Ultra-Low Leakage, Energy-Efficient Digital Integrated Circuit and System Design

The advances of the complementary metal-oxide-semiconductor (CMOS) technology manufacturing and design over the years have enabled a diverse range of applications across the power consumption, performance, and area (PPA) spectra. Many of the recent and prospective applications rely on the availability of energy-autonomous, miniaturized systems, i.e., ultra-low power (ULP) VLSI systems, which are generally characterized by extreme resource limitations. Some examples of applications are wireless sensing platforms, body-area sensor networks (BASN), biomedical and implantable devices, wearables, hearables, and monitors. Within the context of such applications, the key requirements are long lifetime and miniaturized size (sub-/millimeter-scale). In order to enable both requirements, energy-efficiency is the key metric. It allows for extended battery lifetime and operation with the energy that can be harvested from the environment, and it limits the size (volume) of the energy sources utilized to power these systems. Ultra-low voltage (ULV) operation is a key technique in which the VDD of circuits is reduced from nominal to near or below the threshold voltage of the transistor. It is a powerful knob that has been largely exploited by designers in order to achieve ultra-low power consumption and high energy-efficiency in CMOS. Existing ULP VLSI systems typically operate at a lower supply voltage thereby reducing their energy consumption by one to two orders of magnitude in order to enable the aforementioned applications. While supply voltage scaling is a promising measure for achieving low power and reducing energy consumption, it brings up several challenges. One critical issue is the leakage energy dissipated by the devices, which is magnified in portion to the total energy consumption at ULV. The reason is that, as VDD scales from nominal to near-threshold and sub-threshold, transistors become increasingly slower and they accumulate more leakage (i.e., static) power over longer cycle times. This energy waste accounts for a significant portion of the system's total energy consumption, offsets the gains provided by voltage scaling, defines the minimum energy per operation, and poses a practical limit for the system's energy-efficiency. This thesis presents selected research works on ultra-low leakage, energy-efficient digital integrated circuit design. More specifically, it describes novel and key techniques for minimizing the energy waste of idle/underutilized and always-on hardware. The main goal of such techniques is to push the envelope of energy-efficiency in energy-autonomous, miniaturized VLSI systems. Such techniques are applied to key building blocks of emerging mobile and embedded computing devices resulting in state-of-the-art energy-efficiencies

Ultra-Low Power Circuit Design for Cubic-Millimeter Wireless Sensor Platform.

Modern daily life is surrounded by smaller and smaller computing devices. As Bell’s Law predicts, the research community is now looking at tiny computing platforms and mm3-scale sensor systems are drawing an increasing amount of attention since they can create a whole new computing environment. Designing mm3-scale sensor nodes raises various circuit and system level challenges and we have addressed and proposed novel solutions for many of these challenges to create the first complete 1.0mm3 sensor system including a commercial microprocessor. We demonstrate a 1.0mm3 form factor sensor whose modular die-stacked structure allows maximum volume utilization. Low power I2C communication enables inter-layer serial communication without losing compatibility to standard I2C communication protocol. A dual microprocessor enables concurrent computation for the sensor node control and measurement data processing. A multi-modal power management unit allowed energy harvesting from various harvesting sources. An optical communication scheme is provided for initial programming, synchronization and re-programming after recovery from battery discharge. Standby power reduction techniques are investigated and a super cut-off power gating scheme with an ultra-low power charge pump reduces the standby power of logic circuits by 2-19× and memory by 30%. Different approaches for designing low-power memory for mm3-scale sensor nodes are also presented in this work. A dual threshold voltage gain cell eDRAM design achieves the lowest eDRAM retention power and a 7T SRAM design based on hetero-junction tunneling transistors reduces the standby power of SRAM by 9-19× with only 15% area overhead. We have paid special attention to the timer for the mm3-scale sensor systems and propose a multi-stage gate-leakage-based timer to limit the standard deviation of the error in hourly measurement to 196ms and a temperature compensation scheme reduces temperature dependency to 31ppm/°C. These techniques for designing ultra-low power circuits for a mm3-scale sensor enable implementation of a 1.0mm3 sensor node, which can be used as a skeleton for future micro-sensor systems in variety of applications. These microsystems imply the continuation of the Bell’s Law, which also predicts the massive deployment of mm3-scale computing systems and emergence of even smaller and more powerful computing systems in the near future.Ph.D.Electrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttp://deepblue.lib.umich.edu/bitstream/2027.42/91438/1/sori_1.pd

