Investigation of efficient resource allocation schemes for WiMAX networks

This thesis was submitted for the degree of Master of Philosophy and was awarded by Brunel University on 9 July 2008.WiMax (Worldwide Interoperability for Microwave Access) is a promising wireless technology with the aim of providing the last mile wireless broadband access designed for both fixed and mobile consumers as an alternative solution to the wired DSL and cable access schemes. The purpose of this research project is to investigate efficient resource allocation algorithms for WiMax. To achieve this goal, we investigate efficient PHY layer Partial Usage of SubCarriers (PUSC) allocation as well as MAC layer piggyback bandwidth request mechanisms. At the PHY layer we proposed improvements on the Uplink and Downlink PUSC subcarrier allocation scheme. For the Uplink PUSC we suggested a method by allocating different frequencies to neighbouring cells in combination with the Integer Frequency Reuse (IFR) and Fractional Frequency Reuse (FFR) in order to reduce interferences and collisions. The simulation results exhibit that collision rates can be reduced to zero for both IFR and FFR patterns with the proposed improvement by assuming that perfect power control is used in the system. In addition, there is no collision at cell edges. The results also show that FFR patterns achieve lower inter-cell interference and higher capacities as compared to the IFR patterns. For the Downlink PUSC we introduced an offset scheme with the purpose of increasing the number of users in the system. At the MAC layer we propose an improvement on the piggyback bandwidth request mechanism by increasing the size of the piggyback bandwidth request in order to reduce the number of bandwidth requests and hence improve the resource utilisation. The simulation results demonstrate that our improved scheme achieves higher throughput, less delay and packet loss rates as compared to the standardised piggyback bandwidth request mechanism

Energy efficiency in next generation wireless networks: methodologies, solutions and algorithms

Mobile Broadband Wireless Access (BWA) networks will offer in the forthcoming years multiple and differentiated services to users with high mobility requirements, connecting via portable or wearable devices which rely on the use of batteries by necessity. Since such devices consume a relatively large fraction of energy for transmitting/receiving data over-the-air, mechanisms are needed to reduce power consumption, in order to increase the lifetime of devices and hence improve user’s satisfaction. Next generation wireless network standards define power saving functions at the Medium Access Control (MAC) layer, which allow user terminals to switch off the radio transceiver during open traffic sessions for greatest energy consumption reduction. However, enabling power saving usually increases the transmission latency, which can negatively affect the Quality of Service (QoS) experienced by users. On the other hand, imposing stringent QoS requirements may limit the amount of energy that can be saved. The IEEE 802.16e standard defines the sleep mode is power saving mechanism with the purpose of reducing energy consumption. Three different operation classes are provided, each one to serve different class of traffic: class I, best effort traffic, class II real time traffic and class III multicast traffic. Several aspects of the sleep mode are left unspecified, as it is usually done in standards, allowing manufacturers to implement their own proprietary solutions, thus gaining a competitive advantage over the rivals. The work of this thesis is aimed at verifying, the effectiveness of the power saving mechanism proposed into IEEE 802.16e standard, focusing on the mutual interaction between power saving and QoS support. Two types of delay constrained applications with different requirements are considered, i.e., Web and Voice over IP (VoIP). The performance is assessed via detailed packet-level simulation, with respect to several system parameters. To capture the relative contribution of all the factors on the energy- and QoS-related metrics, part of the evaluation is carried out by means of 2k · r! analysis. Our study shows that the sleep mode can achieve significant power consumption reduction, however, when real time traffic is considered a wise configuration of the parameters is mandatory in order to avoid unacceptable degradation of the QoS. Finally, based on the guidelines drawn through the analysis, we extend our contribution beyond a simple evaluation, proposing a power saving aware scheduling framework aimed at reducing further the energy consumption. Our framework integrates with existing scheduling policies that can pursue their original goals, e.g. maximizing throughput or fairness, while improving the energy efficiency of the user terminals. Its effectiveness is assessed through an extensive packet level simulation campaign

Dynamic bandwidth scheduling and burst construction algorithm for downlink in (4G) mobile WiMAX networks

