27 research outputs found

    Semiblind Channel Estimation and Data Detection for OFDM Systems With Optimal Pilot Design

    Get PDF
    This paper considers semiblind channel estimation and data detection for orthogonal frequency-division multiplexing (OFDM) over frequency-selective fading channels. We show that the samples of an OFDM symbol are jointly complex Gaussian distributed, where the mean and covariance are determined by the locations and values of fixed pilot symbols. We exploit this distribution to derive a novel maximum-likelihood (ML) semiblind gradient-descent channel estimator. By exploiting the channel impulse response (CIR) statistics, we also derive a semiblind data detector for both Rayleigh and Ricean fading channels. Furthermore, we develop an enhanced data detector, which uses the estimator error statistics to mitigate the effect of channel estimation errors. Efficient implementation of both the semiblind and the improved data detectors is provided via sphere decoding and nulling-canceling detection. We also derive the Cramér-Rao bound (CRB) and design optimal pilots by minimizing the CRB. Our proposed channel estimator and data detector exhibit high bandwidth efficiency (requiring only a few pilot symbols), achieve the CRB, and also nearly reach the performance of an ideal reference receiver

    A Semi-Blind Pilot-Assisted Channel Estimation Algorithm in OFDM Systems

    Get PDF
    In this paper we study a new semi-blind channel estimation algorithm in orthogonal frequency division multiplexing (OFDM) systems. The proposed scheme is an extension of a recently reported subspace-based blind channel estimation algorithm in cyclic prefix systems which requires very few received blocks. The semi-blind estimation algorithm is devised by using the information obtained both from the blind channel estimation method and a pure pilot-assisted method. The proposed algorithm uses a small amount of received data and can be applied to any types of communication constellations. Simulation results show that, with the same number of pilot samples, the semi-blind algorithm has a clear improvement in system performance over the pure pilot-assisted method. To achieve the same bit- error-rate performance, the proposed semi-blind algorithm uses fewer pilot samples

    Joint data detection and channel estimation for OFDM systems

    Get PDF
    We develop new blind and semi-blind data detectors and channel estimators for orthogonal frequency-division multiplexing (OFDM) systems. Our data detectors require minimizing a complex, integer quadratic form in the data vector. The semi-blind detector uses both channel correlation and noise variance. The quadratic for the blind detector suffers from rank deficiency; for this, we give a low-complexity solution. Avoiding a computationally prohibitive exhaustive search, we solve our data detectors using sphere decoding (SD) and V-BLAST and provide simple adaptations of the SD algorithm. We consider how the blind detector performs under mismatch, generalize the basic data detectors to nonunitary constellations, and extend them to systems with pilots and virtual carriers. Simulations show that our data detectors perform well

    Subspace-Based Blind Channel Identification for Cyclic Prefix Systems Using Few Received Blocks

    Get PDF
    In this paper, a novel generalization of subspace-based blind channel identification methods in cyclic prefix (CP) systems is proposed. For the generalization, a new system parameter called repetition index is introduced whose value is unity for previously reported special cases. By choosing a repetition index larger than unity, the number of received blocks needed for blind identification is significantly reduced compared to all previously reported methods. This feature makes the method more realistic especially in wireless environments where the channel state is usually fast-varying. Given the number of received blocks available, the minimum value of repetition index is derived. Theoretical limit allows the proposed method to perform blind identification using only three received blocks in absence of noise. In practice, the number of received blocks needed to yield a satisfactory bit-error-rate (BER) performance is usually on the order of half the block size. Simulation results not only demonstrate the capability of the algorithm to perform blind identification using fewer received blocks, but also show that in some cases system performance can be improved by choosing a repetition index larger than needed. Simulation of the proposed method over time-varying channels clearly demonstrates the improvement over previously reported methods

