361 research outputs found
Efficient rendering for three-dimensional displays
This thesis explores more efficient methods for visualizing point data sets on three-dimensional (3D) displays. Point data sets are used in many scientific applications, e.g. cosmological simulations. Visualizing these data sets in {3D} is desirable because it can more readily reveal structure and unknown phenomena. However, cutting-edge scientific point data sets are very large and producing/rendering even a single image is expensive. Furthermore, current literature suggests that the ideal number of views for 3D (multiview) displays can be in the hundreds, which compounds the costs.
The accepted notion that many views are required for {3D} displays is challenged by carrying out a novel human factor trials study. The results suggest that humans are actually surprisingly insensitive to the number of viewpoints with regard to their task performance, when occlusion in the scene is not a dominant factor.
Existing stereoscopic rendering algorithms can have high set-up costs which limits their use and none are tuned for uncorrelated {3D} point rendering. This thesis shows that it is possible to improve rendering speeds for a low number of views by perspective reprojection. The novelty in the approach described lies in delaying the reprojection and generation of the viewpoints until the fragment stage of the pipeline and streamlining the rendering pipeline for points only. Theoretical analysis suggests a fragment reprojection scheme will render at least 2.8 times faster than na\"{i}vely re-rendering the scene from multiple viewpoints.
Building upon the fragment reprojection technique, further rendering performance is shown to be possible (at the cost of some rendering accuracy) by restricting the amount of reprojection required according to the stereoscopic resolution of the display. A significant benefit is that the scene depth can be mapped arbitrarily to the perceived depth range of the display at no extra cost than a single region mapping approach. Using an average case-study (rendering from a 500k points for a 9-view High Definition 3D display), theoretical analysis suggests that this new approach is capable of twice the performance gains than simply reprojecting every single fragment, and quantitative measures show the algorithm to be 5 times faster than a naïve rendering approach. Further detailed quantitative results, under varying scenarios, are provided and discussed
Mental and physical workload in laparoscopic surgery
Imperial Users onl
Engineering data compendium. Human perception and performance. User's guide
The concept underlying the Engineering Data Compendium was the product of a research and development program (Integrated Perceptual Information for Designers project) aimed at facilitating the application of basic research findings in human performance to the design and military crew systems. The principal objective was to develop a workable strategy for: (1) identifying and distilling information of potential value to system design from the existing research literature, and (2) presenting this technical information in a way that would aid its accessibility, interpretability, and applicability by systems designers. The present four volumes of the Engineering Data Compendium represent the first implementation of this strategy. This is the first volume, the User's Guide, containing a description of the program and instructions for its use
Recommended from our members
Camera positioning for 3D panoramic image rendering
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London.Virtual camera realisation and the proposition of trapezoidal camera architecture are the two broad contributions of this thesis. Firstly, multiple camera and their arrangement constitute a critical component which affect the integrity of visual content acquisition for multi-view video. Currently, linear, convergence, and divergence arrays are the prominent camera topologies adopted. However, the large number of cameras required and their synchronisation are two of prominent challenges usually encountered. The use of virtual cameras can significantly reduce the number of physical cameras used with respect to any of the known
camera structures, hence adequately reducing some of the other implementation issues. This thesis explores to use image-based rendering with and without geometry in the implementations leading to the realisation of virtual cameras. The virtual camera implementation was carried out from the perspective of depth map (geometry) and use of multiple image samples (no geometry). Prior to the virtual camera realisation, the generation of depth map was investigated using region match measures widely known for solving image point correspondence problem. The constructed depth maps have been compare with the ones generated
using the dynamic programming approach. In both the geometry and no geometry approaches, the virtual cameras lead to the rendering of views from a textured depth map, construction of 3D panoramic image of a scene by stitching multiple image samples and performing superposition on them, and computation
of virtual scene from a stereo pair of panoramic images. The quality of these rendered images were assessed through the use of either objective or subjective analysis in Imatest software. Further more, metric reconstruction of a scene was performed by re-projection of the pixel points from multiple image samples with
a single centre of projection. This was done using sparse bundle adjustment algorithm. The statistical summary obtained after the application of this algorithm provides a gauge for the efficiency of the optimisation step. The optimised data was then visualised in Meshlab software environment, hence providing the reconstructed scene. Secondly, with any of the well-established camera arrangements, all cameras are usually constrained to the same horizontal plane. Therefore, occlusion becomes an extremely challenging problem, and a robust camera set-up is required in order to resolve strongly the hidden part of any scene objects.
To adequately meet the visibility condition for scene objects and given that occlusion of the same scene objects can occur, a multi-plane camera structure is highly desirable. Therefore, this thesis also explore trapezoidal camera structure for image acquisition. The approach here is to assess the feasibility and potential
of several physical cameras of the same model being sparsely arranged on the edge of an efficient trapezoid graph. This is implemented both Matlab and Maya. The quality of the depth maps rendered in Matlab are better in Quality
A family of stereoscopic image compression algorithms using wavelet transforms
With the standardization of JPEG-2000, wavelet-based image and video
compression technologies are gradually replacing the popular DCT-based methods. In
parallel to this, recent developments in autostereoscopic display technology is now
threatening to revolutionize the way in which consumers are used to enjoying the
traditional 2-D display based electronic media such as television, computer and
movies. However, due to the two-fold bandwidth/storage space requirement of
stereoscopic imaging, an essential requirement of a stereo imaging system is efficient
data compression.
