Whole-Hand Robotic Manipulation with Rolling, Sliding, and Caging

Traditional manipulation planning and modeling relies on strong assumptions about contact. Specifically, it is common to assume that contacts are fixed and do not slide. This assumption ensures that objects are stably grasped during every step of the manipulation, to avoid ejection. However, this assumption limits achievable manipulation to the feasible motion of the closed-loop kinematic chains formed by the object and fingers. To improve manipulation capability, it has been shown that relaxing contact constraints and allowing sliding can enhance dexterity. But in order to safely manipulate with shifting contacts, other safeguards must be used to protect against ejection. “Caging manipulation,” in which the object is geometrically trapped by the fingers, can be employed to guarantee that an object never leaves the hand, regardless of constantly changing contact conditions. Mechanical compliance and underactuated joint coupling, or carefully chosen design parameters, can be used to passively create a caging grasp – protecting against accidental ejection – while simultaneously manipulating with all parts of the hand. And with passive ejection avoidance, hand control schemes can be made very simple, while still accomplishing manipulation. In place of complex control, better design can be used to improve manipulation capability—by making smart choices about parameters such as phalanx length, joint stiffness, joint coupling schemes, finger frictional properties, and actuator mode of operation. I will present an approach for modeling fully actuated and underactuated whole-hand-manipulation with shifting contacts, show results demonstrating the relationship between design parameters and manipulation metrics, and show how this can produce highly dexterous manipulators

On the Interplay between Mechanical and Computational Intelligence in Robot Hands

Researchers have made tremendous advances in robotic grasping in the past decades. On the hardware side, a lot of robot hand designs were proposed, covering a large spectrum of dexterity (from simple parallel grippers to anthropomorphic hands), actuation (from underactuated to fully actuated), and sensing capabilities (from only open/close states to tactile sensing). On the software side, grasping techniques also evolved significantly, from open-loop control, classical feedback control, to learning-based policies. However, most of the studies and applications follow the one-way paradigm that mechanical engineers/researchers design the hardware first and control/learning experts write the code to use the hand. In contrast, we aim to study the interplay between the mechanical and computational aspects in robotic grasping. We believe both sides are important but cannot solve grasping problems on their own, and both sides are highly connected by the laws of physics and should not be developed separately. We use the term "Mechanical Intelligence" to refer to the ability realized by mechanisms to appropriately respond to the external inputs, and we show that incorporating Mechanical Intelligence with Computational Intelligence is beneficial for grasping. The first part of this thesis is to derive hand underactuation mechanisms from grasp data. The mechanical coordination in robot hands, which is one type of Mechanical Intelligence, corresponds to the concept of dimensionality reduction in Machine Learning. However, the resulted low-dimensional manifolds need to be realizable using underactuated mechanisms. In this project, we first collect simulated grasp data without accounting for underactuation, apply a dimensionality reduction technique (we term it "Mechanically Realizable Manifolds") considering both pre-contact postural synergies and post-contact joint torque coordination, and finally build robot hands based on the resulted low-dimensional models. We also demonstrate a real-world application on a free-flying robot for the International Space Station. The second part is about proprioceptive grasping for unknown objects by taking advantage of hand compliance. Mechanical compliance is intrinsically connected to force/torque sensing and control. In this work, we proposed a series-elastic hand providing embodied compliance and proprioception, and an associated grasping policy using a network of proportional-integral controllers. We show that, without any prior model of the object and with only proprioceptive sensing, a robot hand can make stable grasps in a reactive fashion. The last part is about developing the Mechanical and Computational Intelligence jointly --- to co-optimize the mechanisms and control policies using deep Reinforcement Learning (RL). Traditional RL treats robot hardware as immutable and models it as part of the environment. In contrast, we move the robot hardware out of the environment, express its mechanics as auto-differentiable physics and connect it with the computational policy to create a unified policy (we term this method "Hardware as Policy"), which allows RL algorithms to back-propagate gradients w.r.t both hardware and computational parameters and optimize them in the same fashion. We present a mass-spring toy problem to illustrate this idea, and also a real-world design case of an underactuated hand. The three projects we present in this thesis are meaningful examples to demonstrate the interplay between the mechanical and computational aspects of robotic grasping. In the Conclusion part, we summarize some high-level philosophies and suggestions to integrate Mechanical and Computational Intelligence, as well as the high-level challenges that still exist when pushing this area forward