Advanced wireless systems, also called fourth generation (4G) wireless systems, such as Mobile Worldwide interoperability for Microwave Access (WiMAX), are developed to provide broadband wireless access in true sense. Therefore, it becomes mandatory for such kind of systems to provide Quality of Service (QoS) support for wide range of applications. In such types of systems, wireless base stations are responsible for distributing proper amount of bandwidth among different mobile users, thus satisfying a user’s QoS requirements. The task of distributing proper amount of bandwidth rests upon a scheduling algorithm, typically executed at the base station. 2G and 3G wireless systems are able to provide only voice, low data rate, and delay insensitive services, such as Web browsing. This is due to the lack of development in digital modulation and multiple access schemes, which are two major aspects of physical layer of these systems. Digital modulation is used to combat with location-dependent channel errors which get introduced in the data transmitted by base station on a wireless channel to a mobile station. Hence, different locations of every mobile station in a cell coverage area require different modulation and coding schemes for error-free transmission. Link adaptation is a technique that makes the use of variable modulation and coding schemes possible, according to varying location of mobile stations. This technique is used by 4G systems to achieve error free transmissions. 2G and 3G systems are not capable of achieving error-free transmissions in many cases due to significantly fewer or no choice of modulation and coding schemes for different locations of mobile stations. In such cases, most of the time, wireless channel is either error-prone or error-free for mobile station. Scheduling algorithms developed for 2G and 3G systems focussed on providing long term average rate requirements of users, which are satisfied at the expense of zero transmission for mobile users experiencing bad or error prone channel. This approach was adopted to achieve efficient use of wireless channel capacity. This was the best approach adopted by majority of scheduling algorithms because delay sensitive applications were not supported in such systems and hence bounded delay was not a matter of concern. Hence, the majority of the algorithms focussed on providing long term average rate requirements while maximizing cell throughput. This helped in making efficient use of wireless channel capacity at the expense of zero transmission for mobile users experiencing bad channel and compromising delay performance. These approaches, however, will not be suitable for 4G systems as such systems support wide range of applications ranging from delay-insensitive to highly delay-sensitive. Hence in this thesis, a dynamic bandwidth scheduling algorithm called Leaky Bucket Token Bank (LBTB) is proposed. This algorithm exploits some advanced features of 4G systems, like link adaptation and multiple access scheme, to achieve long term average rate requirements for delay-insensitive applications and bounded delay for delay-sensitive applications. Advanced features of 4G systems also bring more challenges. One such challenge is Orthogonal Frequency Division Multiple Access (OFDMA), a multiple access scheme deployed in 4G systems. In OFDMA, scheduled data for different mobile stations is packed into bursts and mapped to a two dimensional structure of time and frequency, called OFDMA frame. It has been observed that the way bursts are mapped to OFDMA frame affects the wakeup time of mobile stations receiving data and therefore causes power consumption. Wakeup time is the time duration in OFDMA frame for which the mobile station becomes active. Since OFDMA frame is a limited and precious radio resource, the efficient use of such radio resource is necessary. Efficient use requires that the wastage of such radio resource be minimized. Hence in this thesis, a burst construction algorithm called Burst Construction for Fairness in Power (BCFP) is also proposed. The algorithm attempts to achieve fairness in power consumption of different mobile stations by affecting their wakeup time. It also attempts to minimize wastage of radio resources. For comparing the performance of joint proposed algorithms (LBTB+BCFP), the proposed burst construction algorithm (BCFP) is joined to the two other existing scheduling algorithms namely: Token Bank Fair Queuing (TBFQ) and Adaptive Token Bank Fair Queuing (ATBFQ). TBFQ is an algorithm developed for 3G wireless networks whereas, ATBFQ is an extension to the TBFQ and is developed for 4G wireless networks. Therefore, the performance of the proposed algorithms jointly together (LBTB+BCFP) is compared with the joint TBFQ and proposed burst construction algorithm (TBFQ+BCFP), as well as joint ATBFQ and proposed burst construction algorithm (ATBFQ+BCFP). We compare the performance in terms of average queuing delay, average cell throughput, packet loss, fairness among different mobile users, fairness in average wakeup times (average power consumption), and fraction of radio resources wasted. The performance of proposed burst construction algorithm (BCFP) is also compared with Round Robin algorithm in terms of fairness in average power consumption as well as fraction of radio resources wasted, for varying number of users

