Quasistatic Resonators Based Triple-Mode Notched Microstrip Bandpass Filter

This article discusses new approach for design and development of triple-mode notched microstrip bandpass filter based on quasistatic resonators(QR). The proposed approach is composed of two Quasistatic resonant elements; Horizontal plane Split ring resonator (HP-SRR), Vertical plane split ring resonator (VP-SRR) and a single asymmetric step impedance resonator (A-SIR) with parallel coupled feed structure. An additional attenuation pole realized by VP-SRR in desired passband, tunes the dual-mode response to triple mode and enhances the 3dB bandwidth without changing the dimensions of basic the filter cell. The HP-SRR realizes a notch at WiMAX band (IEEE 802.11a lower band) in the desired passband. Further by changing the impedance of VP-SRR and HP-SRR both the location of additional attenuation pole frequency and notch band can be controlled. The proposed approach results in compact, notched wideband, filter design

Workshop on Advanced Technologies for Planetary Instruments, part 1

This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DoD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments

Low cost fabrication processing for microwave and millimetre-wave passive components

Microwave and millimetre-wave technology has enabled many commercial applications to play a key role in the development of wireless communication. When dissipative attenuation is a critical factor, metal-pipe waveguides are essential in the development of microwave and millimetre-wave systems. However, their cost and weight may represent a limitation for their application. In the first part of this work two 3D printing technologies and electroless plating were employed to fabricate metal pipe rectangular waveguides in X and W-band. The performance for the fabricated waveguides was comparable to the one of commercially available equivalents, showing good impedance matching and low attenuation losses. Using these technologies, a high-performance inductive iris filter in W-band and a dielectric flap phase shifter in X-band were fabricated. Eventually the design and fabrication of a phased antenna array is reported. For microwave and millimetre-wave applications, system-on-substrate technology can be considered a very valuable alternative, where bulky coax and waveguide interconnects are replaced by low-loss transmission lines embedded into a multilayer substrate, which can include a wide range of components and subsystems. In the second part of this work the integration of RF MEMS with LTCC fabrication process is investigated. Three approaches to the manufacture of suspended structures were considered, based on laser micromachining, laser bending of aluminium foil and hybrid thick/thin film technology. Although the fabrication process posed many challenges, resulting in very poor yield, two of the solution investigated showed potential for the fabrication of low-cost RF MEMS fully integrated in LTCC technology. With the experience gained with laser machining, the rapid prototyping of high aspect ratio beams for silicon MEMS was also investigated. In the third part of this work, a statistical study based on the Taguchi design of experiment and analysis of variance was undertaken. The results show a performance comparable with standard cleanroom processing, but at a fraction of the processing costs and greater design flexibility, due to the lack of need for masks.Open Acces

Characterization and modelling of software defined radio front-ends

Doutoramento em Engenharia ElectrotécnicaO presente trabalho tem por objectivo estudar a caracterização e modelação de arquitecturas de rádio frequência para aplicações em rádios definidos por software e rádios cognitivos. O constante aparecimento no mercado de novos padrões e tecnologias para comunicações sem fios têm levantado algumas limitações à implementação de transceptores rádio de banda larga. Para além disso, o uso de sistemas reconfiguráveis e adaptáveis baseados no conceito de rádio definido por software e rádio cognitivo assegurará a evolução para a próxima geração de comunicações sem fios. A ideia base desta tese passa por resolver alguns problemas em aberto e propor avanços relevantes, tirando para isso partido das capacidades providenciadas pelos processadores digitais de sinal de forma a melhorar o desempenho global dos sistemas propostos. Inicialmente, serão abordadas várias estratégias para a implementação e projecto de transceptores rádio, concentrando-se sempre na aplicabilidade específica a sistemas de rádio definido por software e rádio cognitivo. Serão também discutidas soluções actuais de instrumentação capaz de caracterizar um dispositivo que opere simultaneamente nos domínios analógico e digital, bem como, os próximos passos nesta área de caracterização e modelação. Além disso, iremos apresentar novos formatos de modelos comportamentais construídos especificamente para a descrição e caracterização não-linear de receptores de amostragem passa-banda, bem como, para sistemas nãolineares que utilizem sinais multi-portadora. Será apresentada uma nova arquitectura suportada na avaliação estatística dos sinais rádio que permite aumentar a gama dinâmica do receptor em situações de multi-portadora. Da mesma forma, será apresentada uma técnica de maximização da largura de banda de recepção baseada na utilização do receptor de amostragem passa-banda no formato complexo. Finalmente, importa referir que todas as arquitecturas propostas serão acompanhadas por uma introdução teórica e simulações, sempre que possível, sendo após isto validadas experimentalmente por protótipos laboratoriais.This work investigates the characterization and modeling of radio frequency front-ends for software defined radio and cognitive radio applications. The emergence of new standards and technologies in the wireless communications market are raising several issues to the implementation of wideband transceiver systems. Also, reconfigurable and adaptable systems based on software defined and cognitive radio models are paving the way for the next generation of wireless systems. In this doctoral thesis the fundamental idea is to address the particular open issues and propose appropriate advancements by exploring and taking profit from new capabilities of digital signal processors in a way to improve the overall performance of the novel schemes. Receiver and transmitter strategies for radio communications are summarized by concentrating on the usability for software defined radio and cognitive radio systems. Available instrumentation and next steps for analog and digital radio frequency hardware characterization is also discussed. Wideband behavioral model formats are proposed for nonlinear description and characterization of bandpass sampling receivers, as well as, for multi-carrier nonlinear systems operation. The proposed models share a great flexibility and have the freedom to be simply expanded to other fields. A new design for receiver dynamic range improvement in multi-carrier scenarios is proposed, which is supported on the useful wireless signals statistical evaluation. Additionally, receiver-side bandwidth maximization based on higher-order bandpass sampling approaches is evaluated. All the proposed designs and modeling strategies are accompanied by theoretical backgrounds and simulations whenever possible, being then experimentally validated by laboratory prototypes

Data Acquisition Applications

Data acquisition systems have numerous applications. This book has a total of 13 chapters and is divided into three sections: Industrial applications, Medical applications and Scientific experiments. The chapters are written by experts from around the world, while the targeted audience for this book includes professionals who are designers or researchers in the field of data acquisition systems. Faculty members and graduate students could also benefit from the book