NASA Sea Ice Validation Program for the Defense Meteorological Satellite Program Special Sensor Microwave Imager

The history of the program is described along with the SSM/I sensor, including its calibration and geolocation correction procedures used by NASA, SSM/I data flow, and the NASA program to distribute polar gridded SSM/I radiances and sea ice concentrations (SIC) on CD-ROMs. Following a discussion of the NASA algorithm used to convert SSM/I radiances to SICs, results of 95 SSM/I-MSS Landsat IC comparisons for regions in both the Arctic and the Antarctic are presented. The Landsat comparisons show that the overall algorithm accuracy under winter conditions is 7 pct. on average with 4 pct. negative bias. Next, high resolution active and passive microwave image mosaics from coordinated NASA and Navy aircraft underflights over regions of the Beaufort and Chukchi seas in March 1988 were used to show that the algorithm multiyear IC accuracy is 11 pct. on average with a positive bias of 12 pct. Ice edge crossings of the Bering Sea by the NASA DC-8 aircraft were used to show that the SSM/I 15 pct. ice concentration contour corresponds best to the location of the initial bands at the ice edge. Finally, a summary of results and recommendations for improving the SIC retrievals from spaceborne radiometers are provided

A Framework for SAR-Optical Stereogrammetry over Urban Areas

Currently, numerous remote sensing satellites provide a huge volume of diverse earth observation data. As these data show different features regarding resolution, accuracy, coverage, and spectral imaging ability, fusion techniques are required to integrate the different properties of each sensor and produce useful information. For example, synthetic aperture radar (SAR) data can be fused with optical imagery to produce 3D information using stereogrammetric methods. The main focus of this study is to investigate the possibility of applying a stereogrammetry pipeline to very-high-resolution (VHR) SAR-optical image pairs. For this purpose, the applicability of semi-global matching is investigated in this unconventional multi-sensor setting. To support the image matching by reducing the search space and accelerating the identification of correct, reliable matches, the possibility of establishing an epipolarity constraint for VHR SAR-optical image pairs is investigated as well. In addition, it is shown that the absolute geolocation accuracy of VHR optical imagery with respect to VHR SAR imagery such as provided by TerraSAR-X can be improved by a multi-sensor block adjustment formulation based on rational polynomial coefficients. Finally, the feasibility of generating point clouds with a median accuracy of about 2m is demonstrated and confirms the potential of 3D reconstruction from SAR-optical image pairs over urban areas.Comment: This is the pre-acceptance version, to read the final version, please go to ISPRS Journal of Photogrammetry and Remote Sensing on ScienceDirec

Sea target detection using spaceborne GNSS-R delay-doppler maps: theory and experimental proof of concept using TDS-1 data

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This study addresses a novel application of global navigation satellite system-reflectometry (GNSS-R) delay-Doppler maps (DDMs), namely sea target detection. In contrast with other competing remote sensing technologies, such as synthetic aperture radar and optical systems, typically exploited in the field of sea target detection, GNSS-R systems could be employed as satellite constellations, so as to fulfill the temporal requirements for near real-time ships and sea ice sheets monitoring. In this study, the revisit time offered by GNSS-R systems is quantitatively evaluated by means of a simulation analysis, in which three different realistic GNSS-R missions are simulated and analyzed. Then, a sea target detection algorithm from spaceborne GNSS-R DDMs is described and assessed. The algorithm is based on a sea clutter compensation step and uses an adaptive threshold to take into account spatial variations in the sea background and/or noise statistics. Finally, the sea target detector algorithm is tested and validated for the first time ever using experimental GNSS-R data from the U.K. TechDemoSat-1 dataset. Performance is assessed by providing the receiver operating characteristic curves, and some preliminary experimental results are presented.Peer ReviewedPostprint (published version

Forest disturbance and recovery: A general review in the context of spaceborne remote sensing of impacts on aboveground biomass and canopy structure