Performance analysis of 4G wireless networks using system level simulator

Doutoramento em Engenharia ElectrotécnicaIn the last decade, mobile wireless communications have witnessed an explosive growth in the user’s penetration rate and their widespread deployment around the globe. In particular, a research topic of particular relevance in telecommunications nowadays is related to the design and implementation of mobile communication systems of 4th generation (4G). 4G networks will be characterized by the support of multiple radio access technologies in a core network fully compliant with the Internet Protocol (all IP paradigms). Such networks will sustain the stringent quality of service (QoS) requirements and the expected high data rates from the type of multimedia applications (i.e. YouTube and Skype) to be available in the near future. Therefore, 4G wireless communications system will be of paramount importance on the development of the information society in the near future. As 4G wireless services will continue to increase, this will put more and more pressure on the spectrum availability. There is a worldwide recognition that methods of spectrum managements have reached their limit and are no longer optimal, therefore new paradigms must be sought. Studies show that most of the assigned spectrum is under-utilized, thus the problem in most cases is inefficient spectrum management rather spectrum shortage. There are currently trends towards a more liberalized approach of spectrum management, which are tightly linked to what is commonly termed as Cognitive Radio (CR). Furthermore, conventional deployment of 4G wireless systems (one BS in cell and mobile deploy around it) are known to have problems in providing fairness (users closer to the BS are more benefited relatively to the cell edge users) and in covering some zones affected by shadowing, therefore the use of relays has been proposed as a solution. To evaluate and analyse the performances of 4G wireless systems software tools are normally used. Software tools have become more and more mature in recent years and their need to provide a high level evaluation of proposed algorithms and protocols is now more important. The system level simulation (SLS) tools provide a fundamental and flexible way to test all the envisioned algorithms and protocols under realistic conditions, without the need to deal with the problems of live networks or reduced scope prototypes. Furthermore, the tools allow network designers a rapid collection of a wide range of performance metrics that are useful for the analysis and optimization of different algorithms. This dissertation proposes the design and implementation of conventional system level simulator (SLS), which afterwards enhances for the 4G wireless technologies namely cognitive Radios (IEEE802.22) and Relays (IEEE802.16j). SLS is then used for the analysis of proposed algorithms and protocols.FC

