Camera positioning for 3D panoramic image rendering

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.Virtual camera realisation and the proposition of trapezoidal camera architecture are the two broad contributions of this thesis. Firstly, multiple camera and their arrangement constitute a critical component which affect the integrity of visual content acquisition for multi-view video. Currently, linear, convergence, and divergence arrays are the prominent camera topologies adopted. However, the large number of cameras required and their synchronisation are two of prominent challenges usually encountered. The use of virtual cameras can significantly reduce the number of physical cameras used with respect to any of the known camera structures, hence adequately reducing some of the other implementation issues. This thesis explores to use image-based rendering with and without geometry in the implementations leading to the realisation of virtual cameras. The virtual camera implementation was carried out from the perspective of depth map (geometry) and use of multiple image samples (no geometry). Prior to the virtual camera realisation, the generation of depth map was investigated using region match measures widely known for solving image point correspondence problem. The constructed depth maps have been compare with the ones generated using the dynamic programming approach. In both the geometry and no geometry approaches, the virtual cameras lead to the rendering of views from a textured depth map, construction of 3D panoramic image of a scene by stitching multiple image samples and performing superposition on them, and computation of virtual scene from a stereo pair of panoramic images. The quality of these rendered images were assessed through the use of either objective or subjective analysis in Imatest software. Further more, metric reconstruction of a scene was performed by re-projection of the pixel points from multiple image samples with a single centre of projection. This was done using sparse bundle adjustment algorithm. The statistical summary obtained after the application of this algorithm provides a gauge for the efficiency of the optimisation step. The optimised data was then visualised in Meshlab software environment, hence providing the reconstructed scene. Secondly, with any of the well-established camera arrangements, all cameras are usually constrained to the same horizontal plane. Therefore, occlusion becomes an extremely challenging problem, and a robust camera set-up is required in order to resolve strongly the hidden part of any scene objects. To adequately meet the visibility condition for scene objects and given that occlusion of the same scene objects can occur, a multi-plane camera structure is highly desirable. Therefore, this thesis also explore trapezoidal camera structure for image acquisition. The approach here is to assess the feasibility and potential of several physical cameras of the same model being sparsely arranged on the edge of an efficient trapezoid graph. This is implemented both Matlab and Maya. The quality of the depth maps rendered in Matlab are better in Quality

Biometrics

Biometrics-Unique and Diverse Applications in Nature, Science, and Technology provides a unique sampling of the diverse ways in which biometrics is integrated into our lives and our technology. From time immemorial, we as humans have been intrigued by, perplexed by, and entertained by observing and analyzing ourselves and the natural world around us. Science and technology have evolved to a point where we can empirically record a measure of a biological or behavioral feature and use it for recognizing patterns, trends, and or discrete phenomena, such as individuals' and this is what biometrics is all about. Understanding some of the ways in which we use biometrics and for what specific purposes is what this book is all about

Foreground detection of video through the integration of novel multiple detection algorithims

This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel UniversityThe main outcomes of this research are the design of a foreground detection algorithm, which is more accurate and less time consuming than existing algorithms. By the term accuracy we mean an exact mask (which satisfies the respective ground truth value) of the foreground object(s). Motion detection being the prior component of foreground detection process can be achieved via pixel based and block based methods, both of which have their own merits and disadvantages. Pixel based methods are efficient in terms of accuracy but a time consuming process, so cannot be recommended for real time applications. On the other hand block based motion estimation has relatively less accuracy but consumes less time and is thus ideal for real-time applications. In the first proposed algorithm, block based motion estimation technique is opted for timely execution. To overcome the issue of accuracy another morphological based technique was adopted called opening-and-closing by reconstruction, which is a pixel based operation so produces higher accuracy and requires lesser time in execution. Morphological operation opening-and-closing by reconstruction finds the maxima and minima inside the foreground object(s). Thus this novel simultaneous process compensates for the lower accuracy of block based motion estimation. To verify the efficiency of this algorithm a complex video consisting of multiple colours, and fast and slow motions at various places was selected. Based on 11 different performance measures the proposed algorithm achieved an average accuracy of more than 24.73% than four of the well-established algorithms. Background subtraction, being the most cited algorithm for foreground detection, encounters the major problem of proper threshold value at run time. For effective value of the threshold at run time in background subtraction algorithm, the primary component of the foreground detection process, motion is used, in this next proposed algorithm. For the said purpose the smooth histogram peaks and valley of the motion were analyzed, which reflects the high and slow motion areas of the moving object(s) in the given frame and generates the threshold value at run time by exploiting the values of peaks and valley. This proposed algorithm was tested using four recommended video sequences including indoor and outdoor shoots, and were compared with five high ranked algorithms. Based on the values of standard performance measures, the proposed algorithm achieved an average of more than 12.30% higher accuracy results

