Supporting Diverse Customers and Prioritized Traffic in Next-Generation Passive Optical Networks

The already high demand for more bandwidth usage has been growing rapidly. Access network traffic is usually bursty in nature and the present traffic trend is mostly video-dominant. This motivates the need for higher transmission rates in the system. At the same time, the deployment costs and maintenance expenditures have to be reasonable. Therefore, Passive Optical Networks (PON) are considered promising next-generation access technologies. As the existing PON standards are not suitable to support future-PON services and applications, the FSAN (Full Service Access Network) group and the ITU-T (Telecommunication Standardization Sector of the International Telecommunication Union) have worked on developing the NG- PON2 (Next Generation PON 2) standard. Resource allocation is a fundamental task in any PON and it is necessary to have an efficient scheme that reduces delay, maximizes bandwidth usage, and minimizes the resource wastage. A variety of DBA (Dynamic Bandwidth Allocation) and DWBA (Dynamic Wavelength and Bandwidth Allocation) algorithms have been proposed which are based on different PONs (e.g. EPON, GPON, XG-PON, 10G- EPON, etc.). But to our knowledge, no DWBA scheme for NG-PON2 system, with diverse customers and prioritized traffic, has been proposed yet. In this work, this problem is addressed and five different dynamic wavelength and bandwidth allocation (DWBA) schemes are proposed. First, mixed integer linear programming (MILP) models are developed to minimize the total delay of the high priority data. Due to the MILP’s high computational complexity, heuristic algorithms are developed based on the MILP model insights. The five heuristics algorithms are: No Block-Split Heuristic (NBH), Equal Block-Split Heuristic (EBH), Priority Based No Block-Split Heuristic (P-NBH), Priority Based Equal Block-Split Heuristic (P-EBH), and Priority Based Decider Block-Split Heuristic (P-DBH). Six priority classes of requests are introduced with the goal of minimizing the total delay for the high priority data and to lessen the bandwidth wastage of the system. Finally, experiments for the performance evaluation of the five DWBA schemes are conducted. The results show that P-NBH, P-EBH, P-DBH schemes show a 47.63% less delay and 30% of less bandwidth wastage on average for the highest priority data transmission than the schemes without priority support (NBH and EBH). Among these five schemes, NBH method has the highest delay, whereas EBH and P-EBH waste more bandwidth than the other schemes. P-DBH is the most efficient among the five because this scheme offers the lowest delay for high priority data and the minimum bandwidth wastage for lower priority ones. Adviser: Byrav Ramamurth

Mecanismos para gerenciamento de banda passante em redes ópticas passivas Ethernet com clientes locatários de múltiplas unidades ópticas de redes

