Acoustic simultaneous localization and mapping (A-SLAM) of a moving microphone array and its surrounding speakers

Acoustic scene mapping creates a representation of positions of audio sources such as talkers within the surrounding environment of a microphone array. By allowing the array to move, the acoustic scene can be explored in order to improve the map. Furthermore, the spatial diversity of the kinematic array allows for estimation of the source-sensor distance in scenarios where source directions of arrival are measured. As sound source localization is performed relative to the array position, mapping of acoustic sources requires knowledge of the absolute position of the microphone array in the room. If the array is moving, its absolute position is unknown in practice. Hence, Simultaneous Localization and Mapping (SLAM) is required in order to localize the microphone array position and map the surrounding sound sources. In realistic environments, microphone arrays receive a convolutive mixture of direct-path speech signals, noise and reflections due to reverberation. A key challenge of Acoustic SLAM (a-SLAM) is robustness against reverberant clutter measurements and missing source detections. This paper proposes a novel bearing-only a-SLAM approach using a Single-Cluster Probability Hypothesis Density filter. Results demonstrate convergence to accurate estimates of the array trajectory and source positions

A Geometric Approach to Sound Source Localization from Time-Delay Estimates

This paper addresses the problem of sound-source localization from time-delay estimates using arbitrarily-shaped non-coplanar microphone arrays. A novel geometric formulation is proposed, together with a thorough algebraic analysis and a global optimization solver. The proposed model is thoroughly described and evaluated. The geometric analysis, stemming from the direct acoustic propagation model, leads to necessary and sufficient conditions for a set of time delays to correspond to a unique position in the source space. Such sets of time delays are referred to as feasible sets. We formally prove that every feasible set corresponds to exactly one position in the source space, whose value can be recovered using a closed-form localization mapping. Therefore we seek for the optimal feasible set of time delays given, as input, the received microphone signals. This time delay estimation problem is naturally cast into a programming task, constrained by the feasibility conditions derived from the geometric analysis. A global branch-and-bound optimization technique is proposed to solve the problem at hand, hence estimating the best set of feasible time delays and, subsequently, localizing the sound source. Extensive experiments with both simulated and real data are reported; we compare our methodology to four state-of-the-art techniques. This comparison clearly shows that the proposed method combined with the branch-and-bound algorithm outperforms existing methods. These in-depth geometric understanding, practical algorithms, and encouraging results, open several opportunities for future work.Comment: 13 pages, 2 figures, 3 table, journa

Microphone array signal processing for robot audition

Robot audition for humanoid robots interacting naturally with humans in an unconstrained real-world environment is a hitherto unsolved challenge. The recorded microphone signals are usually distorted by background and interfering noise sources (speakers) as well as room reverberation. In addition, the movements of a robot and its actuators cause ego-noise which degrades the recorded signals significantly. The movement of the robot body and its head also complicates the detection and tracking of the desired, possibly moving, sound sources of interest. This paper presents an overview of the concepts in microphone array processing for robot audition and some recent achievements

Sound Localization for Robot Navigation

Non

Implementation of an Autonomous Impulse Response Measurement System

Data collection is crucial for researchers, as it can provide important insights for describing phenomena. In acoustics, acoustic phenomena are characterized by Room Impulse Responses (RIRs) occurring when sound propagates in a room. Room impulse responses are needed in vast quantities for various reasons, including the prediction of acoustical parameters and the rendering of virtual acoustical spaces. Recently, mobile robots navigating within indoor spaces have become increasingly used to acquire information about its environment. However, little research has attempted to utilize robots for the collection of room acoustic data. This thesis presents an adaptable automated system to measure room impulse responses in multi-room environments, using mobile and stationary measurement platforms. The system, known as Autonomous Impulse Response Measurement System (AIRMS), is divided into two stages: data collection and post-processing. To automate data collection, a mobile robotic platform was developed to perform acoustic measurements within a room. The robot was equipped with spatial microphones, multiple loudspeakers and an indoor localization system, which reported real time location of the robot. Additionally, stationary platforms were installed in specific locations inside and outside the room. The mobile and stationary platforms wirelessly communicated with one another to perform the acoustical tests systematically. Since a major requirement of the system is adaptability, researchers can define the elements of the system according to their needs, including the mounted equipment and the number of platforms. Post-processing included extraction of sine sweeps and the calculation of impulse responses. Extraction of the sine sweeps refers to the process of framing every acoustical test signal from the raw recordings. These signals are then processed to calculate the room impulse responses. The automatically collected information was complemented with manually produced data, which included rendering of a 3D model of the room, a panoramic picture. The performance of the system was tested under two conditions: a single-room and a multiroom setting. Room impulse responses were calculated for each of the test conditions, representing typical characteristics of the signals and showing the effects of proximity from sources and receivers, as well as the presence of boundaries. This prototype produces RIR measurements in a fast and reliable manner. Although some shortcomings were noted in the compact loudspeakers used to produce the sine sweeps and the accuracy of the indoor localization system, the proposed autonomous measurement system yielded reasonable results. Future work could expand the amount of impulse response measurements in order to further refine the artificial intelligence algorithms