Microsimulation models incorporating both demand and supply dynamics

There has been rapid growth in interest in real-time transport strategies over the last decade, ranging from automated highway systems and responsive traffic signal control to incident management and driver information systems. The complexity of these strategies, in terms of the spatial and temporal interactions within the transport system, has led to a parallel growth in the application of traffic microsimulation models for the evaluation and design of such measures, as a remedy to the limitations faced by conventional static, macroscopic approaches. However, while this naturally addresses the immediate impacts of the measure, a difficulty that remains is the question of how the secondary impacts, specifically the effect on route and departure time choice of subsequent trips, may be handled in a consistent manner within a microsimulation framework. The paper describes a modelling approach to road network traffic, in which the emphasis is on the integrated microsimulation of individual trip-makers’ decisions and individual vehicle movements across the network. To achieve this it represents directly individual drivers’ choices and experiences as they evolve from day-to-day, combined with a detailed within-day traffic simulation model of the space–time trajectories of individual vehicles according to car-following and lane-changing rules and intersection regulations. It therefore models both day-to-day and within-day variability in both demand and supply conditions, and so, we believe, is particularly suited for the realistic modelling of real-time strategies such as those listed above. The full model specification is given, along with details of its algorithmic implementation. A number of representative numerical applications are presented, including: sensitivity studies of the impact of day-to-day variability; an application to the evaluation of alternative signal control policies; and the evaluation of the introduction of bus-only lanes in a sub-network of Leeds. Our experience demonstrates that this modelling framework is computationally feasible as a method for providing a fully internally consistent, microscopic, dynamic assignment, incorporating both within- and between-day demand and supply dynamic

Simulating the Impact of Traffic Calming Strategies

This study assessed the impact of traffic calming measures to the speed, travel times and capacity of residential roadways. The study focused on two types of speed tables, speed humps and a raised crosswalk. A moving test vehicle equipped with GPS receivers that allowed calculation of speeds and determination of speed profiles at 1s intervals were used. Multi-regime model was used to provide the best fit using steady state equations; hence the corresponding speed-flow relationships were established for different calming scenarios. It was found that capacities of residential roadway segments due to presence of calming features ranged from 640 to 730 vph. However, the capacity varied with the spacing of the calming features in which spacing speed tables at 1050 ft apart caused a 23% reduction in capacity while 350-ft spacing reduced capacity by 32%. Analysis showed a linear decrease of capacity of approximately 20 vphpl, 37 vphpl and 34 vphpl when 17 ft wide speed tables were spaced at 350 ft, 700 ft, and 1050 ft apart respectively. For speed hump calming features, spacing humps at 350 ft reduced capacity by about 33% while a 700 ft spacing reduced capacity by 30%. The study concludes that speed tables are slightly better than speed humps in terms of preserving the roadway capacity. Also, traffic calming measures significantly reduce the speeds of vehicles, and it is best to keep spacing of 630 ft or less to achieve desirable crossing speeds of less or equal to 15 mph especially in a street with schools nearby. A microscopic simulation model was developed to replicate the driving behavior of traffic on urban road diets roads to analyze the influence of bus stops on traffic flow and safety. The impacts of safety were assessed using surrogate measures of safety (SSAM). The study found that presence of a bus stops for 10, 20 and 30 s dwell times have almost 9.5%, 12%, and 20% effect on traffic speed reductions when 300 veh/hr flow is considered. A comparison of reduction in speed of traffic on an 11 ft wide road lane of a road diet due to curbside stops and bus bays for a mean of 30s with a standard deviation of 5s dwell time case was conducted. Results showed that a bus stop bay with the stated bus dwell time causes an approximate 8% speed reduction to traffic at a flow level of about 1400 vph. Analysis of the trajectories from bust stop locations showed that at 0, 25, 50, 75, 100, 125, 150, and 175 feet from the intersection the number of conflicts is affected by the presence and location of a curbside stop on a segment with a road diet

Experiences with a simplified microsimulation for the Dallas/Fort Worth area

We describe a simple framework for micro simulation of city traffic. A medium sized excerpt of Dallas was used to examine different levels of simulation fidelity of a cellular automaton method for the traffic flow simulation and a simple intersection model. We point out problems arising with the granular structure of the underlying rules of motion.Comment: accepted by Int.J.Mod.Phys.C, 20 pages, 14 figure

