Modular switched reluctance machines to be used in automotive applications

In the last decades industry, including also that of electrical machines and drives, was pushed near to its limits by the high market demands and fierce competition. As a response to the demanding challenges, improvements were made both in the design and manufacturing of electrical machines and drives. One of the introduced advanced technological solutions was the modular construction. This approach enables on a hand easier and higher productivity manufacturing, and on the other hand fast repairing in exploitation. Switched reluctance machines (SRMs) are very well fitted for modular construction, since the magnetic insulation of the phases is a basic design requirement. The paper is a survey of the main achievements in the field of modular electrical machines, (especially SRMs), setting the focus on the machines designed to be used in automotive applications

Slot/pole Combinations Choice for Concentrated Multiphase Machines dedicated to Mild-Hybrid Applications

Version de l'éditeur à l'adresse suivante : http://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6119910&isnumber=6119266This paper presents multiphase permanent magnet machines with concentrated non-overlapped winding as a good candidate for automotive low voltage mild-hybrid applications. These machines often require a trade-off between low speed performances such as high torque density and high speed performances like flux weakening capabilities. This paper describes how to choose a key design parameter to ease this compromise, the slots/poles combination, according to three parameters: winding factor including harmonics factor, rotor losses amount thanks to a comparison factor and radial forces balancing. The comparison criterion are based on both analytical formula and Finite Element Analysis.Projet MHYGALE/ ADEM

Computationally Efficient Strand Eddy Current Loss Calculation in Electric Machines

A fast finite element (FE) based method for the calculation of eddy current losses in the stator windings of randomly wound electric machines is presented in this paper. The method is particularly suitable for implementation in large-scale design optimization algorithms where a qualitative characterization of such losses at higher speeds is most beneficial for identification of the design solutions that exhibit the lowest overall losses including the ac losses in the stator windings. Unlike the common practice of assuming a constant slot fill factor s f for all the design variations, the maximum s f in the developed method is determined based on the individual slot structure/dimensions and strand wire specifications. Furthermore, in lieu of detailed modeling of the conductor strands in the initial FE model, which significantly adds to the complexity of the problem, an alternative rectangular coil modeling subject to a subsequent flux mapping technique for determination of the impinging flux on each individual strand is pursued. Rather than pursuing the precise estimation of ac conductor losses, the research focus of this paper is placed on the development of a computationally efficient technique for the derivation of strand eddy current losses applicable in design optimization, especially where both the electromagnetic and thermal machine behavior are accounted for. A fractional-slot concentrated winding permanent magnet synchronous machine is used for the purpose of this study due to the higher slot leakage flux and slot opening fringing flux of such machines, which are the major contributors to strand eddy current losses in the windings. The analysis is supplemented with an investigation on the influence of the electrical loading on ac winding loss effects for this machine design, a subject that has received less attention in the literature. Experimental ac loss measurements on a 12-slot 10-pole stator assembly will be discussed to verify the existing trends in the simulation result

Investigations on the performances of the electrical generator of a rim-driven marine current turbine”

In this paper, the electrical generator of a rim-driven horizontal-axis current turbine is modeled in detail. Its main characteristics and performances are evaluated (efficiency, mass, cost, etc). This generator is of permanent magnet direct-driven synchronous type and is connected to a variable speed power electronics drive. It is then compared to a more traditional technology (a pod generator) in terms of mass and cost for a common set of specification. In addition, due to the specific geometry of the machine, the use of low-cost ferrite magnets is investigated in place of NdFeB magnets

Diseño y simulación de un generador de imán permanente de rotor radial cónico de flujo axial de potencia 1.1kW para micro aerogeneradores

In this study, design, design calculations and simulation of a permanent magnet generator, which includes two sections of radialand axial flux, are discussed. The output power from the generator is 1.1 kilowatt. In the design of the generator, a cone-shapedstructure with a 90-degree cone angle of 45 degrees from the sides is used for the rotor. In order to compare the various structuresof the synchronous generator, and given that today, permanent magnet generators have been considered with regard to featuressuch as lower weight, higher yields and higher power density than other conventional generators. A finite element analysis of thegenerator developed in Maxwell software. In the radial flux section, the generator includes a conical rotor and a cone stator. Thewindings on the external stator are trapezoidal and are located in stator racks. The finite element analysis of the generator confirmsthat permanent magnet magnets designed on the inner rotor have provided a magnetic flux equal to 1.2 Tesla in the air gap betweenthe generator and the winding of the stator. The rotor magnetic field analysis, rotor magnetic field strength, magnetic field intensity,and magnetic field density at a speed of 500 rpm for cone structure have been performed. In the axial flux section, the generatorconsists of two rotors and a grooved stator, which is obtained by simulating a 1.1 kW power with a sinusoidal three-phase voltage.Two sections of radial flux with a cone-shaped rotor and axial flux side by side make up the generator