Abrupt forest disturbances generating gaps \u3e0.001 km2 impact roughly 0.4–0.7 million km2a−1. Fire, windstorms, logging, and shifting cultivation are dominant disturbances; minor contributors are land conversion, flooding, landslides, and avalanches. All can have substantial impacts on canopy biomass and structure. Quantifying disturbance location, extent, severity, and the fate of disturbed biomass will improve carbon budget estimates and lead to better initialization, parameterization, and/or testing of forest carbon cycle models. Spaceborne remote sensing maps large-scale forest disturbance occurrence, location, and extent, particularly with moderate- and fine-scale resolution passive optical/near-infrared (NIR) instruments. High-resolution remote sensing (e.g., ∼1 m passive optical/NIR, or small footprint lidar) can map crown geometry and gaps, but has rarely been systematically applied to study small-scale disturbance and natural mortality gap dynamics over large regions. Reducing uncertainty in disturbance and recovery impacts on global forest carbon balance requires quantification of (1) predisturbance forest biomass; (2) disturbance impact on standing biomass and its fate; and (3) rate of biomass accumulation during recovery. Active remote sensing data (e.g., lidar, radar) are more directly indicative of canopy biomass and many structural properties than passive instrument data; a new generation of instruments designed to generate global coverage/sampling of canopy biomass and structure can improve our ability to quantify the carbon balance of Earth\u27s forests. Generating a high-quality quantitative assessment of disturbance impacts on canopy biomass and structure with spaceborne remote sensing requires comprehensive, well designed, and well coordinated field programs collecting high-quality ground-based data and linkages to dynamical models that can use this information

Detecting Methane Ebullition In Winter From Alaskan Lakes Using Synthetic Aperture Radar Remote Sensing

Thesis (Ph.D.) University of Alaska Fairbanks, 2012Methane (CH4) is a greenhouse gas with a high radiative forcing attribute, yet large uncertainties remain in constraining atmospheric CH4 sources and sinks. While freshwater lakes are known atmospheric CH4 sources, flux through ebullition (bubbling) is difficult to quantify in situ due to uneven spatial distribution and temporally irregular gas eruptions. This heterogeneous distribution of CH4 ebullition also creates error when scaling up field measurements for flux estimations. This thesis reviews estimates of CH4 contribution to the atmosphere by freshwater lakes presented in current literature and identifies knowledge gaps and the logistical difficulties in sampling CH 4 flux via ebullition (bubbling). My research investigates various imaging parameters of space-borne synthetic aperture radar (SAR) to constrain current CH4 emissions from northern lakes. In a GIS spatial analysis of lakes on the northern Seward Peninsula, Alaska, comparing field data of ebullition to SAR, I found that SAR L-band backscatter from lake ice was high from lakes with CH4 bubbles trapped by lake ice and low from lakes with low ebullition activity. The 'roughness' component of a Pauli polarimetric decomposition of quad-pol SAR showed a significant correlation with the percentage of lake ice area containing CH4 bubbles and with CH4 ebullition flux. This indicates that the mechanism of SAR scattering from ebullition bubbles trapped by lake ice is single bounce. I conclude that SAR remote sensing could improve our ability to quantify lake ebullition at larger spatial scales than field measurements alone, could offer between-lake comparison of CH 4 ebullition activity, and is a potential tool for developing regional estimations of lake-source CH4

MAPPING FOREST STRUCTURE AND HABITAT CHARACTERISTICS USING LIDAR AND MULTI-SENSOR FUSION

This dissertation explored the combined use of lidar and other remote sensing data for improved forest structure and habitat mapping. The objectives were to quantify aboveground biomass and canopy dynamics and map habitat characteristics with lidar and /or fusion approaches. Structural metrics from lidar and spectral characteristics from hyperspectral data were combined for improving biomass estimates in the Sierra Nevada, California. Addition of hyperspectral metrics only marginally improved biomass estimates from lidar, however, predictions from lidar after species stratification of field data improved by 12%. Spatial predictions from lidar after species stratification of hyperspectral data also had lower errors suggesting this could be viable method for mapping biomass at landscape level. A combined analysis of the two datasets further showed that fusion could have considerably more value in understanding ecosystem and habitat characteristics. The second objective was to quantify canopy height and biomass changes in in the Sierra Nevada using lidar data acquired in 1999 and 2008. Direct change detection showed overall statistically significant positive height change at footprint level (ΔRH100 = 0.69 m, +/- 7.94 m). Across the landscape, ~20 % of height and biomass changes were significant with more than 60% being positive, suggesting regeneration from past disturbances and a small net carbon sink. This study added further evidence to the capabilities of waveform lidar in mapping canopy dynamics while highlighting the need for error analysis and rigorous field validation Lastly, fusion applications for habitat mapping were tested with radar, lidar and multispectral data in the Hubbard Brook Experimental Forest, New Hampshire. A suite of metrics from each dataset was used to predict multi-year presence for eight migratory songbirds with data mining methods. Results showed that fusion improved predictions for all datasets, with more than 25% improvement from radar alone. Spatial predictions from fusion were also consistent with known habitat preferences for the birds demonstrating the potential of multi- sensor fusion in mapping habitat characteristics. The main contribution of this research was an improved understanding of lidar and multi-sensor fusion approaches for applications in carbon science and habitat studies