Integration of driver support functions: the driver's point of view

Integration of driver support functions is a key issue in the development of in-vehicle systems that assist the driver with the driving task. This paper discusses a user needs survey that provides more insight into this issue from the perspective of the driver. Car drivers are asked to indicate their needs for driver assistance during certain driving tasks (e.g. congestion driving) and circumstances (e.g. reduced visibility). From this, consequences for the integration of functions can be deduced with respect to technology, HMI and functional operation. Preliminary results of a pilot test of the user needs survey are highlighted in this paper. These results indicate starting points for integrated driver assistance, such as the adaptability of systems based on personal needs for support, and the functional integration of driver support functions, for instance with respect to inter-vehicle communication

Methodology for development of drought Severity-Duration-Frequency (SDF) Curves

Drought monitoring and early warning are essential elements impacting drought sensitive sectors such as primary production, industrial and consumptive water users. A quantitative estimate of the probability of occurrence and the anticipated severity of drought is crucial for the development of mitigating strategies. The overall aim of this study is to develop a methodology to assess drought frequency and severity and to advance the understanding of monitoring and predicting droughts in the future. Seventy (70) meteorological stations across Victoria, Australia were selected for analysis. To achieve the above objective, the analysis was initially carried out to select the most applicable meteorological drought index for Victoria. This is important because to date, no drought indices are applied across Australia by any Commonwealth agency quantifying drought impacts. An evaluation of existing meteorological drought indices namely, the Standardised Precipitation Index (SPI), the Reconnaissance Drought Index (RDI) and Deciles was first conducted to assess their suitability for the determination of drought conditions. The use of the Standardised Precipitation Index (SPI) was shown to be satisfactory for assessing and monitoring meteorological droughts in Australia. When applied to data, SPI was also successful in detecting the onset and the end of historical droughts. Temporal changes in historic rainfall variability and the trend of SPI were investigated using non-parametric trend techniques to detect wet and dry periods across Victoria, Australia. The first part of the analysis was carried out to determine annual rainfall trends using Mann Kendall (MK) and Sen’s slope tests at five selected meteorological stations with long historical records (more than 100 years), as well as a short sub-set period (1949-2011) of the same data set. It was found that different trend results were obtained for the sub-set. For SPI trend analysis, it was observed that, although different results were obtained showing significant trends, SPI gave a trend direction similar to annual precipitation (downward and upward trends). In addition, temporal trends in the rate of occurrence of drought events (i.e. inter-arrival times) were examined. The fact that most of the stations showed negative slopes indicated that the intervals between events were becoming shorter and the frequency of events was temporally increasing. Based on the results obtained from the preliminary analysis, the trend analyses were then carried out for the remaining 65 stations. The main conclusions from these analyses are summarized as follows; 1) the trend analysis was observed to be highly dependent on the start and end dates of analysis. It is recommended that in the selection of time period for the drought, trend analysis should consider the length xvi of available data sets. Longer data series would give more meaningful results, thus improving the understanding of droughts impacted by climate change. 2) From the SPI and inter-arrival drought trends, it was observed that some of the study areas in Victoria will face more frequent dry period leading to increased drought occurrence. Information similar to this would be very important to develop suitable strategies to mitigate the impacts of future droughts. The main objective of this study was the development of a methodology to assess drought risk for each region based on a frequency analysis of the drought severity series using the SPI index calculated over a 12-month duration. A novel concept centric on drought severity-duration-frequency (SDF) curves was successfully derived for all the 70 stations using an innovative threshold approach. The methodology derived using extreme value analysis will assist in the characterization of droughts and provide useful information to policy makers and agencies developing drought response plans. Using regionalisation techniques such as Cluster analysis and modified Andrews curve, the study area was separated into homogenous groups based on rainfall characteristics. In the current Victorian application the study area was separated into six homogeneous clusters with unique signatures. A set of mean SDF curves was developed for each cluster to identify the frequency and severity of the risk of drought events for various return periods in each cluster. The advantage of developing a mean SDF curve (as a signature) for each cluster is that it assists the understanding of drought conditions for an ungauged or unknown station, the characteristics of which fit existing cluster groups. Non-homogeneous Markov Chain modelling was used to estimate the probability of different drought severity classes and drought severity class predictions 1, 2 and 3 months ahead. The non-homogeneous formulation, which considers the seasonality of precipitation, is useful for understanding the evolution of drought events and for short-term planning. Overall, this model predicted drought situations 1 month ahead well. However, predictions 2 and 3 months ahead should be used with caution. Many parts of Australia including Victoria have experienced their worst droughts on record over the last decade. With the threat of climate change potentially further exacerbating droughts in the years ahead, a clear understanding of the impact of droughts is vital. The information on the probability of occurrence and the anticipated severity of drought will be helpful for water resources managers, infrastructure planners and government policy-makers with future infrastructure planning and with the design and building of more resilient communities