OFDM Synthetic Aperture Radar Imaging with Sufficient Cyclic Prefix

The existing linear frequency modulated (LFM) (or step frequency) and random noise synthetic aperture radar (SAR) systems may correspond to the frequency hopping (FH) and direct sequence (DS) spread spectrum systems in the past second and third generation wireless communications. Similar to the current and future wireless communications generations, in this paper, we propose OFDM SAR imaging, where a sufficient cyclic prefix (CP) is added to each OFDM pulse. The sufficient CP insertion converts an inter-symbol interference (ISI) channel from multipaths into multiple ISI-free subchannels as the key in a wireless communications system, and analogously, it provides an inter-range-cell interference (IRCI) free (high range resolution) SAR image in a SAR system. The sufficient CP insertion along with our newly proposed SAR imaging algorithm particularly for the OFDM signals also differentiates this paper from all the existing studies in the literature on OFDM radar signal processing. Simulation results are presented to illustrate the high range resolution performance of our proposed CP based OFDM SAR imaging algorithm.Comment: This version has been accepted by IEEE Transactions on Geoscience and Remote Sensing. IEEE Transactions on Geoscience and Remote Sensing 201

Parameters of Communication Systems Based on OFDM-CDMA

Cíl disertační práce leží v oblasti modelování a vyhodnocení bezdrátových komunikačních systémů s dvojrozměrným rozprostíráním signálu a jejich klíčových parametrů v závislosti na vybraných vlastnostech moderního bezdrátového komunikačního řetězce. Výzkumné metody použité v této práci spočívají především ve vývoji softwarového simulátoru pro prostředí Matlab, s jehož pomocí, a s využitím statistického přístupu, jsou navržené algoritmy ověřeny. Dále je použit simulátor fyzické vrstvy dle 3rd Generation Partnership Project Long Term Evolution (3GPP LTE), vyvinutý na Technické univerzitě ve Vídni. Tento představuje ideální platformu pro implementaci metody dvojrozměrného (2D) rozprostírání a její vyhodnocení s přihlédnutím k současným bezdrátovým komunikačním systémům. Zjištění prezentovaná v této práci představují především ověření účinnosti systému nazvaného jako Variable Spreading Factor - Orthogonal Code Frequency Division Multiplex (VSF-OFCDM), který využívá principu 2D rozprostírání signálu a zjištění, že VSF-OFCDM systém překonává systémy využívající Orthogonal Division Frequency Multiplex (OFDM), nebo Code Division Multiple Access (CDMA). Dále byla navržena metoda 2D rozprostírání signálu v systému LTE, kde se též potvrdila její účinnost. Díky účinnějšímu potlačení vlivu rychlé variace přenosového kanálu v závislosti na frekvenci a čase, dosahuje systém VSF-OFCDM znatelně vyšší datové prostupnosti.The focus of this research is in the area of modeling and evaluating of the wireless systems with two dimensional signal spreading, it’s key parameters and dependencies on other features in modern wireless communication chain. The research method adopted in this dissertation includes a development of Matlab based simulators which exploits a statistical approach to show a contribution of proposed algorithms. Furthermore, a model of physical layer of the 3rd Generation Partnership Project Long Term Evolution (3GPP LTE), developed by the Vienna University of Technology, was utilized as a simulation environment suitable for implementation of a two dimensional (2D) signal spreading method and its evaluation as well as comparison of achieved results with the state-of-the-art systems. The findings from this research provide evidence that the Variable Spreading Factor - Orthogonal Code Frequency Division Multiplex (hereafter VSF-OFCDM) employing a 2D spreading is a promising wireless access scheme superior to Orthogonal Division Frequency Multiplex (OFDM) or Code Division Multiple Access (CDMA) and is capable to significantly increase the data rates in wireless transmission due to the capability of such system to effectively cope with fast time and frequency fluctuations in the wireless transmission channel.

Next-generation optical access networks based on Orthogonal Frequency Division Multiplexing

Orthogonal Frequency Division Multiplexing (OFDM) is a robust modulation and multiplexing format which is at the base of many present communication standards. The interest of the OFDM application in optical fiber deployments is quite recent. As the next generation of Passive Optical Networks (NG-PONs) is envisioned, targeting greater capacity and user counts, the limitations of TDMA (Time Division Multiplexing Access) approaches to meet the expected increase in requirements becomes evident and therefore new technologies are being explored. Optical OFDMA is an emerging technology which can be a promising candidate. The main goal of this Master Thesis is to study the problem of users multiplexing in access networks, using OFDM as a technology to transmit the user information data. This work has focused in the uplink study of the network, because it is the most challenging part of the network to design. The studies have been conducted both in a theoretical way and also by simulating the targeted environments by means of a fiber optics transmission simulation tool. Virtual Photonics Integrated (VPI) is the software selected for the simulations. This tool is specially designed to simulate optical transmission system environments. The analysis of the Optical Beat Interference, which is a critical impairment in optical carrier multiplexing schemes, is the most important part of the user multiplexing study

Next-generation optical access networks based on Orthogonal Frequency Division Multiplexing

