112 research outputs found
Investigation of performance issues affecting optical circuit and packet switched WDM networks
Optical switching represents the next step in the evolution of optical networks. This thesis describes work that was carried out to examine performance issues which can occur in two distinct varieties of optical switching networks.
Slow optical switching in which lightpaths are requested, provisioned and torn down when no longer required is known as optical circuit switching (OCS). Services enabled by OCS
include wavelength routing, dynamic bandwidth allocation and protection switching. With network elements such as reconfigurable optical add/drop multiplexers (ROADMs) and
optical cross connects (OXCs) now being deployed along with the generalized multiprotocol label switching (GMPLS) control plane this represents the current state of the art in commercial networks. These networks often employ erbium doped fiber amplifiers (EDFAs) to boost the optical signal to noise ratio of the WDM channels and as channel configurations change, wavelength dependent gain variations in the EDFAs can lead to channel power
divergence that can result in significant performance degradation. This issue is examined in detail using a reconfigurable wavelength division multiplexed (WDM) network testbed and results show the severe impact that channel reconfiguration can have on transmission
performance.
Following the slow switching work the focus shifts to one of the key enabling technologies for fast optical switching, namely the tunable laser. Tunable lasers which can switch on the nanosecond timescale will be required in the transmitters and wavelength converters of optical packet switching networks. The switching times and frequency drifts, both of commercially available lasers, and of novel devices are investigated and performance issues which can arise due to this frequency drift are examined. An optical packet switching transmitter based on a novel label switching technique and employing one of the fast tunable lasers is designed and employed in a dual channel WDM packet switching system. In depth
performance evaluations of this labelling scheme and packet switching system show the detrimental impact that wavelength drift can have on such systems
Investigation of wavelength tunable laser modules for use in future optically switched dense wavelength division multiplexed networks
This thesis investigates the use of fast wavelength tunable laser modules in future optically switched dense wavelength division multiplexed networks (DWDM). The worldwide demand for increasingly greater broadband access has thus far been
satisfied by the use of DWDM networks, enabled by the development of the erbium doped amplifier. However as this demand continues to grow electronic switching at network nodes will become a limiting factor, creating a potential bandwidth mismatch between the fibre capacities and switching capacity. Optical switching has been proposed to overcome this electronic bottleneck and fully utilize the
enormous bandwidth offered by fibre. Fast tunable lasers (TLs) are a key technology in this area, enabling fast wavelength switching.
Experimental work involving the fast wavelength switching of sampled grating distributed Bragg reflector TL modules is presented. Spurious mode generation during wavelength tuning is shown to cause severe cross-channel interference on
other data channels in a DWDM test bed. Bit error rate (BER) results demonstrate that a integrated semiconductor optical amplifier can greatly reduce system degradation caused by asynchronous switching of multiple TLs. This is achieved by
optically blanking the laser output during channel transition for a period of 60 ns. Immediately after the blanking period a wavelength drift due to the TL module
wavelength locking is found to cause cross channel interference and introduce an error floor >1 e-4 on the BER performance characteristic of an adjacent channel in a 12.5 GHz spaced DWDM network. This drift is characterised, using a selfheterodyne and a filter based approach â Error free performance is subsequently demonstrated by using an extended blanking period of 260 ns or by using subcarrier
multiplexing transmission and phase selective demodulation before detection.
A DWDM optical label switching system, utilizing 40 Gbit/s payload data with low data rate labels placed on a 40 GHz sub-carrier and using TL transmitters is presented. Channel performance is monitored on a static channel as a second data channel is tuned into an adjacent channel on a 100 GHz spaced grid. Error free performance is demonstrated only for the channel payload â Time resolved BER results in agreement with the TL wavelength drift are measured and demonstrate a
detrimental influence of the drift on the sub-carrier label performance
Recommended from our members
Reconfigurable Optically Interconnected Systems
With the immense growth of data consumption in today's data centers and high-performance computing systems driven by the constant influx of new applications, the network infrastructure supporting this demand is under increasing pressure to enable higher bandwidth, latency, and flexibility requirements. Optical interconnects, able to support high bandwidth wavelength division multiplexed signals with extreme energy efficiency, have become the basis for long-haul and metro-scale networks around the world, while photonic components are being rapidly integrated within rack and chip-scale systems. However, optical and photonic interconnects are not a direct replacement for electronic-based components. Rather, the integration of optical interconnects with electronic peripherals allows for unique functionalities that can improve the capacity, compute performance and flexibility of current state-of-the-art computing systems. This requires physical layer methodologies for their integration with electronic components, as well as system level control planes that incorporates the optical layer characteristics. This thesis explores various network architectures and the associated control plane, hardware infrastructure, and other supporting software modules needed to integrate silicon photonics and MEMS based optical switching into conventional datacom network systems ranging from intra-data center and high-performance computing systems to the metro-scale layer networks between data centers. In each of these systems, we demonstrate dynamic bandwidth steering and compute resource allocation capabilities to enable significant performance improvements. The key accomplishments of this thesis are as follows.
