Isochronets: a High-Speed Network Switching Architecture

Traditional switching techniques need hundred- or thousand-MIPS processing power within switches to support Gbit/s transmission rates available today. These techniques anchor their decision-making on control information within transmitted frames and thus must resolve routes at the speed in which frames are being pumped into switches. Isochronets can potentially switch at any transmission rate by making switching decisions independent of frame contents. Isochronets divide network bandwidth among routing trees, a technique called Route Division Multiple Access (RDMA). Frames access network resources through the appropriate routing tree to the destination. Frame structures are irrelevant for switching decisions. Consequently, Isochronets can support multiple framing protocols without adaptation layers and are strong candidates for all-optical implementations. All network-layer functions are reduced to an admission control mechanism designed to provide quality of service (QOS) guarantees for multiple classes of traffic. The main results of this work are: (1) A new network architecture suitable for high-speed transmissions; (2) An implementation of Isochronets using cheap off-theshelf components; (3) A comparison of RDMA with more traditional switching techniques, such as Packet Switching and Circuit Switching; (4) New protocols necessary for Isochronet operations; and (5) Use of Isochronet techniques at higher layers of the protocol stack (in particular, we show how Isochronet techniques may solve routing problems in ATM networks)

Turn-Key Stabilization and Digital Control of Scalable, N GTI Resonator Based Coherent Pulse Stacking Systems

Coherent Pulse Stacking Amplification (CPSA) is a new time-domain coherent addition technique that overcomes the limitations on pulse energies achievable from optical amplifiers. It uses reflecting resonators to transform a sequence of phase- and amplitude-modulated optical pulses into a single output pulse enabling high pulse energy for fiber lasers. This thesis focuses on utilizing efficient algorithms for stabilization and optimization aspects of CPSA and developing a robust, scalable, and distributed digital control system with firmware and software integration for algorithms, to support the CPS (Coherent Pulse Stacking) application. We have presented the theoretical foundation of the stochastic parallel gradient descent (SPGD) for phase stabilization, discussed its performance criteria, its convergence, and its stability. We have presented our software and hardware development for time-domain coherent combing stabilization (specifically, an FPGA (Field Programmable Gate Array)-based Control system with software/firmware development to support stabilization and optimization algorithms). Analytical formulations of output stacked pulse profile as a function of input pulse train amplitudes and phase and stacker cavity parameters have been derived so as to build up a foundation for a GTI (Gires-Tournois-Interferometer) Cavity-based noise measurement technique. Time-domain and frequency domain characterization techniques have been presented to analyze phase and amplitude noise in the stacking system. Stacking sensitivity to errors in different control parameters (stacker cavity phase, pulse amplitude, and phases) for different stacker configurations have been analyzed. Noise measurement results using GTI cavities with different round-trip time has have been presented and we have shown how effectively the stacking phase noise in the system can be reduced by improving the noise performance of the mode-locked oscillator. Simulation and Experimental results for stabilizing different stacker configurations have been presented. Finally an algorithmic control system along with software/hardware development for optimizing amplitudes and phases of the input burst has been implemented to increase stacking fidelity. A complete detailed description, and simulation of the Genetic Algorithm as an alternative algorithm for optimizing the stacked pulse fidelity has been presented. Comparison between SPGD and Genetic Algorithm results has been done to evaluate their performance. To summarize, this thesis provides theoretical, experimental, and implementation aspects of controlling CPSA system by introducing efficient control algorithms and developing a turn-key digital control system which is scalable to large number of stacker cavities.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/147664/1/msheikhs_1.pd

Loss-free architectures in optical burst switched networks for a reliable and dynamic optical layer

