Maruchi OS kankyo o shiensuru sofutowea oyobi hadowea kino no teian

制度:新 ; 報告番号:甲3534号 ; 学位の種類:博士(工学) ; 授与年月日:2012/2/25 ; 早大学位記番号:新587

Compiler and Runtime for Memory Management on Software Managed Manycore Processors

abstract: We are expecting hundreds of cores per chip in the near future. However, scaling the memory architecture in manycore architectures becomes a major challenge. Cache coherence provides a single image of memory at any time in execution to all the cores, yet coherent cache architectures are believed will not scale to hundreds and thousands of cores. In addition, caches and coherence logic already take 20-50% of the total power consumption of the processor and 30-60% of die area. Therefore, a more scalable architecture is needed for manycore architectures. Software Managed Manycore (SMM) architectures emerge as a solution. They have scalable memory design in which each core has direct access to only its local scratchpad memory, and any data transfers to/from other memories must be done explicitly in the application using Direct Memory Access (DMA) commands. Lack of automatic memory management in the hardware makes such architectures extremely power-efficient, but they also become difficult to program. If the code/data of the task mapped onto a core cannot fit in the local scratchpad memory, then DMA calls must be added to bring in the code/data before it is required, and it may need to be evicted after its use. However, doing this adds a lot of complexity to the programmer's job. Now programmers must worry about data management, on top of worrying about the functional correctness of the program - which is already quite complex. This dissertation presents a comprehensive compiler and runtime integration to automatically manage the code and data of each task in the limited local memory of the core. We firstly developed a Complete Circular Stack Management. It manages stack frames between the local memory and the main memory, and addresses the stack pointer problem as well. Though it works, we found we could further optimize the management for most cases. Thus a Smart Stack Data Management (SSDM) is provided. In this work, we formulate the stack data management problem and propose a greedy algorithm for the same. Later on, we propose a general cost estimation algorithm, based on which CMSM heuristic for code mapping problem is developed. Finally, heap data is dynamic in nature and therefore it is hard to manage it. We provide two schemes to manage unlimited amount of heap data in constant sized region in the local memory. In addition to those separate schemes for different kinds of data, we also provide a memory partition methodology.Dissertation/ThesisPh.D. Computer Science 201

Application-aware Performance Optimization for Software Managed Manycore Architectures

abstract: One of the main goals of computer architecture design is to improve performance without much increase in the power consumption. It cannot be achieved by adding increasingly complex intelligent schemes in the hardware, since they will become increasingly less power-efficient. Therefore, parallelism comes up as the solution. In fact, the irrevocable trend of computer design in near future is still to keep increasing the number of cores while reducing the operating frequency. However, it is not easy to scale number of cores. One important challenge is that existing cores consume too much power. Another challenge is that cache-based memory hierarchy poses a serious limitation due to the rapidly increasing demand of area and power for coherence maintenance. In this dissertation, opportunities to resolve the aforementioned issues were explored in two aspects. Firstly, the possibility of removing hardware cache altogether, and replacing it with scratchpad memory with software management was explored. Scratchpad memory consumes much less power than caches. However, as data management logic is completely shifted to Software, how to reduce software overhead is challenging. This thesis presents techniques to manage scratchpad memory judiciously by exploiting application semantics and knowledge of data access patterns, thereby enabling optimization of data movement across the memory hierarchy. Experimental results show that the optimization was able to reduce stack data management overhead by 13X, produce better code mapping in more than 80% of the case, and improve performance by 83% in heap management. Secondly, the possibility of using software branch hinting to replace hardware branch prediction to completely eliminate power consumption on corresponding hardware components was explored. As branch predictor is removed from hardware, software logic is responsible for reducing branch penalty. Techniques to minimize the branch penalty by optimizing branch hint placement were proposed, which can reduce branch penalty by 35.4% over the state-of-the-art.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Scratchpad Management in Software Managed Manycore Architectures

abstract: Caches have long been used to reduce memory access latency. However, the increased complexity of cache coherence brings significant challenges in processor design as the number of cores increases. While making caches scalable is still an important research problem, some researchers are exploring the possibility of a more power-efficient SRAM called scratchpad memories or SPMs. SPMs consume significantly less area, and are more energy-efficient per access than caches, and therefore make the design of on-chip memories much simpler. Unlike caches, which fetch data from memories automatically, an SPM requires explicit instructions for data transfers. SPM-only architectures are thus named as software managed manycore (SMM), since the data movements of such architectures rely on software. SMM processors have been widely used in different areas, such as embedded computing, network processing, or even high performance computing. While SMM processors provide a low-power platform, the hardware alone does not guarantee power efficiency, if applications on such processors deliver low performance. Efficient software techniques are therefore required. A big body of management techniques for SMM architectures are compiler-directed, as inserting data movement operations by hand forces programmers to trace flow of data, which can be error-prone and sometimes difficult if not impossible. This thesis develops compiler-directed techniques to manage data transfers for embedded applications on SMMs efficiently. The techniques analyze and find out the proper program points and insert data movement instructions accordingly. The techniques manage code, stack and heap data of applications, and reduce execution time by 14%, 52% and 80% respectively compared to their predecessors on typical embedded applications. On top of managing local data, a technique is also developed for shared data in SMM architectures. Experimental results show it achieves more than 2X speedup than the previous technique on average.Dissertation/ThesisDoctoral Dissertation Computer Science 201

