150 research outputs found

    Near-Instantaneously Adaptive HSDPA-Style OFDM Versus MC-CDMA Transceivers for WIFI, WIMAX, and Next-Generation Cellular Systems

    No full text
    Burts-by-burst (BbB) adaptive high-speed downlink packet access (HSDPA) style multicarrier systems are reviewed, identifying their most critical design aspects. These systems exhibit numerous attractive features, rendering them eminently eligible for employment in next-generation wireless systems. It is argued that BbB-adaptive or symbol-by-symbol adaptive orthogonal frequency division multiplex (OFDM) modems counteract the near instantaneous channel quality variations and hence attain an increased throughput or robustness in comparison to their fixed-mode counterparts. Although they act quite differently, various diversity techniques, such as Rake receivers and space-time block coding (STBC) are also capable of mitigating the channel quality variations in their effort to reduce the bit error ratio (BER), provided that the individual antenna elements experience independent fading. By contrast, in the presence of correlated fading imposed by shadowing or time-variant multiuser interference, the benefits of space-time coding erode and it is unrealistic to expect that a fixed-mode space-time coded system remains capable of maintaining a near-constant BER

    Oblique Sounding and HF Communication Techniques for Very Long Haul Ionospheric Links

    Get PDF
    El sistema de comunicació ràdio d’alta freqüència (HF, en anglès) és usat arreu del món per agències governamentals i no governamentals sempre que calgui una alternativa a les comunicacions via satèl•lit: vaixells a alta mar, avions fora de cobertura de xarxes ràdio amb visió directa, operacions militars, zones on la infraestructura ha estat destruïda per algun tipus de desastre o bé zones llunyanes sense cap altre tipus de comunicació. La ràdio HF representa una alternativa, o un sistema de backup al satèl•lit per a comunicacions de llarg abast i en redueix els costos, evita la vulnerabilitat i els problemes de sobirania. En aquesta tesi s’ha estudiat l’enllaç HF entre la base antàrtica espanyola Juan Carlos I, situada a l’illa Livingston a l’arxipèlag de les Shetland del Sud, i Espanya. L’objectiu d’aquest treball és estudiar els problemes que afecten la propagació; és a dir, la relació senyal a soroll i interferència, la dispersió multicamí i la dispersió per efecte Doppler, i dissenyar la capa física d’un enllaç HF de baixa velocitat, poca potència i llarg abast. Pel que fa aquest últim punt es fan un parell de propostes: espectre eixamplat per seqüència directa (DSSS, en anglès) i multiplexació per divisió en freqüència ortogonal (OFDM, en anglès). El repte que es planteja és el de la definició de les característiques dels símbols que millor encaixen en aquest canal per tal d’obtenir un benefici de la diversitat temporal i freqüencial que ofereix el canal. Des de l’any 2003 diverses campanyes han permès estudiar aquest canal HF, però no va ser fins la campanya 2009/2010 que s’obtingué un foto de les característiques, diürnes i nocturnes, de la ionosfera. En els articles que es presenten en aquesta tesi hem estès el rang freqüencial d’estudi respecte a investigacions prèvies i hem mostrat diferències de comportament entre el dia i la nit. Hem usat els resultats de la caracterització del canal per a dissenyar i comparar la bondat dels símbols DSSS i OFDM. Ambdues possibilitats han resultat ser candidates a implementar l’enllaç HF entre l’Antàrtida i Espanya. Tot i així, ambdues tècniques representen visions diferents de la implementació del mòdem: mentre que DSSS obté bons resultats a baixa velocitat en entorns amb baixa relació senyal a soroll, OFDM aconsegueix tasses de velocitat més elevades en canals més benignes.Los sistemas de radio de alta frecuencia (HF, en inglés) son usados por agencias gubernamentales y no gubernamentales en todo el mundo siempre que se necesite una alternativa a las comunicaciones por satélite: barcos en alta mar, aviones fuera del rango de cobertura de las redes radio de visión directa, operaciones militares, zonas donde la infraestructura ha sido destruida por algún desastre. Ésta ofrece una alternativa, o representa un sistema de backup, a las comunicaciones vía satélite, evitando los costes, la vulnerabilidad y los problemas de soberanía de las comunicaciones por satélite. En esta tesis se ha estudiado el enlace HF entre la base antártica española Juan Carlos I en la isla Livingston, en las Shetland del sur y España. El objetivo de este trabajo es el estudio de las limitaciones de la propagación ionosférica (como la relación señal a ruido e interferencia, la dispersión multicamino y la dispersión por efecto Doppler) y el diseño de la capa física de un enlace HF de baja velocidad, baja potencia y largo alcance. Se han estudiado un par de propuestas