Evolution and Modern Approaches for Thermal Analysis of Electrical Machines

In this paper, the authors present an extended survey on the evolution and the modern approaches in the thermal analysis of electrical machines. The improvements and the new techniques proposed in the last decade are analyzed in depth and compared in order to highlight the qualities and defects of each. In particular, thermal analysis based on lumped-parameter thermal network, finite-element analysis, and computational fluid dynamics are considered in this paper. In addition, an overview of the problems linked to the thermal parameter determination and computation is proposed and discussed. Taking into account the aims of this paper, a detailed list of books and papers is reported in the references to help researchers interested in these topics

Permanent Magnet Vernier Machine: A Review

Permanent magnet vernier machines (PMVMs) gained a lot of interest over the past couple of decades. This is mainly due to their high torque density enabled by the magnetic gearing effect. This study will provide a thorough review of recent advances in PMVMs. This review will cover the principle of operation and nature of magnetic gearing in PMVMs, and a better understanding of novel PMVM topologies using different winding configuration as well as different modulation poles and rotor structures. Detailed discussions on the choice of gear ratio, slot-pole combinations, design optimisation and role of advanced materials in PMVMs will be presented. This will provide an update on the current state-of-the art as well as future areas of research. Furthermore, the power factor issue, fault tolerance as well as cost reduction will be discussed highlighting the gap between the current state-of-the art and what is needed in practical applications

Theoretical and Experimental Investigations of a Permanent Magnet Excited Transverse Flux Machine with a Segmented Stator for In-Wheel Motor Applications

A three-phase transverse flux permanent magnet (PM) motor with flux concentrating (FC-) topology that has a segmented stator is studied in this dissertation. The phases of the stator have been placed around the rotational axis of the machine instead of placing them in a classical way over each other along the axial direction. Through this phase arrangement, the electrical and mechanical shifts between the phases are considered to ensure proper operation of the transverse flux machine (TFM) without the need of extra components such as a start-up capacitor or a special designed power supply. The segmented stator construction has required that the conventional ring coils to be replaced by a type of concentric winding that take a saddle shape enabling parallel magnetic circuits to take place. This has initiated studying the effect of the distances located between the phases on all over the performances of the machine. In order to select an initial construction for the stator, a preliminary assessment study of some conventional PM-TFMs having ring coils are carried out, through which they are re-designed as outer rotor motors and compared based on the level of electromagnetic torque and the inductance profile. As the main application of the design is to achieve a compact construction for an outer rotor, low noise and speed too for possible future in-wheel applications, the most interesting issue in this study is how to bring all the phases of the machine around the shaft in one layer without losing the torque productivity as when the phases are placed under each other in the conventional way. Therefore, the designed machine is set in further theoretical evaluation studies via finite element method (FEM) with the conventional layered TFM, and it shows that the TFM with segmented windings has a better torque density as its correspondence in the conventional layered structure. This result is in favor to the segmented structure, in particular, about 31% of the PMs number in the segmented structure (i.e., total number of PMs located between the phases) will not have an active role in the torque production. A detailed mathematical theory has been analytically developed and investigated to show the validity and limitation of the design. The study has incorporated how the segmentation of each phase and placement of the two parts opposite to each other can improve the mechanical balance of the TFM and hence quite rotation. The approach has been shown for two- and three-phase PM-TFMs. Moreover, illustration for applying the same principle of segmented stator to surface PM topology of TFMs is analytical verified and shown via FEM. Possible constructions with segmented stators are developed in a periodical table format to give the machine designer a shortcut for a possible construction with the selected number of magnets, number of segments per phase and the desired space between the phases. Since the noise is a well-known problem of TFMs, due to the ripple in the electromagnetic torque waveform and the natural magnetic normal forces, the normal and axial forces in PM-TFM with segmented stator have been investigated too, where introducing more segments per phase will reduce their effects. In order to validate the theoretical investigation, a low-scaled test machine is designed, constructed and a complete test bench has been built to experimentally test the machine. The experimental investigations have included generator and motor operation modes as well as measuring the ratings, performances of the machine and the starting methods. The test machine has reached via the conducted tests an average torque of about 2.1 Nm with an efficiency of 53% and it has a great development potential to be improved via shaping of stator poles, the room available for the windings, fill factor and more optimization possibilities. Based on the theoretical and experimental investigations, the operation of the segmented winding design of PM-TFM proves itself to work and to have a future for compact motors in industrial operation, or as in-wheel outer rotor motor for mobile platforms. For higher power applications, a machine with such type of stator should be designed with big diameters that will allow the utility of more PMs as well as more segments per phase, where both are involved in the torque production, i.e., more torque density for the segmented TFM