Interconnect and Memory Design for Intelligent Mobile System

Technology scaling has driven the transistor to a smaller area, higher performance and lower power consuming which leads us into the mobile and edge computing era. However, the benefits of technology scaling are diminishing today, as the wire delay and energy scales far behind that of the logics, which makes communication more expensive than computation. Moreover, emerging data centric algorithms like deep learning have a growing demand on SRAM capacity and bandwidth. High access energy and huge leakage of the large on-chip SRAM have become the main limiter of realizing an energy efficient low power smart sensor platform. This thesis presents several architecture and circuit solutions to enable intelligent mobile systems, including voltage scalable interconnect scheme, Compute-In-Memory (CIM), low power memory system from edge deep learning processor and an ultra-low leakage stacked voltage domain SRAM for low power smart image signal processor (ISP). Four prototypes are implemented for demonstration and verification. The first two seek the solutions to the slow and high energy global on-chip interconnect: the first prototype proposes a reconfigurable self-timed regenerator based global interconnect scheme to achieve higher performance and energy-efficiency in wide voltage range, while the second one presents a non Von Neumann architecture, a hybrid in-/near-memory Compute SRAM (CRAM), to address the locality issue. The next two works focus on low-power low-leakage SRAM design for Intelligent sensors. The third prototype is a low power memory design for a deep learning processor with 270KB custom SRAM and Non-Uniform Memory Access architecture. The fourth prototype is an ultra-low leakage SRAM for motion-triggered low power smart imager sensor system with voltage domain stacking and a novel array swapping mechanism. The work presented in this dissertation exploits various optimizations in both architecture level (exploiting temporal and spatial locality) and circuit customization to overcome the main challenges in making extremely energy-efficient battery-powered intelligent mobile devices. The impact of the work is significant in the era of Internet-of-Things (IoT) and the age of AI when the mobile computing systems get ubiquitous, intelligent and longer battery life, powered by these proposed solutions.PHDElectrical and Computer EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/155232/1/jiwang_1.pd

LOW POWER CIRCUITS DESIGN USING RESISTIVE NON-VOLATILE MEMORIES

Ph.DDOCTOR OF PHILOSOPH

Low-power and high-performance SRAM design in high variability advanced CMOS technology

As process technologies shrink, the size and number of memories on a chip are exponentially increasing. Embedded SRAMs are a critical component in modern digital systems, and they strongly impact the overall power, performance, and area. To promote memory-related research in academia, this dissertation introduces OpenRAM, a flexible, portable and open-source memory compiler and characterization methodology for generating and verifying memory designs across different technologies.In addition, SRAM designs, focusing on improving power consumption, access time and bitcell stability are explored in high variability advanced CMOS technologies. To have a stable read/write operation for SRAM in high variability process nodes, a differential-ended single-port 8T bitcell is proposed that improves the read noise margin, write noise margin and readout bitcell current by 45%, 48% and 21%, respectively, compared to a conventional 6T bitcell. Also, a differential-ended single-port 12T bitcell for subthreshold operation is proposed that solves the half-select disturbance and allows efficient bit-interleaving. 12T bitcell has a leakage control mechanism which helps to reduce the power consumption and provides operation down to 0.3 V. Both 8T and 12T bitcells are analyzed in a 64 kb SRAM array using 32 nm technology. Besides, to further improve the access time and power consumption, two tracking circuits (multi replica bitline delay and reconfigurable replica bitline delay techniques) are proposed to aid the generation of accurate and optimum sense amplifier set time.An error tolerant SRAM architecture suitable for low voltage video application with dynamic power-quality management is also proposed in this dissertation. This memory uses three power supplies to improve the SRAM stability in low voltages. The proposed triple-supply approach achieves 63% improvement in image quality and 69% reduction in power consumption compared to a single-supply 64 kb SRAM array at 0.70 V

