An Innovative Business Model for a Multi-echelon Supply Chain Inventory Management Pattern

Nowadays, companies are experimenting novel organizational solutions to efficiently operate in uncertain and highly dynamic scenarios. As a potential solution, this paper proposes a new business model for a multi-echelon Supply Chain inventory management pattern. Specifically, an inventory model with proactive lateral transshipments was developed and subsequently tested carrying out 288 experiments with the aim of assessing transshipments impact on the performance of a two-echelon Supply Chain. The final goal was to investigate the potential reduction of the overall cost of the enterprise and, conversely, whether this approach could promote significant improvements in the level of service, achievable through a more efficient management of resources. The analyses and simulations indicate the use of large batches and/or low-cost products did not demand the necessity of transshipment events. These preliminary findings could be potentially validated and tested in the future considering more complex networks or multiple products

A Disaster Relief Inventory Model Based on Transshipment

This research study is an effort to shed light on how transshipment may help improve the management of inventory in a disaster relief system. System dynamics simulation was used to compare inventory control and costs in a humanitarian supply chain without transshipment vs. one with transshipment. A framework for this approach is given along with the results of simulations on a system consisting of two warehouses where transshipment is allowed compared to the alternative where transshipment is not allowed. The preliminary results of this study indicate that transshipment can reduce costs and improve service to disaster victims based on inventory levels maintained in the warehouses. In some cases, transshipment may be more expensive, but this assumes the cost of replenishing inventory as a result of emergency purchase costs

Evaluating Retail Distribution Strategies During Covid-19 Pandemic in South Africa Using Best Worst Method Multicriteria Decision Technique

This paper evaluates the distribution strategies adopted by South African retailers during the Covid-19 pandemic and how such strategies have been adjusted for a more resilient post-Covid-19 world. Using the Best Worst method multicriteria decision technique and exploiting data collected from decision makers from the retail industry to rank the distribution strategies according to their level of importance, we show that omnichannel distribution strategy ranked highest, followed by direct shipment distribution capability in contributing to the success of retail distribution during the Covid-19 pandemic. On the other hand, inventory pooling, transhipment, centralised or decentralised strategy, and cross-docking ranked lower while retail distribution strategy was lowest ranked. Finally, particular emphasis must be placed on the critical factors identified in the evaluation in terms of their challenging dimension and impact as they pave way for a more capable retail resilience distribution capability

Supply Chain

Traditionally supply chain management has meant factories, assembly lines, warehouses, transportation vehicles, and time sheets. Modern supply chain management is a highly complex, multidimensional problem set with virtually endless number of variables for optimization. An Internet enabled supply chain may have just-in-time delivery, precise inventory visibility, and up-to-the-minute distribution-tracking capabilities. Technology advances have enabled supply chains to become strategic weapons that can help avoid disasters, lower costs, and make money. From internal enterprise processes to external business transactions with suppliers, transporters, channels and end-users marks the wide range of challenges researchers have to handle. The aim of this book is at revealing and illustrating this diversity in terms of scientific and theoretical fundamentals, prevailing concepts as well as current practical applications

Multiobjective Coordination Models For Maintenance And Service Parts Inventory Planning And Control

In many equipment-intensive organizations in the manufacturing, service and particularly the defense sectors, service parts inventories constitute a significant source of tactical and operational costs and consume a significant portion of capital investment. For instance, the Defense Logistics Agency manages about 4 million consumable service parts and provides about 93% of all consumable service parts used by the military services. These items required about US$1.9 billion over the fiscal years 1999-2002. During the same time, the US General Accountability Office discovered that, in the United States Navy, there were about 3.7 billion ship and submarine parts that were not needed. The Federal Aviation Administration says that 26 million aircraft parts are changed each year. In 2002, the holding cost of service parts for the aviation industry was estimated to be US$50 billion. The US Army Institute of Land Warfare reports that, at the beginning of the 2003 fiscal year, prior to Operation Iraqi Freedom the aviation service parts alone was in excess of US$1 billion. This situation makes the management of these items a very critical tactical and strategic issue that is worthy of further study. The key challenge is to maintain high equipment availability with low service cost (e.g., holding, warehousing, transportation, technicians, overhead, etc.). For instance, despite reporting US$10.5 billion in appropriations spent on purchasing service parts in 2000, the United States Air Force (USAF) continues to report shortages of service parts. The USAF estimates that, if the investment on service parts decreases to about US$5.3 billion, weapons systems availability would range from 73 to 100 percent. Thus, better management of service parts inventories should create opportunities for cost savings caused by the efficient management of these inventories. Unfortunately, service parts belong to a class of inventory that continually makes them difficult to manage. Moreover, it can be said that the general function of service parts inventories is to support maintenance actions; therefore, service parts inventory policies are highly related to the resident maintenance policies. However, the interrelationship between service parts inventory management and maintenance policies is often overlooked, both in practice and in the academic literature, when it comes to optimizing maintenance and service parts inventory policies. Hence, there exists a great divide between maintenance and service parts inventory theory and practice. This research investigation specifically considers the aspect of joint maintenance and service part inventory optimization. We decompose the joint maintenance and service part inventory optimization problem into the supplier s problem and the customer s problem. Long-run expected cost functions for each problem that include the most common maintenance cost parameters and service parts inventory cost parameters are presented. Computational experiments are conducted for a single-supplier two-echelon service parts supply chain configuration varying the number of customers in the network. Lateral transshipments (LTs) of service parts between customers are not allowed. For this configuration, we optimize the cost functions using a traditional, or decoupled, approach, where each supply chain entity optimizes its cost individually, and a joint approach, where the cost objectives of both the supplier and customers are optimized simultaneously. We show that the multiple objective optimization approach outperforms the traditional decoupled optimization approach by generating lower system-wide supply chain network costs. The model formulations are extended by relaxing the assumption of no LTs between customers in the supply chain network. Similar to those for the no LTs configuration, the results for the LTs configuration show that the multiobjective optimization outperforms the decoupled optimization in terms of system-wide cost. Hence, it is economically beneficial to jointly consider all parties within the supply network. Further, we compare the model configurations LTs versus no LTs, and we show that using LTs improves the overall savings of the system. It is observed that the improvement is mostly derived from reduced shortage costs since the equipment downtime is reduced due to the proximity of the supply. The models and results of this research have significant practical implications as they can be used to assist decision-makers to determine when and where to pre-position parts inventories to maximize equipment availability. Furthermore, these models can assist in the preparation of the terms of long-term service agreements and maintenance contracts between original equipment manufacturers and their customers (i.e., equipment owners and/or operators), including determining the equitable allocation of all system-wide cost savings under the agreement