para este enlace, como son el espectro ensanchado por secuencia directa (DSSS, en inglés) y la multiplexación por división en frecuencia ortogonal (OFDM, en inglés). El reto ha sido definir las características que mejor se adecuan a este enlace para poder aprovechar la diversidad temporal y frecuencial que ofrece el canal HF. Desde el año 2003 diversas campañas de sondeo han permitido estudiar el canal HF pero no es hasta la campaña 2009/2010 que se consigue una fotografía de la actividad ionosférica tanto nocturna como diurna. En los artículos que se presentan en esta tesis hemos extendido los estudios previos a todo el rango de frecuencias HF y hemos mostrado las diferencias entre el día y la noche. Hemos usado estos resultados de caracterización del canal para diseñar y comparar símbolos DSSS y símbolos OFDM. Ambas posibilidades han resultado ser posibles candidatas para implementar un enlace HF de baja velocidad entre la Antártida y España. Sin embargo ambas técnicas representan dos aproximaciones distintas a la implementación del módem. Mientras que DSSS consigue un buen funcionamiento a baja velocidad en escenarios con baja relación señal a ruido, OFDM consigue tasas de transmisión más altas en escenarios más benignos.High Frequency (HF) radio is used by governmental and non nongovernmental agencies worldwide whenever an alternative to satellites for sky wave communication is needed: ships at sea, aircraft out of range of line-of-sight radio networks, military operations, disaster areas with communication infrastructure destroyed or distant regions lacking other communications. It offers an alternative to satellites, or a backup, for long-haul communications, thus avoiding the costs, vulnerabilities and sovereignty concerns of satellite communications. In this thesis the HF link between the Antarctic Spanish Station Juan Carlos I in Livingston Island, South Shetlands and Spain is studied. The aim of this study is to address the impairments that affect HF propagation (i.e., signal-to-noise plus interference ratio, multipath and Doppler shift and spread) and to design the physical layer of a low rate, low power and long-haul HF link. Some proposals regarding this last issue are addressed, i.e., direct sequence spread spectrum (DSSS) and orthogonal frequency division multiplexing (OFDM). The challenge is to define the symbol characteristics that best fit the link to benefit from time and frequency diversity that offers the HF channel. Since 2003 several transmission campaigns have allowed to study the HF channel but it is not until the 2009/2010 campaign that we have achieved a whole picture of both diurnal and nocturnal ionospheric activity. In the papers presented in this thesis we have extended the previous research to the whole range of HF frequencies and we have shown the differences on performance between day and night. We have used the results from channel characterization to design and compare the performance of DSSS and OFDM symbols. Both techniques have turned out to be possible candidates to implement a low rate HF link between Antarctica and Spain. However, both techniques stand for different approaches of the modem: DSSS achieves good performance at low data rate in low SNR scenarios, whereas OFDM achieves higher data rate in benign channel

    Design of a High Data Rate Audio Band OFDM Modem

    Get PDF
    Land mobile radio technology (LMR) has existed since the early 1920\u27s. The most visible manifestation of this technology is the handheld VHF/UHF radios also referred to as \u27walkie-talkie\u27. These handheld devices are one of the most ubiquitous forms of radio communication systems. Most of them are designed for transmitting analog voice signals. Due to an increase in the amount of digitized analog signals over the past few years complemented by a need for transmitting pure digital data, there has been a desire to transmit digital data. There are methods which allow the analog radios to transmit digital data without any modifications; however the data rate achievable using these methods is very low. In contrast, the digital variants of these hand-held radios are capable of transmitting digital data at comparatively higher data rates. However they are expensive and require major infrastructure overhauls. In this thesis, a prototype modem was developed which interfaces with an analog radio without any modifications to the radio. Furthermore, the data rates achievable are comparable with those achieved using digital radios. The modem uses Orthogonal Frequency Division Multiplexing (OFDM) technique to generate an audio band signal which is fed to the radio. The OFDM technique used to generate the audio band signal from data bits ensures maximum bandwidth efficiency. The developed modem is capable of communicating over Ethernet connection. It uses a RJ 45 interface to connect to a data source