In Part 1, we present high-performance computing network architectures that integrate silicon photonic switches for optical bandwidth steering, enabling multiple reconfigurable topologies that results in significant system performance improvements. As high-performance systems rely on increased parallelism by scaling up to greater numbers of processor nodes, communication between these nodes grows rapidly and the interconnection network becomes a bottleneck to the overall performance of the system. It has been observed that many scientific applications operating on high-performance computing systems cause highly skewed traffic over the network, congesting only a small percentage of the total available links while other links are underutilized. This mismatch of the traffic and the bandwidth allocation of the physical layer network presents the opportunity to optimize the bandwidth resource utilization of the system by using silicon photonic switches to perform bandwidth steering. This allows the individual processors to perform at their maximum compute potential and thereby improving the overall system performance. We show various testbeds that integrates both microring resonator and Mach-Zehnder based silicon photonic switches within Dragonfly and Fat-Tree topology networks built with conventional
equipment, and demonstrate 30-60% reduction in execution time of real high-performance benchmark applications.
Part 2 presents a flexible network architecture and control plane that enables autonomous bandwidth steering and IT resource provisioning capabilities between metro-scale geographically distributed data centers. It uses a software-defined control plane to autonomously provision both network and IT resources to support different quality of service requirements and optimizes resource utilization under dynamically changing load variations. By actively monitoring both the bandwidth utilization of the network and CPU or memory resources of the end hosts, the control plane autonomously provisions background or dynamic connections with different levels of quality of service using optical MEMS switching, as well as initializing live migrations of virtual machines to consolidate or distribute workload. Together these functionalities provide flexibility and maximize efficiency in processing and transferring data, and enables energy and cost savings by scaling down the system when resources are not needed. An experimental testbed of three data center nodes was built to demonstrate the feasibility of these capabilities.
Part 3 presents Lightbridge, a communications platform specifically designed to provide a more seamless integration between processor nodes and an optically switched network. It addresses some of the crucial issues faced by the works presented in the previous chapters related to optical switching. When optical switches perform switching operations, they change the physical topology of the network, and they lack the capability to buffer packets, resulting in certain optical circuits being unavailable. This prompts the question of whether it is safe to transmit packets by end hosts at any given time. Lightbridge was developed to coordinate switching and routing of optical circuits across the network, by having the processors gain information about the current state of the optical network before transmitting packets, and being able to buffer packets when the optical circuit is not available. This part describes details of Lightbridge which is constituted by a loadable Linux kernel module along with other supporting modifications to the Linux kernel in order to achieve the necessary functionalities
Multi-Granular Optical Cross-Connect: Design, Analysis, and Demonstration
A fundamental issue in all-optical switching is to offer efficient and cost-effective transport services for a wide range of bandwidth granularities. This paper presents multi-granular optical cross-connect (MG-OXC) architectures that combine slow (ms regime) and fast (ns regime) switch elements, in order to support optical circuit switching (OCS), optical burst switching (OBS), and even optical packet switching (OPS). The MG-OXC architectures are designed to provide a cost-effective approach, while offering the flexibility and reconfigurability to deal with dynamic requirements of different applications. All proposed MG-OXC designs are analyzed and compared in terms of dimensionality, flexibility/reconfigurability, and scalability. Furthermore, node level simulations are conducted to evaluate the performance of MG-OXCs under different traffic regimes. Finally, the feasibility of the proposed architectures is demonstrated on an application-aware, multi-bit-rate (10 and 40 Gbps), end-to-end OBS testbed
Performance analysis of a proposed hybrid optical network
This dissertation discusses a novel Hybrid Optical Network (HON) that can provide service differentiation based on traffic characteristics (i.e., packet, burst, and long-lived flow) with QoS guarantee not only in network layer, but also in physical layer. The DHON consists of sophisticated edge-nodes, which can classify, monitor, and dynamically adjust optical channels in the core layer as traffic variation. The edge nodes aggregate traffic, identifying end-to-end delay by ingress queuing delay or burst timeout. The network can estimate number of channels by arriving traffic intensity and distribution with estimated upper-bound delay. The core layer employs two parallel optical switches (OCS, OBS) in the same platform. Thanks to the overflow system, the proposed network enhances utilization with fewer long distance premium channels. The premium channel can quickly handle burst traffic without new channel assignment. With less overprovisioning capacity design, the premium channel enhances utilization and decrease number of costly premium channels. This research also proposes mathematic models to represent particular DHON channels (i.e., circuit, packet, and burst). We employ method of moments based on overflow theory to forecast irregular traffic pattern from circuit-based channel (i.e., M/M/c/c) to overflow channel, in which G/G/1 model based on Ph/Ph/1 matrix can represent the overflow channel. Moreover, secondary channel supports packet-based traffic over wavelength channel with two service classes: Class I based on delay sensitive traffic (i.e., long flow) and Class II for non-delay sensitive traffic (e.g., best effort). In addition, mixture of traffic in the wavelength channels is investigated based on M/G/1 and M/G/2 with specific service time distribution for particular class. Finally, we show our DHON based on (O-O-O) switching paradigm has improved the performance over typical (O-E-O) switching network architecture based on NSF topology
