Joint data detection and channel estimation for OFDM systems

We develop new blind and semi-blind data detectors and channel estimators for orthogonal frequency-division multiplexing (OFDM) systems. Our data detectors require minimizing a complex, integer quadratic form in the data vector. The semi-blind detector uses both channel correlation and noise variance. The quadratic for the blind detector suffers from rank deficiency; for this, we give a low-complexity solution. Avoiding a computationally prohibitive exhaustive search, we solve our data detectors using sphere decoding (SD) and V-BLAST and provide simple adaptations of the SD algorithm. We consider how the blind detector performs under mismatch, generalize the basic data detectors to nonunitary constellations, and extend them to systems with pilots and virtual carriers. Simulations show that our data detectors perform well

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

Estimation and detection techniques for doubly-selective channels in wireless communications

A fundamental problem in communications is the estimation of the channel. The signal transmitted through a communications channel undergoes distortions so that it is often received in an unrecognizable form at the receiver. The receiver must expend significant signal processing effort in order to be able to decode the transmit signal from this received signal. This signal processing requires knowledge of how the channel distorts the transmit signal, i.e. channel knowledge. To maintain a reliable link, the channel must be estimated and tracked by the receiver. The estimation of the channel at the receiver often proceeds by transmission of a signal called the 'pilot' which is known a priori to the receiver. The receiver forms its estimate of the transmitted signal based on how this known signal is distorted by the channel, i.e. it estimates the channel from the received signal and the pilot. This design of the pilot is a function of the modulation, the type of training and the channel. [Continues.

BLIND CHANNEL ESTIMATION ENHANCEMENT FOR MIMO-OFDM SYSTEMS UNDER HIGH MOBILITY CONDITIONS

ABSTRACT In this paper, we propose an enhancement of a blind channel estimator based on a subspace approach in a MIMO OFDM context (Multi Input Multi Output Orthogonal Frequency Division Multiplexing

Theoretical Performance Bound of Uplink Channel Estimation Accuracy in Massive MIMO

In this paper, we present a new performance bound for uplink channel estimation (CE) accuracy in the Massive Multiple Input Multiple Output (MIMO) system. The proposed approach is based on noise power prediction after the CE unit. Our method outperforms the accuracy of a well-known Cramer-Rao lower bound (CRLB) due to considering more statistics since performance strongly depends on a number of channel taps and power ratio between them. Simulation results are presented for the non-line of sight (NLOS) 3D-UMa model of 5G QuaDRiGa 2.0 channel and compared with CRLB and state-of-the-art CE algorithms.Comment: accepted for presentation in a poster session at the ICASSP 2020 conferenc