For the last three decades, the optical fiber has been a quite systematic response to dimensioning issues in the Internet. Originally restricted to long haul networks, the optical network has gradually descended the network hierarchy to discard the bottlenecks. In the 90's, metropolitan networks became optical. Today, optical fibers are deployed in access networks and reach the users. In a near future, besides wireless access and local area networks, all networks in the network hierarchy may be made of fibers, in order to support current services (HDTV) and the emergence of new applications (3D-TV newly commercialized in USA). The deployment of such greedy applications will initiate an upward upgrade. The first step may be the Metropolitan Area Networks (MANs), not only because of the traffic growth, but also because of the variety of served applications, each with a specific traffic profile. The current optical layer is of mitigated efficiency, dealing with unforeseen events. The lack of reactivity is mainly due to the slow switching devices: any on-line decision of the optical layer is delayed by the configuration of the. devices. When the optical network has been extended in the MANs, a lot of efforts has been deployed to improve the reactivity of the optical layer. The Optical Circuit Switching paradigm (OCS) has been improved but it ultimately relies on off-line configuration of the optical devices. Optical Burst Switching (OBS) can be viewed as a highly flexible evolution of OCS, that operates five order of magnitude faster. Within this 'architecture, the loss-free guaranty can be abandoned in order to improve the reactivity of the optical layer. Indeed, reliability and reactivity appear as antagonists properties and getting closer to either of them mitigates the other. This thesis aims at proposing a solution to achieve reliable transmission over a dynamic optical layer. Focusing on OBS networks, our objective is to solve the contention issue without mitigating the reactivity. After the consideration of contention avoidance mechanisms with routing constraints similar as in OCS networks, we investigate the reactive solutions that intend to solve the contentions. None of the available contention resolution scheme can ensure the 100% efficiency that leads to loss-free transmission. An attractive solution is the recourse to electrical buffering, but it is notoriously disregarded because (1) it may highly impact the delays and (2) loss can occur due to buffer overflows. The efficiency of translucent architectures thus highly depends on the buffer availability, that can be improved by reducing the time spent in the buffers and the contention rate. We show that traffic grooming can highly reduce the emission delay, and consequently the buffer occupancy. In a first architecture, traffic grooming is enabled by a translucent core node architecture, capable to re-aggregate incoming bursts. The re-aggregation is mandatory to "de-groom" the bursts in the core network (i.e., to demultiplex the content of a burst). On the one hand, the re-aggregation highly reduces the loss probability, but on the other hand, it absorbs the benefits of traffic grooming. Finally, dynamic access to re-aggregation for contention resolution, despite the significant reduction of the contention rate, dramatically impacts the end-to-end delay and the memory requirement. We thus propose a second architecture, called CAROBS, that exploits traffic grooming in the optical domain. This framework is fully dynamic and can be used jointly with our translucent architecture that performs re-aggregation. As the (de)grooming operations do not involve re-aggregation, the translucent module can be restricted to contention resolution. As a result, the volume of data submitted to re-aggregation is drastically reduced and loss-free transmission can be reached with the same reactivity, end-to-end delay and memory requirement as a native OBS networ

Towards An Optimal Core Optical Network Using Overflow Channels

This dissertation is based on a traditional circuit switched core WDM network that is supplemented by a pool of wavelengths that carry optical burst switched overflow data. These overflow channels function to absorb channel overflows from traditional circuit switched networks and they also provide wavelengths for newer, high bandwidth applications. The channel overflows that appear at the overflow layer as optical bursts are either carried over a permanently configured, primary light path, or over a burst-switched, best-effort path while traversing the core network. At every successive hop along the best effort path, the optical bursts will attempt to enter a primary light path to its destination. Thus, each node in the network is a Hybrid Node that will provide entry for optical bursts to hybrid path that is made of a point to point, pre-provisioned light path or a burst switched path. The dissertation's main outcome is to determine the cost optimality of a Hybrid Route, to analyze cost-effectiveness of a Hybrid Node and compare it to a route and a node performing non-hybrid operation, respectively. Finally, an example network that consists of several Hybrid Routes and Hybrid Nodes is analyzed for its cost-effectiveness. Cost-effectiveness and optimality of a Hybrid Route is tested for its dependency on the mean and variance of channel demands offered to the route, the number of sources sharing the route, and the relative cost of a primary and overflow path called path cost ratio. An optimality condition that relates the effect of traffic statistics to the path cost ratio is analytically derived and tested. Cost-effectiveness of a Hybrid Node is compared among different switching fabric architecture that is used to construct the Hybrid Node. Broadcast-Select, Benes and Clos architectures are each considered with different degrees of chip integration. An example Hybrid Network that consists of several Hybrid Routes and Hybrid Nodes is found to be cost-effective and dependent of the ratio of switching to transport costs

