techniques are compared under uniform and partial shadow irradiation conditions. The first MPPT algorithm is based on the conventional perturbation and observation (P&O) method and the second one uses a differential evolution (DE) optimization technique. It is found that the DE optimization method leads to a higher PV output power than using the P&O method under the partial shadow condition. Hence, the pump flow rate is much higher. However, under a uniform irradiation level, the PV system provides the available maximum power using both MPPT techniques. The experimental measurements are obtained to validate the theoretical work

Particle Swarm Optimization

Particle swarm optimization (PSO) is a population based stochastic optimization technique influenced by the social behavior of bird flocking or fish schooling.PSO shares many similarities with evolutionary computation techniques such as Genetic Algorithms (GA). The system is initialized with a population of random solutions and searches for optima by updating generations. However, unlike GA, PSO has no evolution operators such as crossover and mutation. In PSO, the potential solutions, called particles, fly through the problem space by following the current optimum particles. This book represents the contributions of the top researchers in this field and will serve as a valuable tool for professionals in this interdisciplinary field

Computational Intelligence Application in Electrical Engineering

The Special Issue "Computational Intelligence Application in Electrical Engineering" deals with the application of computational intelligence techniques in various areas of electrical engineering. The topics of computational intelligence applications in smart power grid optimization, power distribution system protection, and electrical machine design and control optimization are presented in the Special Issue. The co-simulation approach to metaheuristic optimization methods and simulation tools for a power system analysis are also presented. The main computational intelligence techniques, evolutionary optimization, fuzzy inference system, and an artificial neural network are used in the research presented in the Special Issue. The articles published in this issue present the recent trends in computational intelligence applications in the areas of electrical engineering

Parameter identification of induction motor

Numerous recent techniques of induction motor parameters calculating are hard to be done and expensive. Accurate calculations of the parameters of these motors would allow savings in different prospective like energy and cost. The major problem in calculating induction motor parameters is that it\u27s hard to measure output power precisely and without harm during the operation of the machines. It will be better to find other way to find out the output power with certain amount of inputs like input voltage and current.;Particle swarm optimization (PSO) and genetic algorithms (GAs) are often used to estimate quantities from limited information. They belong to a class of weak search procedures, that is, they do not provide the best solution, but one close to it. It is a randomized process in which follows the principles of evolution.;In this thesis genetic algorithm and partial swarm optimization are used to identify induction motor parameters. The inputs used to estimate electrical and mechanical parameters are measured stator voltages and currents. The estimated parameters compare well with the actual parameters. Data Acquisition (DAQ) is used to obtain these variable with the help of LABVIEW software. The induction motor used is a 7.5-hp with a constant frequency and in free acceleration. IEEE standard test of 7.5-hp induction motor is used to compare with performance of the simulated and measured data obtained. According to the output results, method of optimizing induction machine can be used in different models of induction motor

Development of new methods for nonintrusive induction motor energy efficiency estimation

Induction motors (IMs) are the most widely used motors in industries. They constitute about 70% of the total motors used in industries and are the largest energy consumers in industrial applications. As a result of the increasing need for energy savings and demand-side management, the development of methods for accurate energy efficiency estimation has become a crucial area of research. While several methods have been proposed for induction motor efficiency determination, majority of the methods cannot be easily applied in the field owing to the intrusive nature of the test procedures involved. This PhD work presents some novel methods for nonintrusive efficiency estimation of induction motors operating on-site using limited motor terminal measurements and nameplate data. The first method is developed for induction motors operating on sinusoidal supply source (line-fed). The method uses a modified inverse Г-model equivalent circuit with series core loss arrangement to mitigate the inherent problems of higher computational burden and parameter redundancy associated with the conventional equivalent circuit method. Furthermore, a new method is presented for estimating the friction and windage loss using the airgap torque and motor nameplate data. The proposed Nonintrusive Field Efficiency Estimation (NFEE) technique was validated experimentally on four different induction motors for both balanced and unbalanced voltage supply conditions. The results demonstrate the accuracy of the proposed NFEE method and confirm its advantage over the conventional equivalent circuit method. In addition to the problem of unbalanced voltage supply, the presence of harmonics significantly affects the operation of induction motors. The second novel approach for estimating efficiency proposed in this PhD work extends the NFEE method to cover for non-sinusoidal supply condition. The method considers the variation of core loss, rotor bar resistance and leakage inductance due to time harmonics and skin effects. Finally, the efficiency estimations are compared to the IEC/TS 60034-2-3 in the case of a balanced non-sinusoidal supply condition. This allows not only the efficiency comparison but also the loss segregation analysis on the various components of the motor losses. In the case of an unbalanced supply, the efficiency results are compared to measured values obtained based on the direct input-output method. In both the first and second methods, a robust Chicken Swarm Optimization (CSO) algorithm has been used for the first time in conjunction with a simplified inverse Г-model EC to correctly determine the induction motor parameters and hence its losses and efficiency while inservice. As Variable Frequency Drives (VFDs) continue to dominate industrial process control, there is a need for stakeholders to quantify the converter-fed motor losses over a wide range of operating frequency and loading conditions. Although there is an increase in legislative activities, particularly in Europe, towards the classification and improvement of energy efficiency in electric drive systems, the handful of available standards for quantifying the harmonic losses are still undergoing validation. One of such standards is the IEC/TS 60034-2-3, which has been lauded as a step in the right direction. However, its limitation to rated motor frequency has been identified as one of its main weaknesses. Therefore, the third method proposed in this research demonstrates how the IEC/TS 60034-2-3 loss segregation methodology at nominal frequency can be extended over the constant-torque region of an induction motor (IM). The methodology has been validated by testing two motors using a 2-level voltage source inverter (VSI) in an open-loop V/F control mode. The results provide good feedback to the relevant IEC standards committee as well as guidance to stakeholders