Control plane routing in photonic networks
The work described in the thesis investigates the features of control plane functionality for routing wavelength paths to serve a set of sub-wavelength demands. The work takes account of routing problems only found in physical network layers, notably analogue transmission impairments. Much work exists on routing connections for dynamic Wavelength-Routed Optical Networks (WRON) and to demonstrate their advantages over static photonic networks. However, the question of how agile the WRON should be has not been addressed quantitatively. A categorization of switching speeds is extended, and compared with the reasons for requiring network agility. The increase of effective network capacity achieved with increased agility is quantified through new simulations. It is demonstrated that this benefit only occurs within a certain window of network fill; achievement of significant gain from a more-agile network may be prevented by the operatorâs chosen tolerable blocking probability. The Wavelength Path Sharing (WPS) scheme uses semi-static wavelengths to form unidirectional photonic shared buses, reducing the need for photonic agility. Making WPS more practical, novel improved routing algorithms are proposed and evaluated for both execution time and performance, offering significant benefit in speed at modest cost in efficiency. Photonic viability is the question of whether a path that the control plane can configure will work with an acceptable bit error rate (BER) despite the physical transmission impairments encountered. It is shown that, although there is no single approach that is simple, quick to execute and generally applicable at this time, under stated conditions approximations may be made to achieve a general solution that will be fast enough to enable some applications of agility. The presented algorithms, analysis of optimal network agility and viability assessment approaches can be applied in the analysis and design of future photonic control planes and network architectures
High capacity photonic integrated switching circuits
As the demand for high-capacity data transfer keeps increasing in high performance computing and in a broader range of system area networking environments; reconfiguring the strained networks at ever faster speeds with larger volumes of traffic has become a huge challenge. Formidable bottlenecks appear at the physical layer of these switched interconnects due to its energy consumption and footprint. The energy consumption of the highly sophisticated but increasingly unwieldy electronic switching systems is growing rapidly with line rate, and their designs are already being constrained by heat and power management issues. The routing of multi-Terabit/second data using optical techniques has been targeted by leading international industrial and academic research labs. So far the work has relied largely on discrete components which are bulky and incurconsiderable networking complexity. The integration of the most promising architectures is required in a way which fully leverages the advantages of photonic technologies. Photonic integration technologies offer the promise of low power consumption and reduced footprint. In particular, photonic integrated semiconductor optical amplifier (SOA) gate-based circuits have received much attention as a potential solution. SOA gates exhibit multi-terahertz bandwidths and can be switched from a high-gain state to a high-loss state within a nanosecond using low-voltage electronics. In addition, in contrast to the electronic switching systems, their energy consumption does not rise with line rate. This dissertation will discuss, through the use of different kind of materials and integration technologies, that photonic integrated SOA-based optoelectronic switches can be scalable in either connectivity or data capacity and are poised to become a key technology for very high-speed applications. In Chapter 2, the optical switching background with the drawbacks of optical switches using electronic cores is discussed. The current optical technologies for switching are reviewed with special attention given to the SOA-based switches. Chapter 3 discusses the first demonstrations using quantum dot (QD) material to develop scalable and compact switching matrices operating in the 1.55”m telecommunication window. In Chapter 4, the capacity limitations of scalable quantum well (QW) SOA-based multistage switches is assessed through experimental studies for the first time. In Chapter 5 theoretical analysis on the dependence of data integrity as ultrahigh line-rate and number of monolithically integrated SOA-stages increases is discussed. Chapter 6 presents some designs for the next generation of large scale photonic integrated interconnects. A 16x16 switch architecture is described from its blocking properties to the new miniaturized elements proposed. Finally, Chapter 7 presents several recommendations for future work, along with some concluding remark
- âŠ