Orientador: Nelson Luis Saldanha da FonsecaDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de ComputaçãoResumo: As atuais redes de acesso banda larga à Internet necessitam dar suporte às altas demandas de diversas aplicações tais como voz sobre IP (VoIP), streaming de vídeo UHD, videoconferência, internet das coisas (IoT) e jogos interativos. A tecnologia de redes ópticas passivas (PONs) é considerada promissora para fornecer alta capacidade de acesso com um custo-benefício aceitável. Existem duas diferentes tecnologias que disputam o mercado das redes ópticas; Ethernet PON (EPON) e Gigabit Capable PON(GPON). Devido ao alto custo de aquisição e manutenção de uma infraestrutura PON, muitas empresas (clientes) recorrem a fornecedores de infraestrutura (InP) para reduzir os altos custo, por meio do aluguel de uma porção dos recursos da PON. Esses clientes podem ser, por exemplo, operadores de rede móvel ou provedores de serviços virtuais, que podem adquirir múltiplas unidades da rede óptica (ONU) conectadas em uma única PON. Essa facilidade de alugar múltiplas ONUs pode gerar problemas de balanceamento de carga entre ONUs, uma vez que os atuais algoritmos de alocação de banda passante (DBA) são capazes de garantir banda para uma única ONU. Consequentemente, picos de demanda de banda passante podem ultrapassar a banda garantida em algumas ONUs e, ao mesmo tempo, subutilizar a banda garantida em outras ONUs de um mesmo cliente. Nesta dissertação, aborda-se o problema de gerenciamento de largura de banda para clientes multi-ONU nas redes EPON. Propõe-se um algoritmo de alocação dinâmica de banda passante (DBA) (MOS-IPACT) para dar suporte ao contrato de serviço (SLA) para clientes com várias ONUs. O mecanismo proposto distribui a largura de banda agregada entre ONUs de um mesmo cliente, com o objetivo de melhorar a utilização da largura de banda. Além disso propõe-se um algoritmo DBA para EPONs (subMOSIPACT) com o objetivo de garantir banda passante em diferentes níveis de granularidade. Este algoritmo é fundamental para clientes multi-ONU e que oferecem diversos tipos de serviços. Por exemplo, um operador da rede virtual pode alugar as ONUs de um InP para oferecer serviços corporativos e residenciais. Introduz-se, também, um algoritmo DBA para EPONs (coopMOS-IPACT) que permite a cooperação entre clientes. O algoritmo proposto permite que clientes cooperativos compartilhem banda passante não utilizada a fim de aumentar a banda disponível para alocação mas sem afetar seus SLAs individuais. Os resultados mostram que os três algoritmos propostos são capazes de garantir banda passante para clientes multi-ONU, mesmo em condições de tráfego desbalanceadas; Além de garantir banda passante em diferentes níveis de granularidade aumentando o suporte aos requisitos de qualidade de serviço (QoS). Resultados derivados por simulação mostraram que os algoritmos distribuem eficientemente a largura de banda entre os clientes multi-ONU bem como para clientes convencionais que possuem uma única ONU. Por fim, este trabalho mostra os benefícios do modelo de clientes cooperativos para aumentar a largura de banda disponívelAbstract: Current broadband access networks need to support the Quality of Service (QoS) requirements of diverse application such as voice over IP (VoIP), ultra-high video streaming, video conferencing, Internet of Things (IoT) and interactive gaming. Passive Optical Networks (PONs) is considered a promising solution to provides high access capacity with acceptable cost-benefit. Two different technologies share the optical access networks market: Ethernet PON (EPON) and Gigabit Capable PON (GPON). However, the deployment of PON infrastructure involves significant costs. On the other hand, Infrastructure Provider (InP) can alleviate these costs by leasing their PONs to several enterprises (customers). These customers can be Mobile Network Operators (MNOs), multi-site enterprises, or virtual service providers. New scenarios are envisioned in which customers owning multiple Optical Network Units (ONUs) (multi-ONUs customers) are connected to a single PON. However, current EPON Dynamic Bandwidth Allocation (DBA) algorithms are able to support only guaranteed bandwidth for individual ONUs. Consequently, peaks of bandwidth demand may surpass the guaranteed bandwidth for some ONUs and, at the same time, underutilize the bandwidth in other ONUs of a multi-ONU customer. In this work, the bandwidth management problem for multi-ONU customers in EPON network is addressed. This dissertation proposes a mechanisms for the support of multiONU Service Level Agreements (SLA) in DBA algorithms for EPONs. The proposed DBA algorithms (MOS-IPACT) allows customers owning multiple ONUs to redistribute the aggregated bandwidth of the group of ONUs to better balance the bandwidth utilization. This dissertation also proposes a DBA algorithm for EPON networks (subMOS-IPACT) with the objective of assuring bandwidth at different levels of granularity. This algorithm is quite important for multi-ONU customers offering diverse type of services. For example, a virtual network operator can lease ONUs from an InP to offer enterprise and residential services to its client.This work also introduce a DBA algorithm for EPONs (coopMOS-IPACT), which allows cooperation between customers. The proposed DBA algorithm allows cooperative customers share the unused bandwidth without affecting their individual multi-ONU SLAs. Results show that the three proposed Dynamic Bandwidth Allocation (DBA) algorithms are able to guarantee bandwidth for multi-Optical Network Unit (ONU) customers even in unbalancing traffic conditions. Furthermore, assuring bandwidth at different levels of granularity improves the Quality of Service (QoS) providing. Simulation results showed that the mechanisms efficiently distributes bandwidth between multi-ONU customers and traditional customers owning a single ONU. Finally, this work show the benefits of cooperative customers model in order to increase the available bandwidthMestradoCiência da ComputaçãoMestre em Ciência da Computação132308/2016-9CNP

Dynamic bandwidth management with service differentiation over ethernet passive optical networks