Machine Systems for Exploration and Manipulation: A Conceptual Framework and Method of Evaluation

A conceptual approach to describing and evaluating problem-solving by robotic systems is offered. One particular problem of importance to the field of robotics, disassembly, is considered. A general description is provided of an effector system equipped with sensors that interacts with objects for purposes of disassembly and that learns as a result. The system\u27s approach is bottom up, in that it has no a priori knowledge about object categories. It does, however, have pre-existing methods and strategies for exploration and manipulation. The sensors assumed to be present are vision, proximity, tactile, position, force, and thermal. The system\u27s capabilities are described with respect to two phases: object exploration and manipulation. Exploration takes the form of executing exploratory procedures, algorithms for determining the substance, structure, and mechanical properties of objects. Manipulation involves manipulatory operators, defined by the type of motion, nature of the end-effector configuration, and precise parameterization. The relation of the hypothesized system to existing implementations is described, and a means of evaluating it is also proposed

Sensing and Control for Robust Grasping with Simple Hardware

Robots can move, see, and navigate in the real world outside carefully structured factories, but they cannot yet grasp and manipulate objects without human intervention. Two key barriers are the complexity of current approaches, which require complicated hardware or precise perception to function effectively, and the challenge of understanding system performance in a tractable manner given the wide range of factors that impact successful grasping. This thesis presents sensors and simple control algorithms that relax the requirements on robot hardware, and a framework to understand the capabilities and limitations of grasping systems.Engineering and Applied Science

Neural extrapolation of motion for a ball rolling down an inclined plane

It is known that humans tend to misjudge the kinematics of a target rolling down an inclined plane. Because visuomotor responses are often more accurate and less prone to perceptual illusions than cognitive judgments, we asked the question of how rolling motion is extrapolated for manual interception or drawing tasks. In three experiments a ball rolled down an incline with kinematics that differed as a function of the starting position (4 different positions) and slope (30°, 45° or 60°). In Experiment 1, participants had to punch the ball as it fell off the incline. In Experiment 2, the ball rolled down the incline but was stopped at the end; participants were asked to imagine that the ball kept moving and to punch it. In Experiment 3, the ball rolled down the incline and was stopped at the end; participants were asked to draw with the hand in air the trajectory that would be described by the ball if it kept moving. We found that performance was most accurate when motion of the ball was visible until interception and haptic feedback of hand-ball contact was available (Experiment 1). However, even when participants punched an imaginary moving ball (Experiment 2) or drew in air the imaginary trajectory (Experiment 3), they were able to extrapolate to some extent global aspects of the target motion, including its path, speed and arrival time. We argue that the path and kinematics of a ball rolling down an incline can be extrapolated surprisingly well by the brain using both visual information and internal models of target motion

From Deployments Of Elder Care Service Robots To The Design Of Affordable Low-Complexity End-Effectors And Novel Manipulation Techniques

This thesis proposes an investigation on both behavioral and technical aspects of human-robot interaction (HRI) in elder care settings, in view of an affordable platform capable of executing desired tasks. The behavioral investigation combines a qualitative study with focus groups and surveys from not only the elders’ standpoint, but also from the standpoint of healthcare professionals to investigate suitable tasks to be accomplished by a service robot in such environments. Through multiple deployments of various robot embodiments at actual elder care facilities (such as at a low-income Supportive Apartment Living, SAL, and Program of All-Inclusive Care, PACE Centers) and interaction with older adults, design guidelines are developed to improve on both interaction and usability aspects. This need assessment informed the technical investigation of this work, where we initially propose picking and placing objects using end-effectors without internal mobility (or zero degrees-of-freedom, DOF), considering both quasi-static (tipping and regrasping as in-hand manipulation) and dynamic approaches. Maximizing grasping versatility by allowing robots to grasp multiple objects sequentially using a single end-effector and actuator is also proposed. These novel manipulation techniques and end-effector designs focus on minimizing robot hardware usage and cost, while still performing complex tasks and complying with safety constraints imposed by the elder care facilities

Modelling and Interactional Control of a Multi-fingered Robotic Hand for Grasping and Manipulation.