Energy-Aware Data Movement In Non-Volatile Memory Hierarchies

While technology scaling enables increased density for memory cells, the intrinsic high leakage power of conventional CMOS technology and the demand for reduced energy consumption inspires the use of emerging technology alternatives such as eDRAM and Non-Volatile Memory (NVM) including STT-MRAM, PCM, and RRAM. The utilization of emerging technology in Last Level Cache (LLC) designs which occupies a signifcant fraction of total die area in Chip Multi Processors (CMPs) introduces new dimensions of vulnerability, energy consumption, and performance delivery. To be specific, a part of this research focuses on eDRAM Bit Upset Vulnerability Factor (BUVF) to assess vulnerable portion of the eDRAM refresh cycle where the critical charge varies depending on the write voltage, storage and bit-line capacitance. This dissertation broaden the study on vulnerability assessment of LLC through investigating the impact of Process Variations (PV) on narrow resistive sensing margins in high-density NVM arrays, including on-chip cache and primary memory. Large-latency and power-hungry Sense Amplifers (SAs) have been adapted to combat PV in the past. Herein, a novel approach is proposed to leverage the PV in NVM arrays using Self-Organized Sub-bank (SOS) design. SOS engages the preferred SA alternative based on the intrinsic as-built behavior of the resistive sensing timing margin to reduce the latency and power consumption while maintaining acceptable access time. On the other hand, this dissertation investigates a novel technique to prioritize the service to 1) Extensive Read Reused Accessed blocks of the LLC that are silently dropped from higher levels of cache, and 2) the portion of the working set that may exhibit distant re-reference interval in L2. In particular, we develop a lightweight Multi-level Access History Profiler to effciently identify ERRA blocks through aggregating the LLC block addresses tagged with identical Most Signifcant Bits into a single entry. Experimental results indicate that the proposed technique can reduce the L2 read miss ratio by 51.7% on average across PARSEC and SPEC2006 workloads. In addition, this dissertation will broaden and apply advancements in theories of subspace recovery to pioneer computationally-aware in-situ operand reconstruction via the novel Logic In Interconnect (LI2) scheme. LI2 will be developed, validated, and re?ned both theoretically and experimentally to realize a radically different approach to post-Moore\u27s Law computing by leveraging low-rank matrices features offering data reconstruction instead of fetching data from main memory to reduce energy/latency cost per data movement. We propose LI2 enhancement to attain high performance delivery in the post-Moore\u27s Law era through equipping the contemporary micro-architecture design with a customized memory controller which orchestrates the memory request for fetching low-rank matrices to customized Fine Grain Reconfigurable Accelerator (FGRA) for reconstruction while the other memory requests are serviced as before. The goal of LI2 is to conquer the high latency/energy required to traverse main memory arrays in the case of LLC miss, by using in-situ construction of the requested data dealing with low-rank matrices. Thus, LI2 exchanges a high volume of data transfers with a novel lightweight reconstruction method under specific conditions using a cross-layer hardware/algorithm approach

Variation-Tolerant Non-Uniform 3D Cache Management in Memory Stacked Multi-Core Processors

Process variations in integrated circuits have significant impact on their performance, leakage and stability. This is particularly evident in large, regular and dense structures such as DRAMs. DRAMs are built using minimized transistors with presumably uniform speed in an organized array structure. Process variation can introduce latency disparity among different memory arrays. With the proliferation of 3D stacking technology, DRAMs become a favorable choice for stacking on top of a multi-core processor as a last level cache for large capacity, high bandwidth, and low power. Hence, variations in bank speed create a unique problem of non-uniform cache accesses in the 3D space.In this thesis, we investigate cache management techniques for tolerating process variation in a 3D DRAM stacked onto a multi-core processor. We modeled the process variation in a 4-layer DRAM memory to characterize the latency variations among different banks. As a result, the notion of fast and slow banks from the core's standpoint is no longer associated with their physical distances with the banks. They are determined by the different bank latencies due to process variation. We develop cache migration schemes that utilize fast banks while limiting the cost due to migration. Our experiments show that there is a great performance benefit in exploiting fast memory banks through migration. On average, a variation-aware management can improve the performance of a workload over the baseline (where the speed of the slowest bank is assumed for all banks) by 17.8%. We are also only 0.45% away in performance from an ideal memory where no PV is present