Ethernet passive optical networks (EPONs) address the first mile of the communication infrastructure between the service provider central offices and the customer sites. As a low-cost, high speed technology, EPONs are deemed as the solution to the bottleneck problem of the broadband access network. A major feature of EPONs is the utility of a shared upstream channel among the end users. Only a single optical network unit (GNU) may transmit during a timeslot to avoid data collisions. In order to provide diverse quality of service (QoS), the bandwidth management of the upstream channel is essential for the successful implementation of EPONs, and thus, an efficient medium access control is required to facilitate statistical multiplexing among local traffics. This dissertation addresses the upstream bandwidth allocation over EPONs. An efficient mechanism, i.e., limited sharing with traffic prediction (LSTP), has been proposed to arbitrate the upstream bandwidth among ONUs. The MultiPoint Control Protocol (MPCP) messages, which are stipulated by the IEEE 802.3ah Ethernet in the First Mile (EFM) Task Force, are adopted by LSTP to facilitate the dynamic bandwidth negotiation between an GNU and the OLT. The bandwidth requirement of an ONU includes the already enqueued frames and the predicted incoming frames during the waiting time. The OLT arbitrates the bandwidth assignment based on the queue status report from an GNU, the traffic prediction, and the agreed service contract. With respect to the performance evaluation, theoretical analysis on the frame loss, the frame delay, and the queue length has been conducted. The quantitative results demonstrate that 1) the innovative LSTP mechanism dynamically allocates the upstream bandwidth among multiple ONUs; 2) the traffic predictor at the OLT delivers satisfactory prediction for the bursty self-similar traffic, and thereby, contributing to the reduction of frame loss, frame delay, and queue length; and 3) the bandwidth arbitration at the OLT effectively restricts the aggressive bandwidth competition among ONUs by adopting the service level agreement (SLA) parameter as the upper bound. Aside from analysis, the LSTP mechanism has been substantiated by experimental simulations. In order to differentiate the service provisioning among diverse users, LSTP is further enhanced with the support of dynamic bandwidth negotiation based on multiple queues. The incoming traffics are first classified into three classes, and then enqueued into the corresponding queues. A traffic predictor is dedicated to one class of traffic from an GNU. Service differentiation among classes are provided by the combination of queuing and scheduling at the GNU side. At the OLT side, the bandwidth allocation for each class of traffic is based on the reported queue status and the traffic prediction, and is upper-bounded by the SLA parameter. Experimental simulations have justified the feasibility of providing service differentiation over the broadband EPONs

A QoS-Aware Dynamic Bandwidth Allocation algorithm for passive optical networks with non-zero laser tuning time

The deployment of new 5G services and future demands for 6G make it necessary to increase the performance of access networks. This challenge has prompted the development of new standardization proposals for Passive Optical access Networks (PONs) that offer greater bandwidth, greater reach and a higher rate of aggregation of users per fiber, being Time- and Wavelength-Division Multiplexing (TWDM) a promising technological solution for increasing the capacity by up to 40 Gbps by using several wavelengths. This solution introduces tunable transceivers into the Optical Network Units (ONUs) for switching from one wavelength to the other, thus addressing the ever-increasing bandwidth demands in residential broadband and mobile fronthaul networks based on Fiber to the Home (FTTH) technology. This adds complexity and sources of inefficiency, such as the laser tuning time (LTT) delay, which is often ignored when evaluating the performance of Dynamic Bandwidth Allocation (DBA) mechanisms. We present a novel DBA algorithm that dynamically handles the allocation of bandwidth and switches the ONUs’ lasers from one wavelength to the other while taking LTT into consideration. To optimize the packet delay, we introduce a scheduling mechanism that follows the Longest Processing Time first (LPT) scheduling discipline, which is implemented over the Interleaved Polling with Adaptive Cycle Time (IPACT) DBA. We also provide quality of service (QoS) differentiation by introducing the Max-Min Weighted Fair Share Queuing principle (WFQ) into the algorithm. The performance of our algorithm is evaluated through simulations against the original IPACT algorithm, which we have extended to support multi-wavelengths. With the introduction of LPT, we obtain an improved performance of up to 73% reduction in queue delay over IPACT while achieving QoS differentiation with WFQ.This work has been supported by the Agencia Estatal de Investigación of Spain under project PID2019‐108713RB‐C51/AEI/10.13039/501100011033.Peer ReviewedObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i InfraestructuraObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.1 - Desenvolupar infraestructures fiables, sostenibles, resilients i de qualitat, incloent infraestructures regionals i transfrontereres, per tal de donar suport al desenvolupament econòmic i al benestar humà, amb especial atenció a l’accés assequible i equitatiu per a totes les personesObjectius de Desenvolupament Sostenible::9 - Indústria, Innovació i Infraestructura::9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambiental­ment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectivesPostprint (published version

Provisioning Quality of Service of Wireless Telemedicine for E-Health Services: A Review

In general, on-line medical consultation reduces time required for medical consultation and induces improvement in the quality and efficiency of healthcare services. The scope of study includes several key features of present day e-health applications such as X-ray, ECG, video, diagnosis images and other common applications. Moreover, the provision of Quality of Service (QoS) in terms of specific medical care services in e-health, the priority set for e-health services and the support of QoS in wireless networks and techniques or methods aimed at IEEE 802.11 to secure the provision of QoS has been assessed as well. In e-health, medical services in remote places which include rustic healthcare centres, ships, ambulances and home healthcare services can be supported through the applications of e-health services such as medical databases, electronic health data and the transferring of text, video, sound and images. Given this, a proposal has been made for a multiple service wireless networking with multiple sets of priorities. In relation to the terms of an acceptable QoS level by the customers of e-health services, prioritization is an important criterion in a multi-traffic network. The requirement for QoS in medical networking of wireless broadband has paved the way for bandwidth prerequisites and the live transmission or real-time medical applications. The proposed wireless network is capable of handling medical applications for both normal and life-threatening conditions as characterized by the level of emergencies. In addition, the allocation of bandwidth and the system that controls admittance designed based on IEEE 802.16 especially for e-health services or wireless telemedicine will be discussed in this study. It has been concluded that under busy traffic conditions, the proposed architecture can used as a feasible and reliable infrastructure network for telemedicine

