FARM COMPUTER ADOPTION IN THE GREAT PLAINS

Computers change rapidly, yet the last survey on computer use in agriculture was in 1991. We surveyed Great Plains producers in 1995 and used logit analysis to characterize adopters and non-adopters. About 37% of these producers use computers which is consistent with the general population. We confirmed previous surveys emphasizing the importance of education, age/experience, and other farm characteristics on adoption. However, we also found that education and experience may no longer be a significant influence. Future research and education could focus on when and where computers are most needed, and therefore when adoption is most appropriate.adoption, agriculture, computers, farmers, Great Plains, logit, Farm Management,

A comparison of forensic toolkits and mass market data recovery applications

Digital forensic application suites are large, expensive, complex software products, offering a range of functions to assist in the investigation of digital artifacts. Several authors have raised concerns as to the reliability of evidence derived from these products. This is of particular concern, given that many forensic suites are closed source and therefore can only be subject to black box evaluation. In addition, many of the individual functions integrated into forensic suites are available as commercial stand-alone products, typically at a much lower cost, or even free. This paper reports research which compared (rather than individually evaluated) the data recovery function of two forensic suites and three stand alone `non-forensic' commercial applications. The research demonstrates that, for this function at least, the commercial data recovery tools provide comparable performance to that of the forensic software suites. In addition, the research demonstrates that there is some variation in results presented by all of the data recovery tools

A decentralized framework for cross administrative domain data sharing

Federation of messaging and storage platforms located in remote datacenters is an essential functionality to share data among geographically distributed platforms. When systems are administered by the same owner data replication reduces data access latency bringing data closer to applications and enables fault tolerance to face disaster recovery of an entire location. When storage platforms are administered by different owners data replication across different administrative domains is essential for enterprise application data integration. Contents and services managed by different software platforms need to be integrated to provide richer contents and services. Clients may need to share subsets of data in order to enable collaborative analysis and service integration. Platforms usually include proprietary federation functionalities and specific APIs to let external software and platforms access their internal data. These different techniques may not be applicable to all environments and networks due to security and technological restrictions. Moreover the federation of dispersed nodes under a decentralized administration scheme is still a research issue. This thesis is a contribution along this research direction as it introduces and describes a framework, called \u201cWideGroups\u201d, directed towards the creation and the management of an automatic federation and integration of widely dispersed platform nodes. It is based on groups to exchange messages among distributed applications located in different remote datacenters. Groups are created and managed using client side programmatic configuration without touching servers. WideGroups enables the extension of the software platform services to nodes belonging to different administrative domains in a wide area network environment. It lets different nodes form ad-hoc overlay networks on-the-fly depending on message destinations located in distinct administrative domains. It supports multiple dynamic overlay networks based on message groups, dynamic discovery of nodes and automatic setup of overlay networks among nodes with no server-side configuration. I designed and implemented platform connectors to integrate the framework as the federation module of Message Oriented Middleware and Key Value Store platforms, which are among the most widespread paradigms supporting data sharing in distributed systems

USING NAMING CONVENTIONS TO FACILITATE DATA TRANSFER BETWEEN ASSET MANAGEMENT SYSTEMS AND BUILDING INFORMATION MODELS

An improvement to the workflow developed by Loeh et al. (2021) is proposed using a Revit template with BUILDER SMS naming conventions when creating the Sustainable Facility Management-enhanced BIM Model. The method presented by Loeh et al. (2021) is modified by integrating BUILDER SMS parameters and naming conventions into the BIM model during, as opposed to after, the creation of the model. Four building models created in 2020-21, four from 2021-22, and one building from 2019 were used in this study. Two groups of students were used to evaluate the effect of the building-specific BIM templates. Evaluating the 2020 and 2021 group\u27s progress logs\u27 milestone completion times using the T-test and ANOVA indicated that using the building-specific BIM template did not take significantly more time than allowing model builders complete freedom regarding naming conventions when creating BIM models. The initial time commitment required to create the building-specific template makes it easier to identify the location of elements in the model. Developing the Revit model with the BUILDER SMS naming convention in mind creates a compatible BIM model for transferring data

