Static Power Side-Channel Analysis of a Threshold Implementation Prototype Chip

The static power consumption of modern CMOS devices has become a substantial concern in the context of the side-channel security of cryptographic hardware. The continuous growth of the leakage power dissipation in nanometer-scaled CMOS technologies is not only inconvenient for effective low power designs, but does also create a new target for power analysis adversaries. In this paper, we present the first experimental results of a static power side-channel analysis targeting an ASIC implementation of a provably first-order secure hardware masking scheme. The investigated 150 nm CMOS prototype chip realizes the PRESENT-80 lightweight block cipher as a threshold implementation and allows us to draw a comparison between the information leakage through its dynamic and static power consumption. By employing a sophisticated measurement setup dedicated to static power analysis, including a very low-noise DC amplifier as well as a climate chamber, we are able to recover the key of our target implementation with significantly less traces compared to the corresponding dynamic power analysis attack. In particular, for a successful third-order attack exploiting the static currents, less than 200 thousand traces are needed. Whereas for the same attack in the dynamic power domain around 5 million measurements are required. Furthermore, we are able to show that only-first-order resistant approaches like the investigated threshold implementation do not significantly increase the complexity of a static power analysis. Therefore, we firmly believe that this side channel can actually become the target of choice for real-world adversaries against masking countermeasures implemented in advanced CMOS technologies

EndoTOFPET-US a Novel Multimodal Tool for Endoscopy and Positron Emission Tomography

The EndoTOFPET-US project aims to jointly exploit Time-Of-Flight Positron Emission Tomography (TOFPET) and ultrasound endoscopy with a multi-modal instrument for the development of new biomarkers for pancreas and prostate oncology. The paper outlines the functionality of the proposed instrument and the challenges for its realization. The high level of miniaturization and integration poses strong demands to the fields of scintillating crystallography, ultra-fast photon detection, highly integrated electronics and system integration. Solutions are presented to obtain a coincidence time resolution better than 200 ps and a spatial resolution of ~1 mm with an asymmetric TOFPET detector. A tracking system with better than 1 mm spatial resolution precision enables the online alignment of the system. The detector design, the production and test status of the single detecto

A scalable multi-core architecture with heterogeneous memory structures for Dynamic Neuromorphic Asynchronous Processors (DYNAPs)

Neuromorphic computing systems comprise networks of neurons that use asynchronous events for both computation and communication. This type of representation offers several advantages in terms of bandwidth and power consumption in neuromorphic electronic systems. However, managing the traffic of asynchronous events in large scale systems is a daunting task, both in terms of circuit complexity and memory requirements. Here we present a novel routing methodology that employs both hierarchical and mesh routing strategies and combines heterogeneous memory structures for minimizing both memory requirements and latency, while maximizing programming flexibility to support a wide range of event-based neural network architectures, through parameter configuration. We validated the proposed scheme in a prototype multi-core neuromorphic processor chip that employs hybrid analog/digital circuits for emulating synapse and neuron dynamics together with asynchronous digital circuits for managing the address-event traffic. We present a theoretical analysis of the proposed connectivity scheme, describe the methods and circuits used to implement such scheme, and characterize the prototype chip. Finally, we demonstrate the use of the neuromorphic processor with a convolutional neural network for the real-time classification of visual symbols being flashed to a dynamic vision sensor (DVS) at high speed.Comment: 17 pages, 14 figure

Infrastructure for Detector Research and Development towards the International Linear Collider

The EUDET-project was launched to create an infrastructure for developing and testing new and advanced detector technologies to be used at a future linear collider. The aim was to make possible experimentation and analysis of data for institutes, which otherwise could not be realized due to lack of resources. The infrastructure comprised an analysis and software network, and instrumentation infrastructures for tracking detectors as well as for calorimetry.Comment: 54 pages, 48 picture

Smart-Pixel Cellular Neural Networks in Analog Current-Mode CMOS Technology

This paper presents a systematic approach to design CMOS chips with concurrent picture acquisition and processing capabilities. These chips consist of regular arrangements of elementary units, called smart pixels. Light detection is made with vertical CMOS-BJT’s connected in a Darlington structure. Pixel smartness is achieved by exploiting the Cellular Neural Network paradigm [1], [2], incorporating at each pixel location an analog computing cell which interacts with those of nearby pixels. We propose a current-mode implementation technique and give measurements from two 16 x 16 prototypes in a single-poly double-metal CMOS n-well 1.6-µm technology. In addition to the sensory and processing circuitry, both chips incorporate light-adaptation circuitry for automatic contrast adjustment. They obtain smart-pixel densities up to 89 units/mm2, with a power consumption down to 105 µW/unit and image processing times below 2 µs

A review of advances in pixel detectors for experiments with high rate and radiation

The Large Hadron Collider (LHC) experiments ATLAS and CMS have established hybrid pixel detectors as the instrument of choice for particle tracking and vertexing in high rate and radiation environments, as they operate close to the LHC interaction points. With the High Luminosity-LHC upgrade now in sight, for which the tracking detectors will be completely replaced, new generations of pixel detectors are being devised. They have to address enormous challenges in terms of data throughput and radiation levels, ionizing and non-ionizing, that harm the sensing and readout parts of pixel detectors alike. Advances in microelectronics and microprocessing technologies now enable large scale detector designs with unprecedented performance in measurement precision (space and time), radiation hard sensors and readout chips, hybridization techniques, lightweight supports, and fully monolithic approaches to meet these challenges. This paper reviews the world-wide effort on these developments.Comment: 84 pages with 46 figures. Review article.For submission to Rep. Prog. Phy

Belle II Technical Design Report

The Belle detector at the KEKB electron-positron collider has collected almost 1 billion Y(4S) events in its decade of operation. Super-KEKB, an upgrade of KEKB is under construction, to increase the luminosity by two orders of magnitude during a three-year shutdown, with an ultimate goal of 8E35 /cm^2 /s luminosity. To exploit the increased luminosity, an upgrade of the Belle detector has been proposed. A new international collaboration Belle-II, is being formed. The Technical Design Report presents physics motivation, basic methods of the accelerator upgrade, as well as key improvements of the detector.Comment: Edited by: Z. Dole\v{z}al and S. Un

Product assurance technology for custom LSI/VLSI electronics

The technology for obtaining custom integrated circuits from CMOS-bulk silicon foundries using a universal set of layout rules is presented. The technical efforts were guided by the requirement to develop a 3 micron CMOS test chip for the Combined Release and Radiation Effects Satellite (CRRES). This chip contains both analog and digital circuits. The development employed all the elements required to obtain custom circuits from silicon foundries, including circuit design, foundry interfacing, circuit test, and circuit qualification