A Review on Provisioning Quality of Service of Wireless Telemedicine for E-Health Services

In general, on-line medical consultation reduces time required for medical consultation induces improvement in the quality and efficiency of healthcare services. All major types of current e-health applications such as ECG, X-ray, video, diagnosis images and other common applications have been included in the scope of the study. In addition, the provision of Quality of Service (QoS) for the application of specific healthcare services in e-health, the scheme of priority for e-health services and the support of QoS in wireless networks and techniques or methods for IEEE 802.11 to guarantee the provision of QoS has also been assessed. In e-health, medical services in remote locations such as rural healthcare centers, ambulances, ships as well as home healthcare services can be supported through the applications of e-health services such as medical databases, electronic health records and the routing of text, audio, video and images. Given this, an adaptive resource allocation for a wireless network with multiple service types and multiple priorities have been proposed. For the provision of an acceptable QoS level to users of e-health services, prioritization is an important criterion in a multi-traffic network. The requirement for QoS provisioning in wireless broadband medical networks have paved the pathway for bandwidth requirements and the real-time or live transmission of medical applications. From the study, good performance of the proposed scheme has been validated by the results obtained. The proposed wireless network is capable of handling medical applications for both normal and life-threatening conditions as characterized by the level of emergencies. In addition, the bandwidth allocation and admission control algorithm for IEEE 802.16- based design specifically for wireless telemedicine/e-health services have also been presented in the study. It has been concluded that under busy traffic conditions, the proposed architecture can used as a feasible and reliable infrastructure network for telemedicine

Network Rules

Crawford compares the debate between the telcos and the online companies over broadband access regimes often called the network neutrality debate to the ongoing tussle between intellectual property maximalists and free culture advocates which are strikingly parallel sets of arguments. The maximalists claim that creativity comes from lone genuises (the romantic author) who must be given legal incentives to works but intellectual property scholars have carefully examined the incentives of their arguments and have pointed out that granting overly strong property rights to copyright holders might not be socially appropriate. Moreover, the network providers claim that they (the romantic builders) must be allowed by law to price-discriminate vis-a-vis content sources in order to be encouraged to build the network

View on 5G Architecture: Version 1.0

The current white paper focuses on the produced results after one year research mainly from 16 projects working on the abovementioned domains. During several months, representatives from these projects have worked together to identify the key findings of their projects and capture the commonalities and also the different approaches and trends. Also they have worked to determine the challenges that remain to be overcome so as to meet the 5G requirements. The goal of 5G Architecture Working Group is to use the results captured in this white paper to assist the participating projects achieve a common reference framework. The work of this working group will continue during the following year so as to capture the latest results to be produced by the projects and further elaborate this reference framework. The 5G networks will be built around people and things and will natively meet the requirements of three groups of use cases: • Massive broadband (xMBB) that delivers gigabytes of bandwidth on demand • Massive machine-type communication (mMTC) that connects billions of sensors and machines • Critical machine-type communication (uMTC) that allows immediate feedback with high reliability and enables for example remote control over robots and autonomous driving. The demand for mobile broadband will continue to increase in the next years, largely driven by the need to deliver ultra-high definition video. However, 5G networks will also be the platform enabling growth in many industries, ranging from the IT industry to the automotive, manufacturing industries entertainment, etc. 5G will enable new applications like for example autonomous driving, remote control of robots and tactile applications, but these also bring a lot of challenges to the network. Some of these are related to provide low latency in the order of few milliseconds and high reliability compared to fixed lines. But the biggest challenge for 5G networks will be that the services to cater for a diverse set of services and their requirements. To achieve this, the goal for 5G networks will be to improve the flexibility in the architecture. The white paper is organized as follows. In section 2 we discuss the key business and technical requirements that drive the evolution of 4G networks into the 5G. In section 3 we provide the key points of the overall 5G architecture where as in section 4 we elaborate on the functional architecture. Different issues related to the physical deployment in the access, metro and core networks of the 5G network are discussed in section 5 while in section 6 we present software network enablers that are expected to play a significant role in the future networks. Section 7 presents potential impacts on standardization and section 8 concludes the white paper