Adaptive reservation of network resources according to video classification scenes

Video quality evaluation needs a combined approach that includes subjective and objective metrics, testing, and monitoring of the network. This paper deals with the novel approach of mapping quality of service (QoS) to quality of experience (QoE) using QoE metrics to determine user satisfaction limits, and applying QoS tools to provide the minimum QoE expected by users. Our aim was to connect objective estimations of video quality with the subjective estimations. A comprehensive tool for the estimation of the subjective evaluation is proposed. This new idea is based on the evaluation and marking of video sequences using the sentinel flag derived from spatial information (SI) and temporal information (TI) in individual video frames. The authors of this paper created a video database for quality evaluation, and derived SI and TI from each video sequence for classifying the scenes. Video scenes from the database were evaluated by objective and subjective assessment. Based on the results, a new model for prediction of subjective quality is defined and presented in this paper. This quality is predicted using an artificial neural network based on the objective evaluation and the type of video sequences defined by qualitative parameters such as resolution, compression standard, and bitstream. Furthermore, the authors created an optimum mapping function to define the threshold for the variable bitrate setting based on the flag in the video, determining the type of scene in the proposed model. This function allows one to allocate a bitrate dynamically for a particular segment of the scene and maintains the desired quality. Our proposed model can help video service providers with the increasing the comfort of the end users. The variable bitstream ensures consistent video quality and customer satisfaction, while network resources are used effectively. The proposed model can also predict the appropriate bitrate based on the required quality of video sequences, defined using either objective or subjective assessment.Web of Science216art. no. 194

Image usefulness of compressed surveillance footage with different scene contents

The police use both subjective (i.e. police staff) and automated (e.g. face recognition systems) methods for the completion of visual tasks (e.g person identification). Image quality for police tasks has been defined as the image usefulness, or image suitability of the visual material to satisfy a visual task. It is not necessarily affected by any artefact that may affect the visual image quality (i.e. decrease fidelity), as long as these artefacts do not affect the relevant useful information for the task. The capture of useful information will be affected by the unconstrained conditions commonly encountered by CCTV systems such as variations in illumination and high compression levels. The main aim of this thesis is to investigate aspects of image quality and video compression that may affect the completion of police visual tasks/applications with respect to CCTV imagery. This is accomplished by investigating 3 specific police areas/tasks utilising: 1) the human visual system (HVS) for a face recognition task, 2) automated face recognition systems, and 3) automated human detection systems. These systems (HVS and automated) were assessed with defined scene content properties, and video compression, i.e. H.264/MPEG-4 AVC. The performance of imaging systems/processes (e.g. subjective investigations, performance of compression algorithms) are affected by scene content properties. No other investigation has been identified that takes into consideration scene content properties to the same extend. Results have shown that the HVS is more sensitive to compression effects in comparison to the automated systems. In automated face recognition systems, `mixed lightness' scenes were the most affected and `low lightness' scenes were the least affected by compression. In contrast the HVS for the face recognition task, `low lightness' scenes were the most affected and `medium lightness' scenes the least affected. For the automated human detection systems, `close distance' and `run approach' are some of the most commonly affected scenes. Findings have the potential to broaden the methods used for testing imaging systems for security applications

Enabling the Development and Implementation of Digital Twins : Proceedings of the 20th International Conference on Construction Applications of Virtual Reality

Welcome to the 20th International Conference on Construction Applications of Virtual Reality (CONVR 2020). This year we are meeting on-line due to the current Coronavirus pandemic. The overarching theme for CONVR2020 is "Enabling the development and implementation of Digital Twins". CONVR is one of the world-leading conferences in the areas of virtual reality, augmented reality and building information modelling. Each year, more than 100 participants from all around the globe meet to discuss and exchange the latest developments and applications of virtual technologies in the architectural, engineering, construction and operation industry (AECO). The conference is also known for having a unique blend of participants from both academia and industry. This year, with all the difficulties of replicating a real face to face meetings, we are carefully planning the conference to ensure that all participants have a perfect experience. We have a group of leading keynote speakers from industry and academia who are covering up to date hot topics and are enthusiastic and keen to share their knowledge with you. CONVR participants are very loyal to the conference and have attended most of the editions over the last eighteen editions. This year we are welcoming numerous first timers and we aim to help them make the most of the conference by introducing them to other participants