Orthogonal Frequency Division Multiplexing (OFDM) is a robust modulation and multiplexing format which is at the base of many present communication standards. The interest of the OFDM application in optical fiber deployments is quite recent. As the next generation of Passive Optical Networks (NG-PONs) is envisioned, targeting greater capacity and user counts, the limitations of TDMA (Time Division Multiplexing Access) approaches to meet the expected increase in requirements becomes evident and therefore new technologies are being explored. Optical OFDMA is an emerging technology which can be a promising candidate. The main goal of this Master Thesis is to study the problem of users multiplexing in access networks, using OFDM as a technology to transmit the user information data. This work has focused in the uplink study of the network, because it is the most challenging part of the network to design. The studies have been conducted both in a theoretical way and also by simulating the targeted environments by means of a fiber optics transmission simulation tool. Virtual Photonics Integrated (VPI) is the software selected for the simulations. This tool is specially designed to simulate optical transmission system environments. The analysis of the Optical Beat Interference, which is a critical impairment in optical carrier multiplexing schemes, is the most important part of the user multiplexing study

Next generation passive optical networks based on orthogonal frequency division multiplexing techniques

In recent decades, the industry of communications has acquired huge significance, and nowadays constitutes an essential tool for the society information. Thus, the exponential growth in demand of broadband services and the increasing amount of information to be transmitted have spurred the evolution of the access network infrastructure to effectively meet the user needs in an effective way in terms of costs of both installation and maintenance. Passive optical networks (PON) are currently considered the most efficient and least costly alternative to deploy fiber to the home environment. In order to allow many users simultaneously coexist PONs based on time multiplexing (TDMA) have been developed. Looking ahead, however, it is expected that these techniques do not meet the requirements on access networks. In consequence, other multiple access techniques such as Wavelength Division Multiplexing Access (WDMA) or Orthogonal Frequency Division Multiplexing Access (OFDMA) are currently under study and development for use in the next generation of PONs. Particularly, in recent years OFDM has stood out among the scientific community to be considered a solution with great potential on future implementation of PONs. This is especially true due to the capacity of OFDM to work with multilevel modulations, its high tolerance to chromatic dispersion, and its high flexibility and granularity in terms of bandwidth management. Given the above, the aim of this Thesis is to study deeply the advantages and challenges of implementing the standard OFDM as an access network solution; likewise, it offers solutions to improve its performance. In order to evaluate the main structures and strategies for OFDM-based PON, a comparative analysis of all of them is performed firstly, highlighting their sensitivity levels, maximum range and number of users. A key aspect for network providers is the cost of operation, deployment and maintenance of networks. As a low-cost solution, this Thesis proposes a network model called Statistical-OFDMA-PON based on intensity modulation and direct detection. In addition, dynamic bandwidth management strategies are applied into this model getting an improvement in the power balance which in turn, allows to increase the maximum range and the scalability in number of users. One of the main OFDM problems is the Peak-to-Average Power Ratio (PAPR) which increases with the number of carriers. This thesis proposes a new algorithm based on folding the signal and transmitting auxiliary information in order to compensate the PAPR effect and thus increase the sensitivity of the optical system. On the other hand, OFDMA requires a large number of operations in the digital domain resulting in a high computational effort, which in turn results in an increased cost. For this reason, this Thesis presents a study on the optimization of the required resolution in the Digital-to-Analog / Analog-to-Digital Converters (DAC/ADCs) maintaining the transmission quality. The optimization of the computation time may make the OFDMA-based optical network more attractive for future PONs. Finally, another problem concerning the OFDM optical networks is their sensitivity to Phase Noise (PN). In this regard, this Thesis presents a study of the effect of the laser linewidth and its dependence on signal bandwidth. A mitigation technique based on pilot tones is implemented and the limiting values for the laser linewidth are found to be within the reach of present low-cost light sources.En estas últimas décadas, la industria de las comunicaciones ha adquirido gran importancia y hoy en día, constituye una herramienta imprescindible para el funcionamiento en la sociedad de la información. Así pues, el crecimiento exponencial en la demanda de servicios de banda ancha y la carga de información cada vez mayor que se necesita transmitir ha estimulado la evolución de las infraestructuras del tramo de acceso a la red para poder satisfacer las necesidades del usuario de forma efectiva en términos de costes de instalación y de mantenimiento. Las redes ópticas pasivas (Passive Optical Networks, PON) son actualmente consideradas la alternativa más eficiente y de menor coste para desplegar fibra hasta los hogares. Con el fin de permitir que muchos usuarios coexistan simultáneamente se han desarrollado PONs basadas en multiplexación en tiempo (Time Division Multiplexing Access, TDMA). De cara al futuro, sin embargo, se prevé que estas técnicas no permitan cubrir las exigencias sobre las redes de acceso. En consecuencia, otras técnicas de acceso múltiple al medio como el acceso múltiple por división de longitud de onda (Wavelength Division Multiplexing Access, WDMA) o el acceso múltiple por división de frecuencia ortogonal (Orthogonal Frequency Division Multiplexing Access, OFDMA) se encuentran actualmente en proceso de estudio y desarrollo para su uso en la futura generación de PONs. En concreto, en los últimos años OFDM se ha destacado entre la comunidad científica al considerarse una solución con gran potencial para su futura implantación en redes de acceso pasivas. Esto es especialmente cierto debido a la capacidad que el OFDM para trabajar con modulaciones multinivel, así como su alta tolerancia a la dispersión cromática y a la gran flexibilidad y granularidad que posibilita en términos de gestión del ancho de banda. Por todo lo anterior, el objetivo de esta Tesis es estudiar con profundidad las ventajas y los retos de aplicar el estándar OFDM como solución de red de acceso; del mismo modo, ofrece soluciones para mejorar su rendimiento. Con el objetivo de evaluar las principales estructuras basadas en OFDM-PON, en primer lugar se realiza un análisis comparativo de todas ellas destacando sus niveles de sensibilidad, máximo alcance y número de usuarios. Un aspecto fundamental para los proveedores de red es el coste de operación, despliegue y mantenimiento de las redes. Como solución de bajo coste, esta Tesis propone un modelo de red llamado Statistical-OFDMA-PON que se basa en modulación de intensidad y detección directa. Además, este modelo se completa con estrategias de gestión dinámica del ancho de banda de los usuarios que conforman la estructura de red propuesta consiguiendo una mejora en el balance de potencias que permite aumentar distancia y número de usuarios. Uno de los principales problemas del OFDM es el alto nivel de la relación de potencia de pico a potencia media (Peak-to-Average Power Ratio, PAPR) creciente con el número de portadoras. Esta Tesis propone un nuevo algoritmo basado en el pliegue de la señal y la transmisión de información auxiliar para compensar el efecto del PAPR aumentando así la sensibilidad del sistema óptico. Por otro lado, OFDMA requiere un número elevado de operaciones en el dominio digital resultando en un alto esfuerzo computacional que a su vez se traduce en un aumento del coste. Por esta razón, esta Tesis presenta un estudio sobre la optimización de la resolución requerida en los conversores analógicodigital (Digital-to-Analog/Analog-to-Digital Converters, DAC/ADCs) manteniendo la calidad de transmisión. La optimización del tiempo de cómputo requerido puede dotar de un mayor atractivo la solución de red óptica basada en OFDMA. Finalmente, otro de los problemas que presentan las redes ópticas OFDM es su sensibilidad frente al ruido de fase (Phase Noise, PN). En este aspecto, esta Tesis presenta un estudio del efecto del ancho de línea del láser y su dependencia con el ancho de banda de la señal. Técnicas de mitigación basadas en tonos piloto han sido implementadas y se han encontrado los valores limitantes del ancho de línea dentro del alcance de los láseres de bajo coste