In this thesis, seven wavelet-based stereo image compression algorithms are
proposed, to take advantage of the higher data compaction capability and better
flexibility of wavelets. [Continues.
A family of stereoscopic image compression algorithms using wavelet transforms
With the standardization of JPEG-2000, wavelet-based image and video
compression technologies are gradually replacing the popular DCT-based methods. In
parallel to this, recent developments in autostereoscopic display technology is now
threatening to revolutionize the way in which consumers are used to enjoying the
traditional 2D display based electronic media such as television, computer and
movies. However, due to the two-fold bandwidth/storage space requirement of
stereoscopic imaging, an essential requirement of a stereo imaging system is efficient
data compression.
In this thesis, seven wavelet-based stereo image compression algorithms are
proposed, to take advantage of the higher data compaction capability and better
flexibility of wavelets. In the proposed CODEC I, block-based disparity
estimation/compensation (DE/DC) is performed in pixel domain. However, this
results in an inefficiency when DWT is applied on the whole predictive error image
that results from the DE process. This is because of the existence of artificial block
boundaries between error blocks in the predictive error image. To overcome this
problem, in the remaining proposed CODECs, DE/DC is performed in the wavelet
domain. Due to the multiresolution nature of the wavelet domain, two methods of
disparity estimation and compensation have been proposed. The first method is
performing DEJDC in each subband of the lowest/coarsest resolution level and then
propagating the disparity vectors obtained to the corresponding subbands of
higher/finer resolution. Note that DE is not performed in every subband due to the
high overhead bits that could be required for the coding of disparity vectors of all
subbands. This method is being used in CODEC II. In the second method, DEJDC is
performed m the wavelet-block domain. This enables disparity estimation to be
performed m all subbands simultaneously without increasing the overhead bits
required for the coding disparity vectors. This method is used by CODEC III.
However, performing disparity estimation/compensation in all subbands would result
in a significant improvement of CODEC III. To further improve the performance of
CODEC ill, pioneering wavelet-block search technique is implemented in CODEC
IV. The pioneering wavelet-block search technique enables the right/predicted image
to be reconstructed at the decoder end without the need of transmitting the disparity
vectors. In proposed CODEC V, pioneering block search is performed in all subbands
of DWT decomposition which results in an improvement of its performance. Further,
the CODEC IV and V are able to perform at very low bit rates(< 0.15 bpp). In
CODEC VI and CODEC VII, Overlapped Block Disparity Compensation (OBDC) is
used with & without the need of coding disparity vector. Our experiment results
showed that no significant coding gains could be obtained for these CODECs over
CODEC IV & V.
All proposed CODECs m this thesis are wavelet-based stereo image coding
algorithms that maximise the flexibility and benefits offered by wavelet transform
technology when applied to stereo imaging. In addition the use of a baseline-JPEG
coding architecture would enable the easy adaptation of the proposed algorithms
within systems originally built for DCT-based coding. This is an important feature
that would be useful during an era where DCT-based technology is only slowly being
phased out to give way for DWT based compression technology.
In addition, this thesis proposed a stereo image coding algorithm that uses JPEG-2000
technology as the basic compression engine. The proposed CODEC, named RASTER
is a rate scalable stereo image CODEC that has a unique ability to preserve the image
quality at binocular depth boundaries, which is an important requirement in the design
of stereo image CODEC. The experimental results have shown that the proposed
CODEC is able to achieve PSNR gains of up to 3.7 dB as compared to directly
transmitting the right frame using JPEG-2000
Saillance Visuelle, de la 2D à la 3D Stéréoscopique : Examen des Méthodes Psychophysique et Modélisation Computationnelle
Visual attention is one of the most important mechanisms deployed in the human visual system to reduce the amount of information that our brain needs to process. An increasing amount of efforts are being dedicated in the studies of visual attention, particularly in computational modeling of visual attention. In this thesis, we present studies focusing on several aspects of the research of visual attention. Our works can be mainly classified into two parts. The first part concerns ground truths used in the studies related to visual attention ; the second part contains studies related to the modeling of visual attention for Stereoscopic 3D (S-3D) viewing condition. In the first part, our work starts with identifying the reliability of FDM from different eye-tracking databases. Then we quantitatively identify the similarities and difference between fixation density maps and visual importance map, which have been two widely used ground truth for attention-related applications. Next, to solve the problem of lacking ground truth in the community of 3D visual attention modeling, we conduct a binocular eye-tracking experiment to create a new eye-tracking database for S-3D images. In the second part, we start with examining the impact of depth on visual attention in S-3D viewing condition. We firstly introduce a so-called "depth-bias" in the viewing of synthetic S-3D content on planar stereoscopic display. Then, we extend our study from synthetic stimuli to natural content S-3D images. We propose a depth-saliency-based model of 3D visual attention, which relies on depth contrast of the scene. Two different ways of applying depth information in S-3D visual attention model are also compared in our study. Next, we study the difference of center-bias between 2D and S-3D viewing conditions, and further integrate the