    An Investigation into the Implementation and Performance of Spectrally Shaped Orthogonal Frequency Division Multiplex

    Get PDF
    Orthogonal Frequency Division Multiplex (OFDM) is a flexible, robust multi-carrier modulation scheme. The orthogonal spectral shaping and spacing of OFDM sub-carriers ensure that their spectra can be over-lapped without leading to undesirable inter-carrier interference. Conventional OFDM systems have non-band limited Sinc(x) shaped subcarrier spectra. An alternative form of OFDM, referred to hereafter as Spectrally Shaped OFDM, employs band limited Nyquist shaped sub-carrier spectra. The research described in this thesis investigates the strengths and weaknesses of Spectrally Shaped OFDM as a potential modulation scheme for future mobile radio applications. From this research a novel Digital Signal Processing architecture for modulating and demodulating Spectrally Shaped OFDM sub-carriers has been derived which exploits the combination of a complex Discrete Fourier Transform (DFT) and PolyPhase Network (PPN) filter. This architecture is shown to significantly reduce the minimum number of computations required per symbol compared to previous designs. Using a custom coded computer simulation, the effects of varying the key parameters of the novel architecture's PolyPhase Filter (PPN) filter an the overall system complexity, spectral performance and system signal-to-distortion have been extensively studied. From these studies it is shown that compared to similar conventional OFDM systems, Spectrally Shaped OFDM systems possess superior out-of-band spectral qualities but significantly worse Peak-to-Average-Power-Ratio (PAPR) envelope performance. lt is also shown that the absolute value of the end PPN filter coefficients (dependent on the roll-off factor of the sub-carrier spectral shaping) dictate the system signal-to-distortion ratio when no time-domain windowing of the PPN filter coefficients is applied. Finally the effects of a both time and frequency selective fast fading channels on the modulation scheme's uncoded Bit Error Rate (BER) versus Signal-to-Noise (SNR) performance are simulated. The results obtained indicate that Spectrally Shaped OFDM is more robust (lower BER) to frequency-selective fading than time-selective fading

    An investigation into the use of orthogonal frequency division multiplexing in packet radio

    Get PDF
    Bibliography: leaves 56-58.The concept of Orthogonal Frequency Division Multiplexing has been around since the 1960s. It has resurfaced over the last decade as being the modulation scheme of choice in some newer technologies like Digital Video Broadcasting (DVB) and Asynchronous Digital Subscriber lines (ADSL). Amateur packet radio started in 1978 and has attracted thousands of enthusiasts from around the world. The interest in packet radio has waned over the years due advances in the data transmission capabilities oflandline systems and also more widespread access to the Internet. The purpose of this thesis was to develop a simple software simulation model to determine whether or not OFDM could be used to increase the data rates currently available in packet radio systems. The thesis starts out with an introduction to packet radio and OFDM in Chapter 1. A slightly more detailed discussion on OFDM is given in Chapter 2 in order to develop a basic specification for the proposed OFDM model. Chapters 2,3 and 4 discuss the development of the Transmitter model, the Receiver model and the Channel model respectively using the Simulink software package. Chapter 6 discusses the problem of Peak-to-Average Power Ratios (PAPR) in OFDM and explores the use of A-law companding to reduce this problem. In Chapter 7, the developed models are simulated and their performance compared to theoretical expectations. The full system is also simulated in this chapter in order to ascertain the possible data rate through the modelled packet radio channel. Conclusions regarding the application of OFDM to packet radio are presented in Chapter 8