Investigating rapid deforestation and carbon dioxide release in Bangladesh using geospatial information from remote sensing data

Rapid deforestation over the last few years due to the massive influx of refugees from neighboring Myanmar has been reported and is seen as a precursor to environmental disaster, raising the need for more effective monitoring of forest areas. The availability of data from several space-borne synthetic aperture radar (SAR) missions allow enhanced monitoring of forest areas. The objective of this study was to map deforestation in two selected areas located in northeast and southeast Bangladesh using Sentinel-1 imageries and determine the applicability of SAR in forest monitoring in Bangladesh. Towards these purpose satellite imageries from 2017 and 2018 collected by Sentinel-1A and Sentinel-1 Band SAR data in dual-polarization mode were used. In the northeastern area of interest, temporary deforestation was detected, which had occurred in low lying areas due to prolonged flooding. The second area of interest, in the southeast, revealed man-made deforestation in high land areas on an immense scale due to the influx and settlement of seven hundred thousand refugees. The results of the two sub-studies demonstrate the applicability and need of SAR data to effectively monitor deforestation in Bangladesh especially as it allows isolating natural and anthropogenic deforestation

Glacier facies of Vestfonna (Svalbard) based on SAR images and GPR measurements

The warming climate of the Arctic affects the mass budget of glaciers, and changes in the distribution of glacier facies are indicative of their response to climate change. The glacial mass budget over large land ice masses can be estimated by remote sensing techniques, but selecting an efficient remote sensing method for recognizing and mapping glacier facies in the Arctic remains a challenge. In this study, we compared several methods of distinguishing the facies of the Vestfonna ice cap, Svalbard, based upon Synthetic Aperture Radar (SAR) images and terrestrial high frequency Ground Penetrating Radar (GPR) measurements. Glacier zones as determined using the backscattering coefficient (sigma0) of SAR images were compared against GPR data, and an alternative application of Internal Reflection Energy (IRE) calculated from terrestrial GPR data was also used for differentiating the extent of glacier facies. The IRE coefficient was found to offer a suitable method for distinguishing glacier zones and for validating SAR analysis. Furthermore, results of analysis of fully polarimetric Phased Array type Lband Synthetic Aperture Radar (ALOS PALSAR) and European Remote Sensing Synthetic Aperture Radar (ERS-2 SAR) images were compared with the IRE coefficient classification. Especially promising method is H-α segmentation, where the glacier zone boundaries corresponded very well with both GPR visual interpretation and IRE classification results. The IRE coefficient's simplicity of calculation makes it a good alternative to the subjective GPR visual interpretation method, where results strongly depend on the operator's level of experience. We therefore recommend for GPR profiles to be used for additional validation of SAR image analysis in studies of glacier facies on the High Arctic ice masses

On the estimation of temporal changes of snow water equivalent by spaceborne SAR interferometry : a new application for the Sentinel-1 mission

In this work we present a methodology for the mapping of Snow Water Equivalent (SWE) temporal variations based on the Synthetic Aperture Radar (SAR) Interferometry technique and Sentinel-1 data. The shift in the interferometric phase caused by the refraction of the microwave signal penetrating the snow layer is isolated and exploited to generate maps of temporal variation of SWE from coherent SAR interferograms. The main advantage of the proposed methodology with respect to those based on the inversion of microwave SAR backscattering models is its simplicity and the reduced number of required in-situ SWE measurements. The maps, updated up to every 6 days, can attain a spatial resolution up to 20 m with sub-centimetre ASWE measurement accuracy in any weather and sun illumination condition. We present results obtained using the proposed methodology over a study area in Finland. These results are compared with in-situ measurements of ASWE, showing a reasonable match with a mean accuracy of about 6 mm.Peer reviewe