PhDIn this thesis, the synthesis of a grasping and manipulation controller of the Barrett hand, which is an archetypal example of a multi-fingered robotic hand, is investigated in some detail. This synthesis involves not only the dynamic modelling of the robotic hand but also the control of the joint and workspace dynamics as well as the interaction of the hand with object it is grasping and the environment it is operating in. Grasping and manipulation of an object by a robotic hand is always challenging due to the uncertainties, associated with non-linearities of the robot dynamics, unknown location and stiffness parameters of the objects which are not structured in any sense and unknown contact mechanics during the interaction of the hand’s fingers and the object. To address these challenges, the fundamental task is to establish the mathematical model of the robot hand, model the body dynamics of the object and establish the contact mechanics between the hand and the object. A Lagrangian based mathematical model of the Barrett hand is developed for controller implementation. A physical SimMechanics based model of the Barrett hand is also developed in MATLAB/Simulink environment. A computed torque controller and an adaptive sliding model controller are designed for the hand and their performance is assessed both in the joint space and in the workspace. Stability analysis of the controllers are carried out before developing the control laws. The higher order sliding model controllers are developed for the position control assuming that the uncertainties are in place. Also, this controllers enhance the performance by reducing chattering of the control torques applied to the robot hand. A contact model is developed for the Barrett hand as its fingers grasp the object in the operating environment. The contact forces during the simulation of the interaction of the fingers with the object were monitored, for objects with different stiffness values. Position and force based impedance controllers are developed to optimise the contact force. To deal with the unknown stiffness of the environment, adaptation is implemented by identifying the impedance. An evolutionary algorithm is also used to estimate the desired impedance parameters of the dynamics of the coupled robot and compliant object. A Newton-Euler based model is developed for the rigid object body. A grasp map and a hand Jacobian are defined for the Barrett hand grasping an object. A fixed contact model with friction is considered for the grasping and the manipulation control. The compliant dynamics of Barrett hand and object is developed and the control problem is defined in terms of the contact force. An adaptive control framework is developed and implemented for different grasps and manipulation trajectories of the Barrett hand. The adaptive controller is developed in two stages: first, the unknown robot and object dynamics are estimated and second, the contact force is computed from the estimated dynamics. The stability of the controllers is ensured by applying Lyapunov’s direct method

Modeling, analysis and control of robot-object nonsmooth underactuated Lagrangian systems: A tutorial overview and perspectives

International audienceSo-called robot-object Lagrangian systems consist of a class of nonsmooth underactuated complementarity Lagrangian systems, with a specific structure: an "object" and a "robot". Only the robot is actuated. The object dynamics can thus be controlled only through the action of the contact Lagrange multipliers, which represent the interaction forces between the robot and the object. Juggling, walking, running, hopping machines, robotic systems that manipulate objects, tapping, pushing systems, kinematic chains with joint clearance, crawling, climbing robots, some cable-driven manipulators, and some circuits with set-valued nonsmooth components, belong this class. This article aims at presenting their main features, then many application examples which belong to the robot-object class, then reviewing the main tools and control strategies which have been proposed in the Automatic Control and in the Robotics literature. Some comments and open issues conclude the article

Advanced Knowledge Application in Practice

The integration and interdependency of the world economy leads towards the creation of a global market that offers more opportunities, but is also more complex and competitive than ever before. Therefore widespread research activity is necessary if one is to remain successful on the market. This book is the result of research and development activities from a number of researchers worldwide, covering concrete fields of research