    Virtual SATCOM, Long Range Broadband Digital Communications

    Get PDF
    The current naval strategy is based on a distributed force, networked together with high-speed communications that enable operations as an intelligent, fast maneuvering force. Satellites, the existing network connector, are weak and vulnerable to attack. HF is an alternative, but it does not have the information throughput to meet the distributed warfighting need. The US Navy does not have a solution to reduce dependency on space-based communication systems while providing the warfighter with the required information speed. Virtual SATCOM is a solution that can match satellite communications (SATCOM) data speed without the vulnerable satellite. It is wireless communication on a High Frequency (HF) channel at SATCOM speed. We have developed an innovative design using high power and gain, ground-based relay systems. We transmit extremely wide-wideband HF channels from ground stations using large directional antennas. Our system starts with a highly directional antenna with a narrow beam that enables increased bandwidth without interfering with other spectrum users. The beam focus and power provide a high SNR across a wideband channel with data rates of 10 Mbps; 1000 times increase in HF data speed. Our modeling of the ionosphere shows that the ionosphere has more than adequate bandwidth to communicate at 3000 km and high speeds while avoiding detection. We designed a flexible structure adjustable to the dynamic ionosphere. Our design provides a high-speed communications path without the geo-location vulnerability of legacy HF methods. Our invention will benefit mobile users using steerable beam forming apertures with wide bandwidth signals. This dissertation will focus on three areas: an examination of the ionosphere’s ability to support the channel, design of a phased array antenna that can produce the narrow beam, and design of signal processing that can accommodate the wideband HF frequency range. Virtual SATCOM is exciting research that can reduce cost and increase access to long-range, high data rate wireless communications

    Powerline Kommunikation: Wesentliche Technologien um PLC in CE-Geräte zu integrieren

    Get PDF
    In-house PLT (Powerline Telecommunication) enables new and highly convenient networking functions without the need for additional cables on mains-powered devices. Since wireless networks are not able to reach sufficient throughput between different rooms or even floors, PLC is considered to be the ideal backbone home network medium, providing complementary and seamless interaction with wireless networks. The need to communicate information is not new. The historical overview of this thesis compares the development of PLT to radio broadcast technologies. The consumer expects technologies to operate without interferences. Today, there are coexistence problems between these two technologies. Why does this happens, and how the problems can be resolved are the main issues of this thesis. Initial calculations of the channel capacity provide encouraging results for using the mains cabling as a communication medium. Chapter 3 forecasts how PLT modems could develop in the future. The usage of frequencies above 30 MHz will increase the throughput rate. Next, the utilization of the 3rd wire (the protective earth) for communication enhances the coverage and the reliability of powerline transmissions. The reception of common mode signals and the usage of MIMO technologies enable 8 transmission paths between one pair of outlets, which improves the performance of the bad, strongly attenuated channels. Today, the main challenge for the mass deployment of PLT is the lack of harmonized international standards on interoperability and electromagnetic interference. The absence of a standard results in the undesirable situation of PLT modems interfering with technologies from different vendors and also with radio applications. Solutions for solving these problems are given in chapter 4 and chapter 5. The approach of ‘Smart Notching’ - monitoring the existence of receivable radio broadcast stations at the time and location where a PLT modem is operating, received wide resonance in the PLT and radio broadcast communities. ‘Smart Notching’, also called ‘Dynamic Notching’ or ‘Adaptive Notching’ is considered to be the key factor in solving the endless discussions about the interferences to HF radio broadcast. Details on the creation of ETSI TS 102 578 and the implementation of a demonstrator system is documented in chapter 5. Field tests conducted together with the EBU verified the efficiency of the concept. The jointly executed tests by representatives from the radio broadcast and the PLT communities became a historical event which brought the two technologies, radio receivers and PLT modems, back into one house. Finally, a vision of the future coordination of EMC and conclusions are presented.Heutige Modems zur Powerline Telekommunikation (PLT) können im Betrieb den Empfang von Kurzwellen-Rundfunk beeinträchtigen, wenn Modem und Rundfunk-Empfänger in unmittelbarer Nachbarschaft betrieben werden. Eine neue Generation von PLT Modems, in denen das Konzept von 'Smart Notching' - dem intelligenten Einfügen von Lücken in das Kommunikationsspektrum - implementiert ist, zeigt keine Interferenzen mit dem Empfang von Rundfunkdiensten. Das Rauschen auf der Niederspannungsinstallation enthält neben sonstigen Signalen - durch andere Geräte hervorgerufen - aufgrund der Antennenwirkung Information über Rundfunksender. Beim ‚Smart Notching’ erkennen PLT Modems am Betriebsort die Existenz von Rundfunksignalen, indem sie das Signalspektrum auf der Netzleitung messen. Die Echtzeit- Bewertung der aktuellen Situation am Betriebsort ermöglicht eine Adaption des PLT Systems. Damit wird die Elektromagnetische Verträglichkeit nicht a priori (zum Herstellungs-Zeitpunkt) durch Schirmung oder eine globale Reduktion des Sendepegels, sondern durch Design des Verfahrens (welches während des Betriebs angewendet wird) hergestellt. Diese Doktorarbeit beschreibt nach einem kurzen Überblick zur Historie des Rundfunks und der Datenübertragung über das Energieverteilnetz Messungen zur Ermittlung der theoretischen Kanalkapazität. Anschließend wird ein Ausblick gegeben, wohin sich zukünftige PLT Modems entwickeln werden. Dies sind vor allem der Frequenzbereich oberhalb von 30 MHz sowie die Nutzung der dritten Kupferader in den Netzleitungen: der Schutzerde. Die Verwendung von MIMO-Algorithmen (aus der kabellosen Funkübertragung (z.B. WiFi) bereits bekannt) verbessert vor allem die Wahrscheinlichkeit, eine hohe Datenrate im Gebäude sicher zu verteilen. Sorge bereitet bei PLT ebenfalls die Koexistenz mit weiteren PLT-Systemen, sowie zu xDSL. Hierfür wird ein Vorschlag gemacht, um die Interferenzen zu nicht kompatiblen PLToder DSL-Systemen zu vermeiden, ohne dass die Systeme sich gegenseitig gezielt Informationen zusenden. Das bereits oben erwähnte Konzept des ‚Smart Notching’ wird detailliert erläutert und die Implementierung eines Demonstrators auf FPGA-Basis dokumentiert. Abschließend wird noch beschrieben, wie ‚Smart Notching’ gemeinsam mit der EBU getestet wurde und wie es seinen Weg in die Welt der Standardisierung gefunden hat. Der Veröffentlichung des Standards ETSI TS 102 578 wurde im Juli 2008 einstimmig von ETSI PLT zugestimmt