Adaptive Communications for Next Generation Broadband Wireless Access Systems

Un dels aspectes claus en el disseny i gestió de les xarxes sense fils d'accés de banda ampla és l'ús eficient dels recursos radio. Des del punt de vista de l'operador, l'ample de banda és un bé escàs i preuat que s´ha d'explotar i gestionar de la forma més eficient possible tot garantint la qualitat del servei que es vol proporcionar. Per altra banda, des del punt de vista del usuari, la qualitat del servei ofert ha de ser comparable al de les xarxes fixes, requerint així un baix retard i una baixa pèrdua de paquets per cadascun dels fluxos de dades entre la xarxa i l'usuari. Durant els darrers anys s´han desenvolupat nombroses tècniques i algoritmes amb l'objectiu d'incrementar l'eficiència espectral. Entre aquestes tècniques destaca l'ús de múltiples antenes al transmissor i al receptor amb l'objectiu de transmetre diferents fluxos de dades simultaneament sense necessitat d'augmentar l'ample de banda. Per altra banda, la optimizació conjunta de la capa d'accés al medi i la capa física (fent ús de l'estat del canal per tal de gestionar de manera optima els recursos) també permet incrementar sensiblement l'eficiència espectral del sistema.L'objectiu d'aquesta tesi és l'estudi i desenvolupament de noves tècniques d'adaptació de l'enllaç i gestió dels recursos ràdio aplicades sobre sistemes d'accés ràdio de propera generació (Beyond 3G). Els estudis realitzats parteixen de la premissa que el transmisor coneix (parcialment) l'estat del canal i que la transmissió es realitza fent servir un esquema multiportadora amb múltiples antenes al transmisor i al receptor. En aquesta tesi es presenten dues línies d'investigació, la primera per casos d'una sola antenna a cada banda de l'enllaç, i la segona en cas de múltiples antenes. En el cas d'una sola antena al transmissor i al receptor, un nou esquema d'assignació de recursos ràdio i priorització dels paquets (scheduling) és proposat i analitzat integrant totes dues funcions sobre una mateixa entitat (cross-layer). L'esquema proposat té com a principal característica la seva baixa complexitat i que permet operar amb transmissions multimedia. Alhora, posteriors millores realitzades per l'autor sobre l'esquema proposat han permès també reduir els requeriments de senyalització i combinar de forma óptima usuaris d'alta i baixa mobilitat sobre el mateix accés ràdio, millorant encara més l'eficiència espectral del sistema. En cas d'enllaços amb múltiples antenes es proposa un nou esquema que combina la selecció del conjunt optim d'antenes transmissores amb la selecció de la codificació espai- (frequència-) temps. Finalment es donen una sèrie de recomanacions per tal de combinar totes dues línies d'investigació, així con un estat de l'art de les tècniques proposades per altres autors que combinen en part la gestió dels recursos ràdio i els esquemes de transmissió amb múltiples antenes.Uno de los aspectos claves en el diseño y gestión de las redes inalámbricas de banda ancha es el uso eficiente de los recursos radio. Desde el punto de vista del operador, el ancho de banda es un bien escaso y valioso que se debe explotar y gestionar de la forma más eficiente posible sin afectar a la calidad del servicio ofrecido. Por otro lado, desde el punto de vista del usuario, la calidad del servicio ha de ser comparable al ofrecido por las redes fijas, requiriendo así un bajo retardo y una baja tasa de perdida de paquetes para cada uno de los flujos de datos entre la red y el usuario. Durante los últimos años el número de técnicas y algoritmos que tratan de incrementar la eficiencia espectral en dichas redes es bastante amplio. Entre estas técnicas destaca el uso de múltiples antenas en el transmisor y en el receptor con el objetivo de poder transmitir simultáneamente diferentes flujos de datos sin necesidad de incrementar el ancho de banda. Por otro lado, la optimización conjunta de la capa de acceso al medio y la capa física (utilizando información de estado del canal para gestionar de manera óptima los recursos) también permite incrementar sensiblemente la eficiencia espectral del sistema.El objetivo de esta tesis es el estudio y desarrollo de nuevas técnicas de adaptación del enlace y la gestión de los recursos radio, y su posterior aplicación sobre los sistemas de acceso radio de próxima generación (Beyond 3G). Los estudios realizados parten de la premisa de que el transmisor conoce (parcialmente) el estado del canal a la vez que se considera que la transmisión se realiza sobre un sistema de transmisión multiportadora con múltiple antenas en el transmisor y el receptor. La tesis se centra sobre dos líneas de investigación, la primera para casos de una única antena en cada lado del enlace, y la segunda en caso de múltiples antenas en cada lado. Para el caso de una única antena en el transmisor y en el receptor, se ha desarrollado un nuevo esquema de asignación de los recursos radio así como de priorización de los paquetes de datos (scheduling) integrando ambas funciones sobre una misma entidad (cross-layer). El esquema propuesto tiene como principal característica su bajo coste computacional a la vez que se puede aplicar en caso de transmisiones multimedia. Posteriores mejoras realizadas por el autor sobre el esquema propuesto han permitido también reducir los requisitos de señalización así como combinar de forma óptima usuarios de alta y baja movilidad. Por otro lado, en caso de enlaces con múltiples antenas en transmisión y recepción, se presenta un nuevo esquema de adaptación en el cual se combina la selección de la(s) antena(s) transmisora(s) con la selección del esquema de codificación espacio-(frecuencia-) tiempo. Para finalizar, se dan una serie de recomendaciones con el objetivo de combinar ambas líneas de investigación, así como un estado del arte de las técnicas propuestas por otros autores que combinan en parte la gestión de los recursos radio y los esquemas de transmisión con múltiples antenas.In Broadband Wireless Access systems the efficient use of the resources is crucial from many points of views. From the operator point of view, the bandwidth is a scarce, valuable, and expensive resource which must be exploited in an efficient manner while the Quality of Service (QoS) provided to the users is guaranteed. On the other hand, a tight delay and link quality constraints are imposed on each data flow hence the user experiences the same quality as in fixed networks. During the last few years many techniques have been developed in order to increase the spectral efficiency and the throughput. Among them, the use of multiple antennas at the transmitter and the receiver (exploiting spatial multiplexing) with the joint optimization of the medium access control layer and the physical layer parameters.In this Ph.D. thesis, different adaptive techniques for B3G multicarrier wireless systems are developed and proposed focusing on the SS-MC-MA and the OFDM(A) (IEEE 802.16a/e/m standards) communication schemes. The research lines emphasize into the adaptation of the transmission having (Partial) knowledge of the Channel State Information for both; single antenna and multiple antenna links. For single antenna links, the implementation of a joint resource allocation and scheduling strategy by including adaptive modulation and coding is investigated. A low complexity resource allocation and scheduling algorithm is proposed with the objective to cope with real- and/or non-real- time requirements and constraints. A special attention is also devoted in reducing the required signalling. However, for multiple antenna links, the performance of a proposed adaptive transmit antenna selection scheme jointly with space-time block coding selection is investigated and compared with conventional structures. In this research line, mainly two optimizations criteria are proposed for spatial link adaptation, one based on the minimum error rate for fixed throughput, and the second focused on the maximisation of the rate for fixed error rate. Finally, some indications are given on how to include the spatial adaptation into the investigated and proposed resource allocation and scheduling process developed for single antenna transmission

