322 research outputs found
Optimized Design of Survivable MPLS over Optical Transport Networks. Optical Switching and Networking
In this paper we study different options for the survivability implementation
in MPLS over Optical Transport Networks in terms of network resource usage and
configuration cost. We investigate two approaches to the survivability
deployment: single layer and multilayer survivability and present various
methods for spare capacity allocation (SCA) to reroute disrupted traffic. The
comparative analysis shows the influence of the traffic granularity on the
survivability cost: for high bandwidth LSPs, close to the optical channel
capacity, the multilayer survivability outperforms the single layer one,
whereas for low bandwidth LSPs the single layer survivability is more
cost-efficient. For the multilayer survivability we demonstrate that by mapping
efficiently the spare capacity of the MPLS layer onto the resources of the
optical layer one can achieve up to 22% savings in the total configuration cost
and up to 37% in the optical layer cost. Further savings (up to 9 %) in the
wavelength use can be obtained with the integrated approach to network
configuration over the sequential one, however, at the increase in the
optimization problem complexity. These results are based on a cost model with
actual technology pricing and were obtained for networks targeted to a
nationwide coverage
Maximizing Reliability in WDM Networks Through Lightpath Routing
We study the reliability maximization problem in wavelength division multiplexing (WDM) networks with random link failures. Reliability in these networks is defined as the probability that the logical network is connected, and it is determined by the underlying lightpath routing, network topologies, and the link failure probability. By introducing the notion of lexicographical ordering for lightpath routings, we characterize precise optimization criteria for maximum reliability in the low failure probability regime. Based on the optimization criteria, we develop lightpath routing algorithms that maximize the reliability, and logical topology augmentation algorithms for further improving reliability. We also study the reliability maximization problem in the high failure probability regime.National Science Foundation (U.S.) (Grant CNS-0830961)National Science Foundation (U.S.) (Grant CNS-1017800)United States. Defense Threat Reduction Agency (Grant HDTRA1-07-1-0004)United States. Defense Threat Reduction Agency (Grant HDTRA-09-1-0050
Energy Efficient Survivable IP over WDM Networks with Network Coding
In this work we investigate the use of network coding in 1+1 survivable IP over WDM networks by encoding the protection paths of multiple flow with each other at intermediate nodes. We study the energy efficiency of this scheme through MILP, and a heuristic with five operating options. We evaluate the MILP and the heuristics on typical and regular network topologies. Our results show that implementing network coding can produce savings up to 37% on the ring topology and 23% considering typical topologies. We also study the impact of varying the demand volumes on the network coding performanc
Optimal Regenerator Placement for Dedicated Path Protection in Impairment-Aware WDM Networks
Building resilient Wavelength Division Multiplexed (WDM) optical networks is an important area of research. This thesis deals with the design of reliable WDM networks where physical layer impairments are taken into account. This research addresses both the regenerator placement problem (RPP) and the routing with regenerator problem (RRP) in impairment-aware WDM networks, using dedicated path protection. Both the problems have been tackled using linear Integer formulations which can be implemented, using a solver such as the CPLEX. For solving RPP, two solutions have been proposed - i) a formulation that gives optimal solutions which works only for small networks, and ii) a highly effective heuristic which given an optimal solution in 97.5 to 99% of cases for networks having a size up to 60 nodes
Resource Allocation in Survivable WDM Networks Under a Sliding Scheduled Traffic Model
In recent years there has been an increasing number of applications that require periodic use of lightpaths at predefined time intervals, such as database backup and on-line classes. A new traffic model, referred to as the scheduled traffic model, has been proposed to handle such scheduled lightpath demands. In this thesis we present two new integer linear program ( ILP) formulations for the more general sliding scheduled traffic model, where the setup and teardown times may vary within a specified range. We consider both wavelength convertible networks and networks without wavelength conversion capability. Our ILP formulations jointly optimize the problem of scheduling the demands ( in time) and allocating resources for the scheduled lightpaths. Simulation results show that our formulations are able to generate optimal solutions for practical sized networks. For larger networks, we have proposed a fast two-step heuristic to solve the demand scheduling problem and the RWA problem separately
Protection and restoration algorithms for WDM optical networks
Currently, Wavelength Division Multiplexing (WDM) optical networks play a major role in supporting the outbreak in demand for high bandwidth networks driven by the Internet. It can be a catastrophe to millions of users if a single optical fiber is somehow cut off from the network, and there is no protection in the design of the logical topology for a restorative mechanism. Many protection and restoration algorithms are needed to prevent, reroute, and/or reconfigure the network from damages in such a situation. In the past few years, many works dealing with these issues have been reported. Those algorithms can be implemented in many ways with several different objective functions such as a minimization of protection path lengths, a minimization of restoration times, a maximization of restored bandwidths, etc. This thesis investigates, analyzes and compares the algorithms that are mainly aimed to guarantee or maximize the amount of remaining bandwidth still working over a damaged network. The parameters considered in this thesis are the routing computation and implementation mechanism, routing characteristics, recovering computation timing, network capacity assignment, and implementing layer. Performance analysis in terms of the restoration efficiency, the hop length, the percentage of bandwidth guaranteed, the network capacity utilization, and the blocking probability is conducted and evaluated
- …