    Distributed Digital Radios for Land Mobile Radio Applications

    Get PDF
    The main objective of this dissertation is to develop the second generation of Distributed Digital Radio (DDR) technology. A DDR II modem provides an integrated voice/data service platform, higher data rates and better throughput performance as compared to a DDR I modem. In order to improve the physical layer performance of DDR modems an analytical framework is first developed to model the Bit Error Rate (BER) performance of Orthogonal Frequency Division Multiplexing over Frequency Modulation (OFDM/FM) systems. The use of OFDM provides a spectrally efficient method of transmitting data over LMR channels. However, the high Peak-to-Average (PAR) of OFDM signals results in either a low Signal-to-Noise Ratio (SNR) at FM receiver or a high non-linear distortion of baseband signal in the FM transmitter. This dissertation presents an analytical framework to highlight the impact of high PAR of OFDM signal on OFDM/FM systems. A novel technique for reduction of PAR of OFDM called Linear Scaling Technique (LST) is developed. The use of LST mitigates the signal distortion occurring in OFDM over FM systems. Another important factor which affects the throughput of LMR networks is the Push-to-Talk (PTT) delay. A PTT delay refers to the delay between the instant when a PTT switch on a conventional LMR radio is keyed/unkeyed and a response is observed at the radio output. It can be separated into a Receive-To-Transmit Switch Interval (RTSI) or a Transmit-To-Receive Switch Interval (TRSI). This dissertation presents the typical RTSI delay values, distributions and their impact on throughput performance of LMR networks. An analytical model is developed to highlight the asymmetric throughput problem and the unintentional denial of service (UDOS) occurring in heterogeneous LMR networks consisting of radios with different PTT delay profiles. This information will be useful in performance and capacity planning of LMR networks in future

    A Simulation Study of Cooperative Communications over HF Channels

    Get PDF
    The High Frequency (HF) band lies within 2-30 MHz of the electromagnetic spectrum. In this part of the spectrum, propagation via direct wave, surface wave, and ionospheric refraction mechanisms provides means of communications from line-of-sight to beyond-line-of-sight ranges. The characteristics of ionospheric channel impose fundamental limitations on the performance of HF communication systems. The major impairment is fading which results in random fluctuations in the received signal level and affects the instantaneous signal-to-noise ratio. This requires the deployment of powerful diversity techniques to mitigate the degrading effects of fading on the performance. The range of wavelengths in HF band unfortunately restricts the use of spatial diversity (i.e., deployment of multiple antennas) for most practical purposes. This thesis focuses on an alternative method to exploit the spatial dimension of the HF channel. Specifically, we aim to extract distributed spatial diversity through relay-assisted transmission. Towards this main goal, we consider multi-carrier HF communication and investigate the performance of cooperative OFDM over HF channels
    • …
    corecore