이동통신 네트워크에서의 QoS 패킷 스케줄러 설계 및 고정 릴레이 관련 주파수 재사용 관리 기법 연구

학위논문 (박사)-- 서울대학교 대학원 공과대학 전기·컴퓨터공학부, 2017. 8. 박세웅.The main interest of this paper is to understand a basic approach to provide more efficient method to allocate radio resources in the mobile communication systems, especially in which radio resources could be allocated by both frequency and time division multiple access. So, we consider OFDMA system and the ideas described in this paper could be easily applied to the current and next generation mobile communication systems. This paper studies two basic research themesa QoS packet scheduler design and fixed relay resource management policies based on frequency reuse in mobile networks. This paper considers novel scheduler structures that are executable in the environments of multiple traffic classes and multiple frequency channels. To design a scheduler structure for multiple traffic classes, we first propose a scheduler selection rule that uses the priority of traffic class and the urgency level of each packet. Then we relax the barrier of traffic class priority when a high priority packet has some room in waiting time. This gives us a chance to exploit multiuser diversity, thereby giving more flexibility in scheduling. Our considered scheduler can achieve higher throughput compared to the simple extension of conventional modified largest weighted delay first (MLWDF) scheduler while maintaining the delay performance for QoS class traffic. We also design a scheduler structure for multiple frequency channels that chooses a good channel for each user whenever possible to exploit frequency diversity. The simulation results show that our proposed scheduler increases the total system throughput by up to 50% without degrading the delay performance. This paper also introduces radio resource management schemes based on frequency reuse for fixed relay stations in mobile cellular networks. Mobile stations in the cell boundary experience poor spectral efficiency due to the path loss and interference from adjacent cells. Therefore, satisfying QoS requirements of each MS at the cell boundary has been an important issue. To resolve this spectral efficiency problem at the cell boundary, deploying fixed relay stations has been actively considered. In this paper, we consider radio resource management policies based on frequency reuse for fixed relays that include path selection rules, frequency reuse pattern matching, and frame transmission pattern matching among cells. We evaluate performance of each policy by varying parameter values such as relay stations position and frequency reuse factor. Through Monte Carlo simulations and mathematical analysis, we suggest some optimal parameter values for each policy and discuss some implementation issues that need to be considered in practical deployment of relay stations. We also surveyed further works that many researchers have been studied to tackle the similar problems of QoS scheduling and resource management for relay with our proposed work. We expect that there would be more future works by priority-based approach and energy-aware approach for QoS scheduling. Also current trends such as the rising interest in IoT system, discussion of densification of cells and D2D communications in 5G systems make us expect that the researches in these topics related with relays would be popular in the future. We also think that there are many interesting problems regarding QoS support and resource management still waiting to be tackled, especially combined with recent key topics in mobile communication systems such as 5G standardization, AI and NFV/SDN.Chapter 1 Introduction 1 1.1 QoS Packet Scheduler 4 1.2 Fixed Relay Frequency Reuse Policies 6 Chapter 2 Scheduler Design for Multiple Traffic Classes in OFDMA Networks 10 2.1 Proposed Schedulers 10 2.1.1 Scheduler Structures 12 2.1.2 MLWDF scheduler for Multiple Traffic Classes 13 2.1.3 Joint Scheduler 13 2.2 System Model 18 2.3 Performance Evaluation 19 2.3.1 Schedulers for Multiple Traffic Classes 20 2.3.2 Impact of Scheduler Selection Rule 25 2.3.3 Frame Based Schedulers 27 2.3.4 Impact of Partial Feedback 30 2.3.5 Adaptive Threshold Version Schedulers 33 2.4 Conclusion 36 Chapter 3 Frequency Reuse Policies for Fixed Relays in Cellular Networks 40 3.1 System Model 40 3.1.1 Frame Transmission and Frequency Reuse Patterns among RSs 42 3.1.2 Positioning of RSs and Channel Capacity 44 3.1.3 Area Spectral Efficiency 45 3.2 Radio Resource Management Policies Based on Frequency Reuse 46 3.2.1 Path Selection Rule 46 3.2.2 Frequency Reuse and Frame Transmission Pattern Matchings among Cells 52 3.3 Monte Carlo Simulation and Results 53 3.4 Consideration of Practical Issues 80 3.5 Conclusion 81 Chapter 4 Surveys of Further Works 83 4.1 Further Works on QoS Schedulers 83 4.1.1 WiMAX Schedulers 85 4.1.2 LTE Schedulers 92 4.2 Further Works on Radio Resource Management in Relay Systems 98 4.3 Future Challenges 100 Chapter 5 Conclusion 104 Bibliography 107 초록 127Docto