Wavelength reconfigurability for next generation optical access networks

Next generation optical access networks should not only increase the capacity but also be able to redistribute the capacity on the fly in order to manage larger variations in traffic patterns. Wavelength reconfigurability is the instrument to enable such capability of network-wide bandwidth redistribution since it allows dynamic sharing of both wavelengths and timeslots in WDM-TDM optical access networks. However, reconfigurability typically requires tunable lasers and tunable filters at the user side, resulting in cost-prohibitive optical network units (ONU). In this dissertation, I propose a novel concept named cyclic-linked flexibility to address the cost-prohibitive problem. By using the cyclic-linked flexibility, the ONU needs to switch only within a subset of two pre-planned wavelengths, however, the cyclic-linked structure of wavelengths allows free bandwidth to be shifted to any wavelength by a rearrangement process. Rearrangement algorithm are developed to demonstrate that the cyclic-linked flexibility performs close to the fully flexible network in terms of blocking probability, packet delay, and packet loss. Furthermore, the evaluation shows that the rearrangement process has a minimum impact to in-service ONUs. To realize the cyclic-linked flexibility, a family of four physical architectures is proposed. PRO-Access architecture is suitable for new deployments and disruptive upgrades in which the network reach is not longer than 20 km. WCL-Access architecture is suitable for metro-access merger with the reach up to 100 km. PSB-Access architecture is suitable to implement directly on power-splitter-based PON deployments, which allows coexistence with current technologies. The cyclically-linked protection architecture can be used with current and future PON standards when network protection is required

Application of advanced on-board processing concepts to future satellite communications systems: Bibliography

Abstracts are presented of a literature survey of reports concerning the application of signal processing concepts. Approximately 300 references are included

An Overview on Application of Machine Learning Techniques in Optical Networks

Today's telecommunication networks have become sources of enormous amounts of widely heterogeneous data. This information can be retrieved from network traffic traces, network alarms, signal quality indicators, users' behavioral data, etc. Advanced mathematical tools are required to extract meaningful information from these data and take decisions pertaining to the proper functioning of the networks from the network-generated data. Among these mathematical tools, Machine Learning (ML) is regarded as one of the most promising methodological approaches to perform network-data analysis and enable automated network self-configuration and fault management. The adoption of ML techniques in the field of optical communication networks is motivated by the unprecedented growth of network complexity faced by optical networks in the last few years. Such complexity increase is due to the introduction of a huge number of adjustable and interdependent system parameters (e.g., routing configurations, modulation format, symbol rate, coding schemes, etc.) that are enabled by the usage of coherent transmission/reception technologies, advanced digital signal processing and compensation of nonlinear effects in optical fiber propagation. In this paper we provide an overview of the application of ML to optical communications and networking. We classify and survey relevant literature dealing with the topic, and we also provide an introductory tutorial on ML for researchers and practitioners interested in this field. Although a good number of research papers have recently appeared, the application of ML to optical networks is still in its infancy: to stimulate further work in this area, we conclude the paper proposing new possible research directions

Applications of satellite technology to broadband ISDN networks

Two satellite architectures for delivering broadband integrated services digital network (B-ISDN) service are evaluated. The first is assumed integral to an existing terrestrial network, and provides complementary services such as interconnects to remote nodes as well as high-rate multicast and broadcast service. The interconnects are at a 155 Mbs rate and are shown as being met with a nonregenerative multibeam satellite having 10-1.5 degree spots. The second satellite architecture focuses on providing private B-ISDN networks as well as acting as a gateway to the public network. This is conceived as being provided by a regenerative multibeam satellite with on-board ATM (asynchronous transfer mode) processing payload. With up to 800 Mbs offered, higher satellite EIRP is required. This is accomplished with 12-0.4 degree hopping beams, covering a total of 110 dwell positions. It is estimated the space segment capital cost for architecture one would be about $190M whereas the second architecture would be about$250M. The net user cost is given for a variety of scenarios, but the cost for 155 Mbs services is shown to be about $15-22/minute for 25 percent system utilization