UAV-Enabled Wireless Powered Communication Networks

Unmanned aerial vehicles (UAVs), popularly known as drones, have emerged as a promising solution for providing reliable and cost-effective wireless communications. The use of UAVs as aerial wireless power transmitters (UAV-WPT), with additional flexibility and 3D mobility, is expected to provide efficient wireless power supplies to low-power and hard-to-reach devices. Due to their adjustable altitude and mobility, efficient line-of-sight (LoS) between UAVs and ground nodes (GNs) could be established, thus mitigating signal blockage and shadowing. Based on this feature, UAVs can be good candidates to charge battery-limited or hard-to-reach devices through radio frequency (RF) wireless power transfer (WPT), which will significantly improve the wireless charging efficiency compared to conventional ground charging stations at fixed locations. Although the deployment of UAVs as wireless power transmitters is promising, it comes with many design challenges and reliability problems. For instance, the energy efficiency (EE) of UAVs requires careful consideration as it significantly impacts the performance of UAV-WPT systems. Thus, there is a need for a comprehensive framework to optimize such networks, where the devices are wirelessly powered via UAVs to enable uplink data transmission. In this thesis, we propose a detailed methodology to optimize the performance of the UAV-enabled WPT networks with different topologies and applications. We provide the required steps to be followed for most applicable networks, where specific considerations have to be considered for each case. The optimization problem's solution has two main steps; firstly, the path loss of the air-to-ground channels is minimized by optimizing the UAV position depending on the GNs' service demands. Secondly, using the optimized positioning and a closed-form expression for the EE, a resource allocation aiming to maximize EE is developed using Lagrangian optimization and gradient-descent methods. We present five different system models, which reflect different practical cases and setups considering single and multiple UAV scenarios. These models are: UAV-enabled wireless powered communications network (UAV-WPCN), UAV-enabled wireless information and power transfer network (UAV-WIPT), UAV-enabled simultaneous wireless information and power transfer network (UAV-SWIPT), multiple UAV-enabled wireless powered communications network (UAVs-WPCN), and multiple UAV-enabled simultaneous wireless information and power transfer network (UAVs-SWIPT). The results of applying the proposed scheme show significant enhancement in the EE for the non-orthogonal multiple access (NOMA) scheme compared to the orthogonal multiple access (OMA) scheme in most of the scenarios. However, the topology and distribution of the ground nodes play a vital role in figuring out the suitable access scheme to be used, where OMA or hybrid NOMA/OMA schemes could perform better