Optical Dual Laser Based Sensor Denoising for OnlineMetal Sheet Flatness Measurement Using Hermite Interpolation

Flatness sensors are required for quality control of metal sheets obtained from steel coils by roller leveling and cutting systems. This article presents an innovative system for real-time robust surface estimation of flattened metal sheets composed of two line lasers and a conventional 2D camera. Laser plane triangulation is used for surface height retrieval along virtual surface fibers. The dual laser allows instantaneous robust and quick estimation of the fiber height derivatives. Hermite cubic interpolation along the fibers allows real-time surface estimation and high frequency noise removal. Noise sources are the vibrations induced in the sheet by its movements during the process and some mechanical events, such as cutting into separate pieces. The system is validated on synthetic surfaces that simulate the most critical noise sources and on real data obtained from the installation of the sensor in an actual steel mill. In the comparison with conventional filtering methods, we achieve at least a 41% of improvement in the accuracy of the surface reconstruction

Optical MEMS

Optical microelectromechanical systems (MEMS), microoptoelectromechanical systems (MOEMS), or optical microsystems are devices or systems that interact with light through actuation or sensing at a micro- or millimeter scale. Optical MEMS have had enormous commercial success in projectors, displays, and fiberoptic communications. The best-known example is Texas Instruments’ digital micromirror devices (DMDs). The development of optical MEMS was impeded seriously by the Telecom Bubble in 2000. Fortunately, DMDs grew their market size even in that economy downturn. Meanwhile, in the last one and half decade, the optical MEMS market has been slowly but steadily recovering. During this time, the major technological change was the shift of thin-film polysilicon microstructures to single-crystal–silicon microsructures. Especially in the last few years, cloud data centers are demanding large-port optical cross connects (OXCs) and autonomous driving looks for miniature LiDAR, and virtual reality/augmented reality (VR/AR) demands tiny optical scanners. This is a new wave of opportunities for optical MEMS. Furthermore, several research institutes around the world have been developing MOEMS devices for extreme applications (very fine tailoring of light beam in terms of phase, intensity, or wavelength) and/or extreme environments (vacuum, cryogenic temperatures) for many years. Accordingly, this Special Issue seeks to showcase research papers, short communications, and review articles that focus on (1) novel design, fabrication, control, and modeling of optical MEMS devices based on all kinds of actuation/sensing mechanisms; and (2) new developments of applying optical MEMS devices of any kind in consumer electronics, optical communications, industry, biology, medicine, agriculture, physics, astronomy, space, or defense

ANALYSIS OF VOCAL FOLD KINEMATICS USING HIGH SPEED VIDEO

Vocal folds are the twin in-folding of the mucous membrane stretched horizontally across the larynx. They vibrate modulating the constant air flow initiated from the lungs. The pulsating pressure wave blowing through the glottis is thus the source for voiced speech production. Study of vocal fold dynamics during voicing are critical for the treatment of voice pathologies. Since the vocal folds move at 100 - 350 cycles per second, their visual inspection is currently done by strobosocopy which merges information from multiple cycles to present an apparent motion. High Speed Digital Laryngeal Imaging(HSDLI) with a temporal resolution of up to 10,000 frames per second has been established as better suited for assessing the vocal fold vibratory function through direct recording. But the widespread use of HSDLI is limited due to lack of consensus on the modalities like features to be examined. Development of the image processing techniques which circumvents the need for the tedious and time consuming effort of examining large volumes of recording has room for improvement. Fundamental questions like the required frame rate or resolution for the recordings is still not adequately answered. HSDLI cannot get the absolute physical measurement of the anatomical features and vocal fold displacement. This work addresses these challenges through improved signal processing. A vocal fold edge extraction technique with subpixel accuracy, suited even for hard to record pediatric population is developed first. The algorithm which is equally applicable for pediatric and adult subjects, is implemented to facilitate user inspection and intervention. Objective features describing the fold dynamics, which are extracted from the edge displacement waveform are proposed and analyzed on a diverse dataset of healthy males, females and children. The sampling and quantization noise present in the recordings are analyzed and methods to mitigate them are investigated. A customized Kalman smoothing and spline interpolation on the displacement waveform is found to improve the feature estimation stability. The relationship between frame rate, spatial resolution and vibration for efficient capturing of information is derived. Finally, to address the inability to measure physical measurement, a structured light projection calibrated with respect to the endoscope is prototyped

State-of-the-art active optical techniques for three-dimensional surface metrology: a review [Invited]

This paper reviews recent developments of non-contact three-dimensional (3D) surface metrology using an active structured optical probe. We focus primarily on those active non-contact 3D surface measurement techniques that could be applicable to the manufacturing industry. We discuss principles of each technology, and its advantageous characteristics as well as limitations. Towards the end, we discuss our perspectives on the current technological challenges in designing and implementing these methods in practical applications.Purdue Universit

Phase imaging by spatial wavefront sampling

Phase-imaging techniques extract the optical path length information of a scene, whereas wavefront sensors provide the shape of an optical wavefront. Since these two applications have different technical requirements, they have developed their own specific technologies. Here we show how to perform phase imaging combining wavefront sampling using a reconfigurable spatial light modulator with a beam position detector. The result is a time-multiplexed detection scheme, capable of being shortened considerably by compressive sensing. This robust referenceless method does not require the phase-unwrapping algorithms demanded by conventional interferometry, and its lenslet-free nature removes trade-offs usually found in Shack–Hartmann sensors

Light-sheet microscopy: a tutorial

This paper is intended to give a comprehensive review of light-sheet (LS) microscopy from an optics perspective. As such, emphasis is placed on the advantages that LS microscope configurations present, given the degree of freedom gained by uncoupling the excitation and detection arms. The new imaging properties are first highlighted in terms of optical parameters and how these have enabled several biomedical applications. Then, the basics are presented for understanding how a LS microscope works. This is followed by a presentation of a tutorial for LS microscope designs, each working at different resolutions and for different applications. Then, based on a numerical Fourier analysis and given the multiple possibilities for generating the LS in the microscope (using Gaussian, Bessel, and Airy beams in the linear and nonlinear regimes), a systematic comparison of their optical performance is presented. Finally, based on advances in optics and photonics, the novel optical implementations possible in a LS microscope are highlighted.Peer ReviewedPostprint (published version

Regularized multiframe phase-shifting algorithm for three-dimensional profilometry

In many industrial inspection systems, it is required to have a high-precision three-dimensional measurement of an object under test. A popular technique is phase-measuring profilometry. In this paper, we develop some phase-shifting algorithms (PSAs). We propose a novel smoothness constraint in a regularization framework; we call this the R-PSA method and show how to obtain the desired phase measure with an iterative procedure. Both the simulation and experimental results verify the efficacy of our algorithm compared with current multiframe PSAs for interferometric measurements.published_or_final_versio