Modeling and Controlling of an Integrated Distribution Supply Chain: Simulation Based Shipment Consolidation Heuristics

Increasing competition due to market globalization, product diversity and technological breakthroughs stimulates independent firms to collaborate in a supply chain that allows them to gain mutual benefits. This requires collective knowledge of the coordination and integration mode, including the ability to synchronize interdependent processes, to integrate information systems and to cope with distributed learning. The Integrated Supply Chain Problem (ISCP) is concerned with coordinating the supply chain tires from supplier, production, inventory and distribution delivery operations to meet customer demand with an objective to minimize the cost and maximize the supply chain service levels. In order to achieve high performance, supply chain functions must operate in an integrated and coordinated manner. Several challenging problems associated with integrated supply chain design are: (1) how to model and coordinate the supply chain business processes; (2) how to analyze the performance of an integrated supply chain network; and (3) how to evaluate the dynamic of the supply chain to obtain a comprehensive understanding of decision-making issues related to supply network configurations. These problems are most representative in the supply chain theory’s research and applications. A particular real life supply chain considered in this study involves multi echelon and multi level distribution supply chains, each echelon with its own inventory capacities and multi product types and classes. Optimally solving such an integrated problem is in general not easy due to its combinatorial nature, especially in a real life situation where a multitude of aspects and functions should be taken into consideration. In this dissertation, the simulation based heuristics solution method was implemented to effectively solve this integrated problem. A complex real life simulation model for managing the flow of material, transportation, and information considering multi products multi echelon inventory levels and capacities in upstream and downstream supply chain locations supported by an efficient Distribution Requirements Planning model (DRP) was modeled and developed named (LDNST) involving several sequential optimization phases. In calibration phase (0), the allocation of facilities to customers in the supply chain utilizing Add / Drop heuristics were implemented, that results in minimizing total distance traveled and maximizing the covering percentage. Several essential distribution strategies such as order fulfillment policy and order picking principle were defined in this phase. The results obtained in this phase were considered in further optimization solutions. The transportation function was modelled on pair to pair shipments in which no vehicle routing decision was considered, such an assumption generates two types of transportation trips, the first being Full Truck Load trips (FTL) and the second type being Less Truck Load trips (LTL). Three integrated shipment consolidation heuristics were developed and integrated into the developed simulation model to handle the potential inefficiency of low utilization and high transportation cost incurred by the LTL. The first consolidation heuristic considers a pure pull replenishment algorithm, the second is based on product clustering replenishments with a vendor managed inventory concept, and the last heuristic integrates the vendor managed inventory with advanced demand information to generate a new hybrid replenishment strategy. The main advantage of the latter strategy, over other approaches, is its ability to simultaneously optimize a lot of integrated and interrelated decisions for example, on the inventory and transportation operations without considering additional safety stock to improve the supply chain service levels. Eight product inventory allocation and distribution strategies considering different safety stock levels were designed and established to be considered as main benchmark experiments examined against the above developed replenishment strategies; appropriate selected supply chain performance measures were collected from the simulation results to distinguish any trading off between the proposed distribution strategies. Three supply chain network configurations were proposed: the first was a multi-echelon distribution system with an installation stock reorder policy; the second proposed configuration was Transshipment Point (TP) with a modified (s,S) inventory; and the last considered configuration was a Sub-TP, a special case from the second configuration. The results show that, depending on the structure of multi-echelon distribution systems and the service levels targets, both the echelon location with installation stock policy and advanced demand information replenishment strategy may be advantageous, and the impressive results and service level improvements bear this out. Considering the complexity of modeling the real life supply chain, the results obtained in this thesis reveal that there are significant differences in performance measures, such as activity based costs and network service levels. A supply chain network example is employed to substantiate the effectiveness of the proposed methodologies and algorithms