An improved resource allocation scheme for WiMAX using channel information

In recent years, tremendous progress has been made in wireless communication systems to provide wireless coverage to end users at different data rates. WiMAX technology provides wireless broadband access over an extended coverage area in both fixed and mobility environments. Most of the existing resource allocation schemes allocate resources based on respective service class of the incoming users’ requests. However, due to variation in channel conditions, user mobility and diverse resource requirements QoS based resource allocation either results in over or under utilization of allocated resources. Therefore, resource allocation is a challenging task in WiMAX. This research proposes an improved resource management mechanism that performs resource allocation by taking into consideration not only the user service class but also the respective channel status. Based on these two parameters, this research aims to achieve improved resource allocation in terms of resource utilization, fairness and network throughput. First, a Channel Based Resource Allocation scheme is introduced where priority in resource allocation is given to users’ requests with relatively higher service classes and better channel status. To maintain fairness in resource allocation process, a Fair Resource Allocation Based Service mechanism is developed where priority is given to users’ requests having less additional resources demand. Finally, to improve throughput of the network, a Channel Based Throughput Improvement approach is proposed which dynamically selects a threshold level of channel gain based on individual channel gain of users. During resource allocation process, users above the threshold level are selected for resource allocation such that priority is given to users with high channel gain. Different simulation scenario results reveal an overall improved resource utilization from 87% to 91% and the throughput improves up to 15% when compared to existing schemes. In conclusion the performance of resource utilization is improved if channel status is considered as an input parameter

Traffic Scheduling in Point-to-Multipoint OFDMA-based Systems

The new generation of wireless networks (e.g., WiMAX, LTE-Advanced, Cognitive Radio) support many high resource-consuming services (e.g., VoIP, video conference, multiplayer interactive gaming, multimedia streaming, digital video broadcasting, mobile commerce). The main problem of such networks is that the bandwidth is limited, besides to be subject to fading process, and shared among multiple users. Therefore, a combination of sophisticated transmission techniques (e.g., OFDMA) and proper packet scheduling algorithms is necessary, in order to provide applications with suitable quality of service. This Thesis addresses the problem of traffic scheduling in Point-to-Multipoint OFDMA-based systems. We formally prove that in such systems, even a simple scheduling problem of a Service Class at a time, is NP-complete, therefore, computationally intractable. An optimal solution is unfeasible in term of time, thus, fast and simple scheduling heuristics are needed. First, we address the Best Effort traffic scheduling issue, in a system adopting variable-length Frames, with the objective of producing a legal schedule (i.e., the one meeting all system constraints) of minimum length. Besides, we present fast and simple heuristics, which generate suboptimal solutions, and evaluate their performance in the average case, as in the worst one. Then, we investigate the scheduling of Real Time traffic, with the objective of meeting as many deadlines as possible, or equivalently, minimizing the packet drop ratio. Specifically, we propose two scheduling heuristics, which apply two different resource allocation mechanisms, and evaluate their average-case performance by means of a simulation experiment

Modeling And Dynamic Resource Allocation For High Definition And Mobile Video Streams

Video streaming traffic has been surging in the last few years, which has resulted in an increase of its Internet traffic share on a daily basis. The importance of video streaming management has been emphasized with the advent of High Definition: HD) video streaming, as it requires by its nature more network resources. In this dissertation, we provide a better support for managing HD video traffic over both wireless and wired networks through several contributions. We present a simple, general and accurate video source model: Simplified Seasonal ARIMA Model: SAM). SAM is capable of capturing the statistical characteristics of video traces with less than 5% difference from their calculated optimal models. SAM is shown to be capable of modeling video traces encoded with MPEG-4 Part2, MPEG-4 Part10, and Scalable Video Codec: SVC) standards, using various encoding settings. We also provide a large and publicly-available collection of HD video traces along with their analyses results. These analyses include a full statistical analysis of HD videos, in addition to modeling, factor and cluster analyses. These results show that by using SAM, we can achieve up to 50% improvement in video traffic prediction accuracy. In addition, we developed several video tools, including an HD video traffic generator based on our model. Finally, to improve HD video streaming resource management, we present a SAM-based delay-guaranteed dynamic resource allocation: DRA) scheme that can provide up to 32.4% improvement in bandwidth utilization