374,475 research outputs found
Unsupervised Contact Learning for Humanoid Estimation and Control
This work presents a method for contact state estimation using fuzzy
clustering to learn contact probability for full, six-dimensional humanoid
contacts. The data required for training is solely from proprioceptive sensors
- endeffector contact wrench sensors and inertial measurement units (IMUs) -
and the method is completely unsupervised. The resulting cluster means are used
to efficiently compute the probability of contact in each of the six
endeffector degrees of freedom (DoFs) independently. This clustering-based
contact probability estimator is validated in a kinematics-based base state
estimator in a simulation environment with realistic added sensor noise for
locomotion over rough, low-friction terrain on which the robot is subject to
foot slip and rotation. The proposed base state estimator which utilizes these
six DoF contact probability estimates is shown to perform considerably better
than that which determines kinematic contact constraints purely based on
measured normal force.Comment: Submitted to the IEEE International Conference on Robotics and
Automation (ICRA) 201
Unsupervised Contact Learning for Humanoid Estimation and Control
This work presents a method for contact state estimation using fuzzy
clustering to learn contact probability for full, six-dimensional humanoid
contacts. The data required for training is solely from proprioceptive sensors
- endeffector contact wrench sensors and inertial measurement units (IMUs) -
and the method is completely unsupervised. The resulting cluster means are used
to efficiently compute the probability of contact in each of the six
endeffector degrees of freedom (DoFs) independently. This clustering-based
contact probability estimator is validated in a kinematics-based base state
estimator in a simulation environment with realistic added sensor noise for
locomotion over rough, low-friction terrain on which the robot is subject to
foot slip and rotation. The proposed base state estimator which utilizes these
six DoF contact probability estimates is shown to perform considerably better
than that which determines kinematic contact constraints purely based on
measured normal force.Comment: Submitted to the IEEE International Conference on Robotics and
Automation (ICRA) 201
Belief Space Scheduling
This thesis develops the belief space scheduling framework for scheduling under uncertainty in Stochastic Collection and Replenishment (SCAR) scenarios. SCAR scenarios involve the transportation of a resource such as fuel to agents operating in the field. Key characteristics of this scenario are persistent operation of the agents, and consideration of uncertainty. Belief space scheduling performs optimisation on probability distributions describing the state of the system. It consists of three major components---estimation of the current system state given uncertain sensor readings, prediction of the future state given a schedule of tasks, and optimisation of the schedule of the replenishing agents. The state estimation problem is complicated by a number of constraints that act on the state. A novel extension of the truncated Kalman Filter is developed for soft constraints that have uncertainty described by a Gaussian distribution. This is shown to outperform existing estimation methods, striking a balance between the high uncertainty of methods that ignore the constraints and the overconfidence of methods that ignore the uncertainty of the constraints. To predict the future state of the system, a novel analytical, continuous-time framework is proposed. This framework uses multiple Gaussian approximations to propagate the probability distributions describing the system state into the future. It is compared with a Monte Carlo framework and is shown to provide similar discrimination performance while computing, in most cases, orders of magnitude faster. Finally, several branch and bound tree search methods are developed for the optimisation problem. These methods focus optimisation efforts on earlier tasks within a model predictive control-like framework. Combined with the estimation and prediction methods, these are shown to outperform existing approaches
Constrained Kalman Filtering via Density Function Truncation for Turbofan Engine Health Estimation
Kalman filters are often used to estimate the state variables of a dynamic system. However, in the application of Kalman filters some known signal information is often either ignored or dealt with heuristically. For instance, state variable constraints (which may be based on physical considerations) are often neglected because they do not fit easily into the structure of the Kalman filter. This article develops an analytic method of incorporating state variable inequality constraints in the Kalman filter. The resultant filter truncates the probability density function (PDF) of the Kalman filter estimate at the known constraints and then computes the constrained filter estimate as the mean of the truncated PDF. The incorporation of state variable constraints increases the computational effort of the filter but also improves its estimation accuracy. The improvement is demonstrated via simulation results obtained from a turbofan engine model. It is also shown that the truncated Kalman filter may provide a more accurate way of incorporating inequality constraints than other constrained filters (e.g. the projection approach to constrained filtering)
Single camera pose estimation using Bayesian filtering and Kinect motion priors
Traditional approaches to upper body pose estimation using monocular vision
rely on complex body models and a large variety of geometric constraints. We
argue that this is not ideal and somewhat inelegant as it results in large
processing burdens, and instead attempt to incorporate these constraints
through priors obtained directly from training data. A prior distribution
covering the probability of a human pose occurring is used to incorporate
likely human poses. This distribution is obtained offline, by fitting a
Gaussian mixture model to a large dataset of recorded human body poses, tracked
using a Kinect sensor. We combine this prior information with a random walk
transition model to obtain an upper body model, suitable for use within a
recursive Bayesian filtering framework. Our model can be viewed as a mixture of
discrete Ornstein-Uhlenbeck processes, in that states behave as random walks,
but drift towards a set of typically observed poses. This model is combined
with measurements of the human head and hand positions, using recursive
Bayesian estimation to incorporate temporal information. Measurements are
obtained using face detection and a simple skin colour hand detector, trained
using the detected face. The suggested model is designed with analytical
tractability in mind and we show that the pose tracking can be
Rao-Blackwellised using the mixture Kalman filter, allowing for computational
efficiency while still incorporating bio-mechanical properties of the upper
body. In addition, the use of the proposed upper body model allows reliable
three-dimensional pose estimates to be obtained indirectly for a number of
joints that are often difficult to detect using traditional object recognition
strategies. Comparisons with Kinect sensor results and the state of the art in
2D pose estimation highlight the efficacy of the proposed approach.Comment: 25 pages, Technical report, related to Burke and Lasenby, AMDO 2014
conference paper. Code sample: https://github.com/mgb45/SignerBodyPose Video:
https://www.youtube.com/watch?v=dJMTSo7-uF
Using Unsupervised Learning to Improve the Naive Bayes Classifier for Wireless Sensor Networks
Online processing is essential for many sensor network applications. Sensor nodes can sample far more data than what can practically be transmitted using state of the art sensor network radios. Online processing, however, is complicated due to limited resources of individual nodes. The naive Bayes classifier is an algorithm proven to be suitable for online classification on Wireless Sensor Networks. In this paper, we investigate a new technique to improve the naive Bayes classifier while maintaining sensor network compatibility. We propose the application of unsupervised learning techniques to enhance the probability density estimation needed for naive Bayes, thereby achieving the benefits of binning histogram probability density estimation without the related memory requirements. Using an offline experimental dataset, we demonstrate the possibility of matching the performance of the binning histogram approach within the constraints provided by Wireless Sensor Network hardware. We validate the feasibility of our approach using an implementation based on Arduino Nano hardware combined with NRF24L01+ radios
- …