Signal-perturbation-free semi-blind channel estimation for MIMO-OFDM systems

Multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) has been considered as a strong candidate for the beyond 3G (B3G) wireless communication systems, due to its high data-rate wireless transmission performance. It is well known that the advantages promised by MIMO-OFDM systems rely on the precise knowledge of the channel state information (CSI). In real wireless environments, however, the channel condition is unknown. Therefore, channel estimation is of crucial importance in MIMO-OFDM systems. Semi-blind channel estimation as a combination of the training-based or pilot-assisted method and the pure blind approach is considered to be a feasible solution for practical wireless systems due to its better estimation accuracy as well as spectral efficiency. In this thesis, we address the semi-blind channel estimation issue of MIMO-OFDM systems with an objective to develop very efficient channel estimation approaches. In the first part of the dissertation, several nulling-based semi-blind approaches are presented for the estimation of time-domain MIMO-OFDM channels. By incorporating a blind constraint that is derived from MIMO linear prediction (LP) into a training-based least-square method, a semi-blind solution for the time-domain channel estimation is first obtained. It is revealed through a perturbation analysis that the semi-blind solution is not subject to signal perturbation and therefore is superior to pure blind estimation methods. The LP-based semi-blind method is then extended for the channel estimation of MIMO-OFDM systems with pulse-shaping. By exploiting the pulse-shaping filter in the transmitter and the matched filter in the receiver, a very efficient semi-blind approach is developed for the estimation of sampling duration based multipath channels. A frequency-domain correlation matrix estimation algorithm is also presented to facilitate the computation of time-domain second-order statistics required in the LP-based method. The nulling-based semi-blind estimation issue of sparse MIMO-OFDM channels is also addressed. By disclosing and using a relationship between the positions of the most significant taps (MST) of the sparse channel and the lags of nonzero correlation matrices of the received signal, a novel estimation approach consisting of the MST detection and the sparse channel estimation, both in a semi-blind fashion, is developed. An intensive simulation study of all the proposed nulling-based methods with comparison to some existing techniques is conducted, showing a significant superiority of the new methodologies. The second part of the dissertation is dedicated to the development of two signal-perturbation-free (SPF) semi-blind channel estimation algorithms based on a novel transmit scheme that bears partial information of the second-order statistics of the transmitted signal to receiver. It is proved that the new transmit scheme can completely cancel the signal perturbation error in the noise-free case, thereby improving largely the estimation accuracy of correlation matrix for channel estimation in noisy conditions. It is also shown that the overhead caused by the transmission of the 8PF data is negligible as compared to that of regular pilot signals. By using the proposed transmit scheme, a whitening rotation (WR)-based algorithm is first developed for frequency-domain MIMO-OFDM channel estimation. It is shown through both theoretical analysis and simulation study that the new WR-based algorithm significantly outperforms the conventional WR-based method and the nulling-based semi-blind method. By using MIMO linear prediction, the new WR-based algorithm utilizing the 8PF transmit scheme is then extended for time-domain MIMO-OFDM channel estimation. Computer simulations show that the proposed signal-perturbation-free LP-based semi-blind solution performs much better than the LP semi-blind method without using the proposed transmit scheme, the LS method as well as the nulling-based semi-blind method in terms of the MSE of the channel estimate

Mitigating Smart Jammers in Multi-User MIMO

Wireless systems must be resilient to jamming attacks. Existing mitigation methods based on multi-antenna processing require knowledge of the jammer's transmit characteristics that may be difficult to acquire, especially for smart jammers that evade mitigation by transmitting only at specific instants. We propose a novel method to mitigate smart jamming attacks on the massive multi-user multiple-input multiple-output (MU-MIMO) uplink which does not require the jammer to be active at any specific instant. By formulating an optimization problem that unifies jammer estimation and mitigation, channel estimation, and data detection, we exploit that a jammer cannot change its subspace within a coherence interval. Theoretical results for our problem formulation show that its solution is guaranteed to recover the users' data symbols under certain conditions. We develop two efficient iterative algorithms for approximately solving the proposed problem formulation: MAED, a parameter-free algorithm which uses forward-backward splitting with a box symbol prior, and SO-MAED, which replaces the prior of MAED with soft-output symbol estimates that exploit the discrete transmit constellation and which uses deep unfolding to optimize algorithm parameters. We use simulations to demonstrate that the proposed algorithms effectively mitigate a wide range of smart jammers without a priori knowledge about the attack type.Comment: arXiv admin note: text overlap with arXiv:2201.0877

MIMO signal processing in offset-QAM based filter bank multicarrier systems

Next-generation communication systems have to comply with very strict requirements for increased flexibility in heterogeneous environments, high spectral efficiency, and agility of carrier aggregation. This fact motivates research in advanced multicarrier modulation (MCM) schemes, such as filter bank-based multicarrier (FBMC) modulation. This paper focuses on the offset quadrature amplitude modulation (OQAM)-based FBMC variant, known as FBMC/OQAM, which presents outstanding spectral efficiency and confinement in a number of channels and applications. Its special nature, however, generates a number of new signal processing challenges that are not present in other MCM schemes, notably, in orthogonal-frequency-division multiplexing (OFDM). In multiple-input multiple-output (MIMO) architectures, which are expected to play a primary role in future communication systems, these challenges are intensified, creating new interesting research problems and calling for new ideas and methods that are adapted to the particularities of the MIMO-FBMC/OQAM system. The goal of this paper is to focus on these signal processing problems and provide a concise yet comprehensive overview of the recent advances in this area. Open problems and associated directions for future research are also discussed.Peer ReviewedPostprint (author's final draft