    Signal-perturbation-free semi-blind channel estimation for MIMO-OFDM systems

    Get PDF
    Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) has been considered as a strong candidate for the beyond 3G (B3G) wireless communication systems, due to its high data-rate wireless transmission performance. It is well known that the advantages promised by MIMO-OFDM systems rely on the precise knowledge of the channel state information (CSI). In real wireless environments, however, the channel condition is unknown. Therefore, channel estimation is of crucial importance in MIMO-OFDM systems. Semi-blind channel estimation as a combination of the training-based or pilot-assisted method and the pure blind approach is considered to be a feasible solution for practical wireless systems due to its better estimation accuracy as well as spectral efficiency. In this thesis, we address the semi-blind channel estimation issue of MIMO-OFDM systems with an objective to develop very efficient channel estimation approaches. In the first part of the dissertation, several nulling-based semi-blind approaches are presented for the estimation of time-domain MIMO-OFDM channels. By incorporating a blind constraint that is derived from MIMO linear prediction (LP) into a training-based least-square method, a semi-blind solution for the time-domain channel estimation is first obtained. It is revealed through a perturbation analysis that the semi-blind solution is not subject to signal perturbation and therefore is superior to pure blind estimation methods. The LP-based semi-blind method is then extended for the channel estimation of MIMO-OFDM systems with pulse-shaping. By exploiting the pulse-shaping filter in the transmitter and the matched filter in the receiver, a very efficient semi-blind approach is developed for the estimation of sampling duration based multipath channels. A frequency-domain correlation matrix estimation algorithm is also presented to facilitate the computation of time-domain second-order statistics required in the LP-based method. The nulling-based semi-blind estimation issue of sparse MIMO-OFDM channels is also addressed. By disclosing and using a relationship between the positions of the most significant taps (MST) of the sparse channel and the lags of nonzero correlation matrices of the received signal, a novel estimation approach consisting of the MST detection and the sparse channel estimation, both in a semi-blind fashion, is developed. An intensive simulation study of all the proposed nulling-based methods with comparison to some existing techniques is conducted, showing a significant superiority of the new methodologies. The second part of the dissertation is dedicated to the development of two signal-perturbation-free (SPF) semi-blind channel estimation algorithms based on a novel transmit scheme that bears partial information of the second-order statistics of the transmitted signal to receiver. It is proved that the new transmit scheme can completely cancel the signal perturbation error in the noise-free case, thereby improving largely the estimation accuracy of correlation matrix for channel estimation in noisy conditions. It is also shown that the overhead caused by the transmission of the 8PF data is negligible as compared to that of regular pilot signals. By using the proposed transmit scheme, a whitening rotation (WR)-based algorithm is first developed for frequency-domain MIMO-OFDM channel estimation. It is shown through both theoretical analysis and simulation study that the new WR-based algorithm significantly outperforms the conventional WR-based method and the nulling-based semi-blind method. By using MIMO linear prediction, the new WR-based algorithm utilizing the 8PF transmit scheme is then extended for time-domain MIMO-OFDM channel estimation. Computer simulations show that the proposed signal-perturbation-free LP-based semi-blind solution performs much better than the LP semi-blind method without using the proposed transmit scheme, the LS method as well as the nulling-based semi-blind method in terms of the MSE of the channel estimate

    Joint Frequency Offset and Channel Estimation for OFDM Systems Using Pilot Symbols and Virtual Carriers

    Full text link

    Subspace-Based Blind Channel Identification for Cyclic Prefix Systems Using Few Received Blocks

    Full text link

    Transmitter precoding and code-sharing techniques using block transmission system [TK1-9971].

    Get PDF
    Dewasa ini, perkhidmatan komunikasi bergerak telah meledak dengan begitu pantas sekali dalam masyarakat kita. Kesemua sistem komunikasi selular yang ada kini menggunakan teknologi digital. Recently, mobile communications services are penetrating into our society at an explosive growth rate. All of the current cellular communication systems have adopted digital technology

    Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

    Get PDF
    Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions
    corecore