The LIFE2 final project report

Executive summary: The first phase of LIFE (Lifecycle Information For E-Literature) made a major contribution to understanding the long-term costs of digital preservation; an essential step in helping institutions plan for the future. The LIFE work models the digital lifecycle and calculates the costs of preserving digital information for future years. Organisations can apply this process in order to understand costs and plan effectively for the preservation of their digital collections The second phase of the LIFE Project, LIFE2, has refined the LIFE Model adding three new exemplar Case Studies to further build upon LIFE1. LIFE2 is an 18-month JISC-funded project between UCL (University College London) and The British Library (BL), supported by the LIBER Access and Preservation Divisions. LIFE2 began in March 2007, and completed in August 2008. The LIFE approach has been validated by a full independent economic review and has successfully produced an updated lifecycle costing model (LIFE Model v2) and digital preservation costing model (GPM v1.1). The LIFE Model has been tested with three further Case Studies including institutional repositories (SHERPA-LEAP), digital preservation services (SHERPA DP) and a comparison of analogue and digital collections (British Library Newspapers). These Case Studies were useful for scenario building and have fed back into both the LIFE Model and the LIFE Methodology. The experiences of implementing the Case Studies indicated that enhancements made to the LIFE Methodology, Model and associated tools have simplified the costing process. Mapping a specific lifecycle to the LIFE Model isn’t always a straightforward process. The revised and more detailed Model has reduced ambiguity. The costing templates, which were refined throughout the process of developing the Case Studies, ensure clear articulation of both working and cost figures, and facilitate comparative analysis between different lifecycles. The LIFE work has been successfully disseminated throughout the digital preservation and HE communities. Early adopters of the work include the Royal Danish Library, State Archives and the State and University Library, Denmark as well as the LIFE2 Project partners. Furthermore, interest in the LIFE work has not been limited to these sectors, with interest in LIFE expressed by local government, records offices, and private industry. LIFE has also provided input into the LC-JISC Blue Ribbon Task Force on the Economic Sustainability of Digital Preservation. Moving forward our ability to cost the digital preservation lifecycle will require further investment in costing tools and models. Developments in estimative models will be needed to support planning activities, both at a collection management level and at a later preservation planning level once a collection has been acquired. In order to support these developments a greater volume of raw cost data will be required to inform and test new cost models. This volume of data cannot be supported via the Case Study approach, and the LIFE team would suggest that a software tool would provide the volume of costing data necessary to provide a truly accurate predictive model

Quantification of Construction Waste in Early Design Stages Using Bim-Based Tool

Construction and demolition waste represents a growing environmental, social, and economic problem, and has become a priority for European and worldwide policies. The early quantification of construction waste is essential for the minimisation of its production and the improvement of waste management. This requires the development of design-based tools that enable a better understanding of the expected waste produced during the construction phase. Building Information Modelling (BIM) methodologies have gained recognition in the Architecture, Engineering, Construction, and Operations (AECO) sector, largely due to their capacity for data simulation, storage, and management during the building design phase. This study presents a software application, called WE-BIM Add-in, to quantify construction waste (CW) while designing the BIM model in Revit. A validated CW quantification model which enables waste types and quantities per building element to be predicted in detail according to the European List of Waste (LoW) is integrated into the Revit workflow. Design alternatives could be effortlessly simulated in real time to assist practitioners in decision-making during the early design stages. Two alternative structural systems of a Spanish residential building were compared: a reinforced concrete structure, Option 1 (O1), and a steel structure, Option 2 (O2). The results were obtained automatically: O2, in addition to reducing 56% of O1′s waste, would have increased the waste recycling rate by 49%; and displayed in Revit, thereby remaining consistent with those of other studies that compare prefabricated systems with in situ systems. This work provides a basis for future research into the automated estimation of construction waste in BIM which could become a useful tool in waste-prevention policies

DESIGN OF WPI MIXED-USE FACILITY FOR GATEWAY PARK

The project investigated preliminary design layouts as well as structural frame and construction plan for Lot 3 commercial building of the Gateway Park expansion at Worcester Polytechnic Institute. A structural design, including an additional floor featuring an open-style conference center, was established following investigations of structural steel and reinforced concrete. Elements of the foundation system were also designed. A phased construction plan, project schedule and cost estimate were prepared and submitted as project deliverables

DESIGN_OF_WPI_MIXED-USE_FACILITY_FOR_GATEWAY_PARK

The project investigated preliminary design layouts as well as structural frame and construction plan for Lot 3 commercial building of the Gateway Park expansion at Worcester Polytechnic Institute. A structural design, including an additional floor featuring an open-style conference center, was established following investigations of structural steel and reinforced concrete. Elements of the foundation system were also designed. A phased construction plan, project schedule and cost estimate were prepared and submitted as project deliverables