Software-Driven and Virtualized Architectures for Scalable 5G Networks

In this dissertation, we argue that it is essential to rearchitect 4G cellular core networks–sitting between the Internet and the radio access network–to meet the scalability, performance, and flexibility requirements of 5G networks. Today, there is a growing consensus among operators and research community that software-defined networking (SDN), network function virtualization (NFV), and mobile edge computing (MEC) paradigms will be the key ingredients of the next-generation cellular networks. Motivated by these trends, we design and optimize three core network architectures, SoftMoW, SoftBox, and SkyCore, for different network scales, objectives, and conditions. SoftMoW provides global control over nationwide core networks with the ultimate goal of enabling new routing and mobility optimizations. SoftBox attempts to enhance policy enforcement in statewide core networks to enable low-latency, signaling-efficient, and customized services for mobile devices. Sky- Core is aimed at realizing a compact core network for citywide UAV-based radio networks that are going to serve first responders in the future. Network slicing techniques make it possible to deploy these solutions on the same infrastructure in parallel. To better support mobility and provide verifiable security, these architectures can use an addressing scheme that separates network locations and identities with self-certifying, flat and non-aggregatable address components. To benefit the proposed architectures, we designed a high-speed and memory-efficient router, called Caesar, for this type of addressing schemePHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/146130/1/moradi_1.pd

Power-Efficient and Low-Latency Memory Access for CMP Systems with Heterogeneous Scratchpad On-Chip Memory

The gradually widening speed disparity of between CPU and memory has become an overwhelming bottleneck for the development of Chip Multiprocessor (CMP) systems. In addition, increasing penalties caused by frequent on-chip memory accesses have raised critical challenges in delivering high memory access performance with tight power and latency budgets. To overcome the daunting memory wall and energy wall issues, this thesis focuses on proposing a new heterogeneous scratchpad memory architecture which is configured from SRAM, MRAM, and Z-RAM. Based on this architecture, we propose two algorithms, a dynamic programming and a genetic algorithm, to perform data allocation to different memory units, therefore reducing memory access cost in terms of power consumption and latency. Extensive and intensive experiments are performed to show the merits of the heterogeneous scratchpad architecture over the traditional pure memory system and the effectiveness of the proposed algorithms

Management of Scratchpad Memory Using Programming Techniques

Consuming the conventional approaches, processors are incapable to achieve effective energy reduction. In upcoming processors on-chip memory system will be the major restriction. On-chip memories are managed by the software SMCs (Software Managed Chips), and are work with caches (on-chip), where inside a block of caches software can explicitly read as well as write specific or complete memory references, or work separately just like scratchpad memory. In embedded systems Scratch memory is generally used as an addition to caches or as a substitute of cache, but due to their comprehensive ease of programmability cache containing architectures are still to be chosen in numerous applications. In contrast to conventional caches in embedded schemes because of their better energy and silicon range effectiveness SPM (Scratch-Pad Memories) are being progressively used. Power consumption of ported applications can significantly be lower as well as portability of scratchpad architectures will be advanced with the language agnostic software management method which is suggested in this manuscript. To enhance the memory configuration and optimization on relevant architectures based on SPM, the variety of current methods are reviewed for finding the chances of optimizations and usage of new methods as well as their applicability to numerous schemes of memory management are also discussed in this paper

WCET-Aware Scratchpad Memory Management for Hard Real-Time Systems

abstract: Cyber-physical systems and hard real-time systems have strict timing constraints that specify deadlines until which tasks must finish their execution. Missing a deadline can cause unexpected outcome or endanger human lives in safety-critical applications, such as automotive or aeronautical systems. It is, therefore, of utmost importance to obtain and optimize a safe upper bound of each task’s execution time or the worst-case execution time (WCET), to guarantee the absence of any missed deadline. Unfortunately, conventional microarchitectural components, such as caches and branch predictors, are only optimized for average-case performance and often make WCET analysis complicated and pessimistic. Caches especially have a large impact on the worst-case performance due to expensive off- chip memory accesses involved in cache miss handling. In this regard, software-controlled scratchpad memories (SPMs) have become a promising alternative to caches. An SPM is a raw SRAM, controlled only by executing data movement instructions explicitly at runtime, and such explicit control facilitates static analyses to obtain safe and tight upper bounds of WCETs. SPM management techniques, used in compilers targeting an SPM-based processor, determine how to use a given SPM space by deciding where to insert data movement instructions and what operations to perform at those program locations. This dissertation presents several management techniques for program code and stack data, which aim to optimize the WCETs of a given program. The proposed code management techniques include optimal allocation algorithms and a polynomial-time heuristic for allocating functions to the SPM space, with or without the use of abstraction of SPM regions, and a heuristic for splitting functions into smaller partitions. The proposed stack data management technique, on the other hand, finds an optimal set of program locations to evict and restore stack frames to avoid stack overflows, when the call stack resides in a size-limited SPM. In the evaluation, the WCETs of various benchmarks including real-world automotive applications are statically calculated for SPMs and caches in several different memory configurations.Dissertation/ThesisDoctoral Dissertation Computer Science 201