High-Density Solid-State Memory Devices and Technologies

This Special Issue aims to examine high-density solid-state memory devices and technologies from various standpoints in an attempt to foster their continuous success in the future. Considering that broadening of the range of applications will likely offer different types of solid-state memories their chance in the spotlight, the Special Issue is not focused on a specific storage solution but rather embraces all the most relevant solid-state memory devices and technologies currently on stage. Even the subjects dealt with in this Special Issue are widespread, ranging from process and design issues/innovations to the experimental and theoretical analysis of the operation and from the performance and reliability of memory devices and arrays to the exploitation of solid-state memories to pursue new computing paradigms

Circuit design for embedded memory in low-power integrated circuits

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 141-152).This thesis explores the challenges for integrating embedded static random access memory (SRAM) and non-volatile memory-based on ferroelectric capacitor technology-into lowpower integrated circuits. First considered is the impact of process variation in deep-submicron technologies on SRAM, which must exhibit higher density and performance at increased levels of integration with every new semiconductor generation. Techniques to speed up the statistical analysis of physical memory designs by a factor of 100 to 10,000 relative to the conventional Monte Carlo Method are developed. The proposed methods build upon the Importance Sampling simulation algorithm and efficiently explore the sample space of transistor parameter fluctuation. Process variation in SRAM at low-voltage is further investigated experimentally with a 512kb 8T SRAM test chip in 45nm SOI CMOS technology. For active operation, an AC coupled sense amplifier and regenerative global bitline scheme are designed to operate at the limit of on current and off current separation on a single-ended SRAM bitline. The SRAM operates from 1.2 V down to 0.57 V with access times from 400ps to 3.4ns. For standby power, a data retention voltage sensor predicts the mismatch-limited minimum supply voltage without corrupting the contents of the memory. The leakage power of SRAM forces the chip designer to seek non-volatile memory in applications such as portable electronics that retain significant quantities of data over long durations. In this scenario, the energy cost of accessing data must be minimized. This thesis presents a ferroelectric random access memory (FRAM) prototype that addresses the challenges of sensing diminishingly small charge under conditions favorable to low access energy with a time-to-digital sensing scheme. The 1 Mb IT1C FRAM fabricated in 130 nm CMOS operates from 1.5 V to 1.0 V with corresponding access energy from 19.2 pJ to 9.8 pJ per bit. Finally, the computational state of sequential elements interspersed in CMOS logic, also restricts the ability to power gate. To enable simple and fast turn-on, ferroelectric capacitors are integrated into the design of a standard cell register, whose non-volatile operation is made compatible with the digital design flow. A test-case circuit containing ferroelectric registers exhibits non-volatile operation and consumes less than 1.3 pJ per bit of state information and less than 10 clock cycles to save or restore with no minimum standby power requirement in-between active periods.by Masood Qazi.Ph.D

Ultra Low-power Wireless Sensor Node Design for ECG Sensing Applications

Ubiquitous computing, such as smart homes, smart cars, and smart grid, connects our world closely so that we can easily access to the world through such virtual infrastructural systems. The ultimate vision of this is Internet of Things (IoT) through which intelligent monitoring and management is feasible via networked sensors and actuators. In this system, devices transmit sensed information, and execute instructions distributed via sensor networks. A wireless sensor network (WSN) is such a network where many sensor nodes are interconnected such that a sensor node can transmit information via its adjacent sensor nodes when physical phenomenon is detected. Accordingly, the information can be delivered to the destination through this process. The concept of WSN is also applicable to biomedical applications, especially ECG sensing applications, in a form of a sensor network, so-called body sensor network (BSN), where affixed or implanted biosignal sensors gather bio-signals and transmit them to medical providers. The main challenge of BSN is energy constraint since implanted sensor nodes cannot be replaced easily, so they should prolong with a limited amount of battery energy or by energy harvesting. Thus, we will discuss several power saving techniques in this thesis.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137081/1/hesed_1.pd