center-bias with S-3D visual attention modeling. At the end, based on the assumption that visual attention can be used for improving Quality of Experience of 3D-TV when collaborating with blur, we study the influence of blur on depth perception and blur's relationship with binocular disparity.L'attention visuelle est l'un des mécanismes les plus importants mis en oeuvre par le système visuel humain (SVH) afin de réduire la quantité d'information que le cerveau a besoin de traiter pour appréhender le contenu d'une scène. Un nombre croissant de travaux est consacré à l'étude de l'attention visuelle, et en particulier à sa modélisation computationnelle. Dans cette thèse, nous présentons des études portant sur plusieurs aspects de cette recherche. Nos travaux peuvent être classés globalement en deux parties. La première concerne les questions liées à la vérité de terrain utilisée, la seconde est relative à la modélisation de l'attention visuelle dans des conditions de visualisation 3D. Dans la première partie, nous analysons la fiabilité de cartes de densité de fixation issues de différentes bases de données occulométriques. Ensuite, nous identifions quantitativement les similitudes et les différences entre carte de densité de fixation et carte d'importance visuelle, ces deux types de carte étant les vérités de terrain communément utilisées par les applications relatives à l'attention. Puis, pour faire face au manque de vérité de terrain exploitable pour la modélisation de l'attention visuelle 3D, nous procédons à une expérimentation oculométrique binoculaire qui aboutit à la création d'une nouvelle base de données avec des images stéréoscopiques 3D. Dans la seconde partie, nous commençons par examiner l'impact de la profondeur sur l'attention visuelle dans des conditions de visualisation 3D. Nous quantifions d'abord le " biais de profondeur " lié à la visualisation de contenus synthétiques 3D sur écran plat stéréoscopique. Ensuite, nous étendons notre étude avec l'usage d'images 3D au contenu naturel. Nous proposons un modèle de l'attention visuelle 3D basé saillance de profondeur, modèle qui repose sur le contraste de profondeur de la scène. Deux façons différentes d'exploiter l'information de profondeur par notre modèle sont comparées. Ensuite, nous étudions le biais central et les différences qui existent selon que les conditions de visualisation soient 2D ou 3D. Nous intégrons aussi le biais central à notre modèle de l'attention visuelle 3D. Enfin, considérant que l'attention visuelle combinée à une technique de floutage peut améliorer la qualité d'expérience de la TV-3D, nous étudions l'influence de flou sur la perception de la profondeur, et la relation du flou avec la disparité binoculaire
Space Station Human Factors Research Review. Volume 4: Inhouse Advanced Development and Research
A variety of human factors studies related to space station design are presented. Subjects include proximity operations and window design, spatial perceptual issues regarding displays, image management, workload research, spatial cognition, virtual interface, fault diagnosis in orbital refueling, and error tolerance and procedure aids
Recommended from our members
3D multiple description coding for error resilience over wireless networks
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Mobile communications has gained a growing interest from both customers and service providers alike in the last 1-2 decades. Visual information is used in many application domains such as remote health care, video –on demand, broadcasting, video surveillance etc. In order to enhance the visual effects of digital video content, the depth perception needs to be provided with the actual visual content. 3D video has earned a significant interest from the research community in recent years, due to the tremendous impact it leaves on viewers and its enhancement of the user’s quality of experience (QoE). In the near future, 3D video is likely to be used in most video applications, as it offers a greater sense of immersion and perceptual experience. When 3D video is compressed and transmitted over error prone channels, the associated packet loss leads to visual quality degradation. When a picture is lost or corrupted so severely that the concealment result is not acceptable, the receiver typically pauses video playback and waits for the next INTRA picture to resume decoding. Error propagation caused by employing predictive coding may degrade the video quality severely. There are several ways used to mitigate the effects of such transmission errors. One widely used technique in International Video Coding Standards is error resilience.
The motivation behind this research work is that, existing schemes for 2D colour video compression such as MPEG, JPEG and H.263 cannot be applied to 3D video content. 3D video signals contain depth as well as colour information and are bandwidth demanding, as they require the transmission of multiple high-bandwidth 3D video streams. On the other hand, the capacity of wireless channels is limited and wireless links are prone to various types of errors caused by noise, interference, fading, handoff, error burst and network congestion. Given the maximum bit rate budget to represent the 3D scene, optimal bit-rate allocation between texture and depth information rendering distortion/losses should be minimised. To mitigate the effect of these errors on the perceptual 3D video quality, error resilience video coding needs to be investigated further to offer better quality of experience (QoE) to end users.
This research work aims at enhancing the error resilience capability of compressed 3D video, when transmitted over mobile channels, using Multiple Description Coding (MDC) in order to improve better user’s quality of experience (QoE).
Furthermore, this thesis examines the sensitivity of the human visual system (HVS) when employed to view 3D video scenes. The approach used in this study is to use subjective testing in order to rate people’s perception of 3D video under error free and error prone conditions through the use of a carefully designed bespoke questionnaire.Petroleum Technology Development Fund (PTDF
- …